Open Access
Issue
MATEC Web Conf.
Volume 269, 2019
IIW 2018 - International Conference on Advanced Welding and Smart Fabrication Technologies
Article Number 02003
Number of page(s) 5
Section Advanced Welding Processes
DOI https://doi.org/10.1051/matecconf/201926902003
Published online 22 February 2019
  1. Lee S.S., Kim T.H., Hu S.J., Cai W.W. and Abell J. A., “Joining technologies for automotive lithiumion battery manufacturing: a review,” ASME Conf. Proc., Vol. 1, pp. 541-549, Oct. 2010. [Google Scholar]
  2. Macwan A., Kumar A. and Chen D.L. “Ultrasonic spot welded 6111-T4 aluminum alloy to galvanized high-strength low-alloy steel: microstructure and mechanical properties.”, Mater Design, vol. 113, pp. 284-296, Oct. 2017. [CrossRef] [Google Scholar]
  3. Raj N.M., Kumaraswamidhas L.A., Nalajam P.K. and Vendan S.A., “Studies on Electro Mechanical Aspects in Ultrasonically Welded Al/Cu Joints”, Trans Indian Inst Met, PP. 1-10, May. 2017. [Google Scholar]
  4. Patel V.K., Bhole S.D. and Chen, D. L., “Microstructure and mechanical properties of dissimilar welded Mg-Al joints by ultrasonic spot welding technique.” Sci Technol Weld Joi, vol. 17(3), pp. 202-206, 2012. [CrossRef] [Google Scholar]
  5. Bakavos, D., and Prangnell, P. B., 2010, “Mechanisms of Joint and Microstructure Formation in High Power Ultrasonic Spot Welding 6111 Aluminium Automotive Sheet”, Mater. Sci. Eng., A, vol. 527(23), pp. 6320-6334.2010 [CrossRef] [Google Scholar]
  6. Fujii H.T., Endo H., Sato Y.S. and Kokawa H., “Interfacial microstructure evolution and weld formation during ultrasonic welding of Al alloy to Cu”, Mate Charact, vol. 139, pp. 233-240, 2018. [CrossRef] [Google Scholar]
  7. Shen N., Samanta A., ding H. and Cai W.W., “Simulating microstructure evolution of ultrasonic welding of battery tabs”, 44th Proceedings of the North American Manufacturing, vol. 5, pp. 399-416, 2016. [Google Scholar]
  8. Lee S.S., Kim T.H., Hu S.J., Cai W.W., Abell J.A. and Li J.J., “Characterization of joint quality in ultrasonic welding of battery tabs”, J Manuf Sci E, vol. 135, pp. 021004-1-13, Apr. 2013. [Google Scholar]
  9. Wu X., Liu T. and Cai W., “Microstructure welding mechanism and failure of Al/Cu ultrasonic welds”, J Manuf Proc, vol. 20, pp. 515-524, 2015. [CrossRef] [Google Scholar]
  10. Lee S.S., Kim T.H., Hu S.J., Cai W.W. and Abell J.A., “Analysis of weld formation in multilayer ultrasonic metal welding using high-speed images”, J Manuf Sci E, vol. 137, pp. 031016-1-8, June. 2015. [Google Scholar]
  11. Lee D. and Cai W., “The effect of horn knurl geometry on battery tab ultrasonic welding quality: 2D finite element simulations”, J Manuf Proc, vol. 28, pp. 428-441, 2017. [Google Scholar]
  12. Kang B.S., Cai W. and Tan C.A., “Vibrational energy loss analysis in battery tab ultrasonic welding”, J Manuf Proc, vol. 16, pp. 218-232, 2014. [CrossRef] [Google Scholar]
  13. Hetrick, E., Baer, J., Zhu, W., Reatherford, L., Grima, A., Scholl, D., Wilkosz, D., Fatima, S., and Ward, S., 2009, “Ultrasonic Metal Welding Process Robustness in Aluminum Automotive Body Construction Applications,” Weld. J., 88(7), pp. 149S-158S. [Google Scholar]
  14. Zhao J.Z., Li H., Choi H., Cai W., Abell J.A. and Li X.C., “Insertable thin film thermocouples for in situ transient temperature monitoring in ultrasonic metal welding of battery tabs”, J Manuf Proc, vol. 15, pp. 136-140, 2013. [Google Scholar]
  15. Zhang C.Q., Robson J.D., Ciuca O. and Prangnell P.B., “Microstructural characterization and mechanical properties of high power ultrasonic spot welded aluminum alloy AA6111-TiAl6V4 dissimilar joints”, Mater Charact, vol. 97, pp. 83-91, Sep. 2014. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.