MATEC Web of Conferences

Open Access

Optimizing the mechanical device of a mono-axial sun tracking mechanism 01001

Cătălin Alexandru

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818401001

• Abstract
• PDF (406.3 KB)
• References

Open Access

Optimizing the control system of a single-axis sun tracking mechanism 01002

Cătălin Alexandru

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818401002

• Abstract
• PDF (396.8 KB)
• References

Open Access

Dynamical analysis of a 2-degrees of freedom spatial pendulum 01003

Stelian Alaci, Florina-Carmen Ciornei, Sorinel-Toderas Siretean, Mariana-Catalina Ciornei and Gabriel Andrei Ţibu

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818401003

• Abstract
• PDF (384.6 KB)
• References

Open Access

Continuous and discrete models in the mechanics of deformable solid bodies 01004

Géza Lámer

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818401004

• Abstract
• PDF (416.0 KB)
• References

Open Access

Vibroacoustics and psychoacoustics investigation of biodegradable composites for musical instruments 01005

Jorge Segura Alcaraz, José María Gadea Borrell, Ernesto Juliá Sanchis, José Enrique Crespo Amorósl, Isaac Montava Belda and Sofía Rebagliato Torregrosa

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818401005

• Abstract
• PDF (552.0 KB)
• References

Open Access

Aspects regarding the experimental research of the stressors of the human pregnancy in case of road events 01006

Alexandru Thierheimer, Cătălin Alexandru and Walter Thierheimer

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818401006

• Abstract
• PDF (777.9 KB)
• References

Open Access

Study regarding the influence of airbag deployment time on the occupant injury level during a frontal vehicle collision 01007

Alexandru Ionut Radu, Corneliu Cofaru, Bogdan Tolea and Dragoş Dima

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818401007

• Abstract
• PDF (1.080 MB)
• References

Open Access

An improved model for the damped impact of composite materials applicable to wind turbine blades 01008

Florina-Carmen Ciornei, Stelian Alaci, Sorinel-Toderas Siretean and Mariana-Catalina Ciornei

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818401008

• Abstract
• PDF (406.4 KB)
• References

Open Access

Considerations on finding the rolling and spinning friction coefficients 01009

Florina-Carmen Ciornei, Stelian Alaci, Sorinel-Toderas Siretean, Mariana-Catalina Ciornei, Ioan-Bogdan Dragoi and Vlăduţ-Constantin Lazăr

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818401009

• Abstract
• PDF (449.4 KB)
• References

Open Access

Graphical-analytical analysis of the mechanism with rotating cam and flat-face follower 01010

Stelian Alaci, Florina-Carmen Ciornei, Sorinel-Toderas Siretean and Mariana-Catalina Ciornei

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818401010

• Abstract
• PDF (359.2 KB)
• References

Open Access

Analysis of the Evolution of the Number of Fatal Road Accidents in Romania 01011

Lucian Tarnu and Cristian Deac

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818401011

• Abstract
• PDF (415.6 KB)
• References

Open Access

Considerations on the Right of Way as Cause of Road Accidents in Romania 01012

Lucian Tarnu and Cristian Deac

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818401012

• Abstract
• PDF (498.1 KB)
• References

Open Access

Research on combustion process of gasoline homogenous charge compression ignition engine 01013

Corneliu Cofaru and Mihaela Virginia Popescu

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818401013

• Abstract
• PDF (465.7 KB)
• References

Open Access

The possibility of extending work time of tribocouple welding improved stainless steel with improved carbon steel 01014

Vlatko Marušić, Predrag Dašić and Ivan Opačak

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818401014

• Abstract
• PDF (794.6 KB)
• References

Open Access

Selection criteria of optimal characteristic material and technologies for precision processing of basic working surface of human hip-joint implant 01015

Raul Turmanidze, Predrag Dašić and Giorgi Popkhadze

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818401015

• Abstract
• PDF (700.6 KB)
• References

Open Access

Thermal degradation and stability of wood particle composites deployed as decorative components 01016

Dana Luca Motoc, Santiago Ferrándiz Bou and Adrian Petru Pop

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818401016

• Abstract
• PDF (413.5 KB)
• References

Open Access

Contribution to experimental research of alternate fuel fumigation in single cylinder research diesel engine 01017

Doru Baldean, Dan Moldovanu and Adela-Ioana Borzan

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818401017

• Abstract
• PDF (514.5 KB)
• References

Open Access

Contributions on experimental research of fuel consumption and management system in K9K892 Diesel engine from Dacia-Renault 01018

Doru Baldean and Adela-Ioana Borzan

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818401018

• Abstract
• PDF (747.0 KB)
• References

Open Access

Numerical analysis of the injection law influence on NOx emissions for a compression ignited engine 01019

