Open Access
| Issue |
MATEC Web Conf.
Volume 269, 2019
IIW 2018 - International Conference on Advanced Welding and Smart Fabrication Technologies
|
|
|---|---|---|
| Article Number | 06001 | |
| Number of page(s) | 6 | |
| Section | Marine and Offshore | |
| DOI | https://doi.org/10.1051/matecconf/201926906001 | |
| Published online | 22 February 2019 | |
- www.ewm-group.com/en/products/weldingmachines-ewm.html. [Google Scholar]
- Berto, Filippo, A. Vinogradov, and S. Filippi, Int. J. Fatigue, 101, 371-384 (2017): [CrossRef] [Google Scholar]
- P.J. Haagensen, S.J. Maddox, IIW Recommendations on Post Weld Fatigue Life Improvement of Steel and Aluminium Structures, (W. Pub. Ltd., Camb. 2013). [Google Scholar]
- G. Marquis and Z. Barsoum, XIII-2453r1 (2013). [Google Scholar]
- R. T. Yekta, K. Ghahremani, and S. Walbridge, Int. J. Fatigue, 55, 245-256 (2013). [CrossRef] [Google Scholar]
- K. Yuan. Dissertation, Grad. Sc. Eng, Yo. Nat. Uni. (Sept. 2015). [Google Scholar]
- P. S. Hakimi and M. Al-Emrani, Post weld treatment Implementation on bridges with special focus on HFMI, (Chal.Uni.Tech Rep. 2014). [Google Scholar]
- F. B. Yalchiner and Z. Barsoum, Procedia Struct. Integr., 5, 377-384 (2017). [CrossRef] [Google Scholar]
- M. Leitner, M. Stoschka, R. Schanner, and W. Eichlseder, FME Trans., 40, 3, 99-104 (2012). [Google Scholar]
- M. Leitner, M. Stoschka, and W. Eichlseder, IIWDocument XIII-2416-12 (2012). [Google Scholar]
- M. Leitner, D. Simunek, S. F. Shah, and M. Stoschka, Adv. Eng. Softw., 0, 1-11 (2015). [Google Scholar]
- M. Leitner and M. Stoschka, J. Eng and Technol, 1, 3, 80-90 (2013). [Google Scholar]
- M. Leitner, Z. Barsoum, and F. Schäfers, Weld. World, 60, 3, 581-592 (2016). [CrossRef] [Google Scholar]
- Y. H. P. Manurung, M. A. Mohamed, and A. Z. Abidin, Int. J. Adv. Manuf. Technol., 90, 9, 3575-3583 (2017). [CrossRef] [Google Scholar]
- F. Schäfers, P. Gerster, and M. Leitner, XIII-WG2146, IIW (2015). [Google Scholar]
- J. Foehrenbach, V. Hardenacke, and M. Farajian, Weld. World, 60, 4, 749-755 (2016). [Google Scholar]
- G. B. Marquis and Z. Barsoum, Procedia Eng., 66, 98-107 (2013). [CrossRef] [Google Scholar]
- P. Gerster, F. Schäfers, and M. Leitner, Document XIII-WG2, IIW, 138, 1-11 (2013). [Google Scholar]
- G. M. Bertil Jonsson, G. Dobmann, A. F. Hobbacher, M. Kassner, Spr. Int. Publ (2016). [Google Scholar]
- J. Billingham, J. V. Sharp, J. Spurrier, and P. J. Kilgallon, Rev. Perform. high strength steels used offshore., (ISBN 0 7176 2205 3. 2003). [Google Scholar]
- http://ds.arcelormittal.com/repo/Technical Data Sheets/Plates S460G2 M.pdf. [Google Scholar]
- AWS D1.1, B2.1 Specification for Welding Procedure and Performance Qualification (2004). [Google Scholar]
- AWS D1.1/D1.1M, Section 4.8 the essential variable limitations (2015). [Google Scholar]
- AWS D1.1/D1.1M, Section 4 clause 4.9.3.5, the acceptance criteria (2015). [Google Scholar]
- AWS D1.1/D1.1M, Section 4 clause 4.9.3.3, the acceptance criteria (2015). [Google Scholar]
- Z. B. Marquis, Gary B, IIW Recommendations for the HFMI treatment (2016). [Google Scholar]
- A. Hobbacher, IIW Doc. IIW-1823-07 ex XIII-2151r4-07/XV-1254r4-07, 1-149 (2008). [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.