Dan Moldovanu and Florin Mariaşiu

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818401019

• Abstract
• PDF (1.034 MB)
• References

Open Access

Comparative analysis of automatic transmission and manual transmission behaviour on the worldwide harmonized light duty test cycle 01020

Norbert Bagameri, Bogdan Varga, Aron Csato and Dan Moldovanu

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818401020

• Abstract
• PDF (646.4 KB)
• References

Open Access

Optimization of shifting strategy for a dual clutch transmission through mathematical model 01021

Norbert Bagameri, Bogdan Varga, Aron Csato and Dan Moldovanu

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818401021

• Abstract
• PDF (486.9 KB)
• References

Open Access

Influence of swirl and tumble motion inside the combustion chamber of a compression ignited engine on vertices formation 01022

Dan Moldovanu, Florin Mariașiu and Norbert Bagameri

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818401022

• Abstract
• PDF (642.4 KB)
• References

Open Access

Determine of the wave equation in the task of electrical oscillations 01023

Gordana V. Jelić, Vladica Stanojević and Dragana Radosavljević

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818401023

• Abstract
• PDF (293.1 KB)
• References

Open Access

Snow fence load on a house roof with tiles 02001

Cornel Cătălin GavrilĂ and Mihai -Tiberiu LateŞ

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818402001

• Abstract
• PDF (562.7 KB)
• References

Open Access

On the benchmarking of friction in timing chains 02002

Lenard Jurj and Radu Velicu

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818402002

• Abstract
• PDF (463.0 KB)
• References

Open Access

Geometry of silent chain - involute sprocket 02003

Lenard Jurj, Radu Velicu and Radu Săulescu

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818402003

• Abstract
• PDF (365.2 KB)
• References

Open Access

The comparative study of the static friction coefficient between chain link and different types of polyamides 02004

Radu Papuc and Mihai-Tiberiu Lates

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818402004

• Abstract
• PDF (639.2 KB)
• References

Open Access

Determining the optimal operating parameters of a wind system 02005

Cornel Cătălin Gavrilă and Radu Săulescu

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818402005

• Abstract
• PDF (450.3 KB)
• References

Open Access

Modeling in ADAMS of a 6R industrial robot 02006

Mariana Ratiu, Alexandru Rus and Monica Loredana Balas

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818402006

• Abstract
• PDF (1.154 MB)
• References

Open Access

Android application for ocular training in amblyopia 02007

Daniela Mariana Barbu

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818402007

• Abstract
• PDF (686.6 KB)
• References

Open Access

Device for persons with low vision 02008

Vlad Horațiu Sîrbu and Daniela Mariana Barbu

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818402008

• Abstract
• PDF (594.4 KB)
• References

Open Access

Internet of things and machine parts laboratory 02009

Dan Ioan Țarcă, Radu Cătălin Țarcă and Ioan Constantin ȚarcȚ

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818402009

• Abstract
• PDF (574.3 KB)
• References

Open Access

Mechatronical system used for the recovery of motor functions 02010

Roxana Andreiaş and Daniela Mariana Barbu

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818402010

• Abstract
• PDF (375.3 KB)
• References

Open Access

Automatic fuel tank monitoring, tracking & theft detection system 02011

Khuwaja Komal D/o Shoukat Ali, Brohi Arif Ali, Vlad O. Mihalca and Țarcă Radu Cătălin

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818402011

• Abstract
• PDF (506.9 KB)
• References

Open Access

Analysis of gait recognition system developed in NI LabVIEW 02012

Dániel Salánki and Kornél Sarvajcz

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818402012

• Abstract
• PDF (634.6 KB)
• References

Open Access

Designing a delta tripod based robot fused deposition modelling 3 dimensional printer using an open-source Arduino development platform 02013

Tamás Templom, Timotei István Erdei, Zsolt Molnár, Edwin Shaw and Géza Husi

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818402013

• Abstract
• PDF (443.9 KB)
• References

Open Access

Redesigning of the gripping system on KUKA KR5 by utilizing 3 dimension printing technologies and Arduino 02014

Viktor Varga, Timotei István Erdei and Géza Husi

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818402014

• Abstract
• PDF (890.0 KB)
• References

Open Access

Modelling and simulation of a series wound direct current motor using ANSYS 02015

István Kovács and Kornél Sarvajcz

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818402015

• Abstract
• PDF (784.9 KB)
• References

Open Access

Measuring drone flight-stability using computer vision 02016

Dávid Dezső; and Kornél Sarvajcz

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818402016

• Abstract
• PDF (484.3 KB)
• References

Open Access

Homes of the Future 02017

Bence Kovács and János Tóth

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818402017

• Abstract
• PDF (753.7 KB)
• References

Open Access

Comparison between proportional, integral, derivative controller and fuzzy logic approaches on controlling quarter car suspension system 02018

Ahmet Mehmet Karadeniz, Alsabbagh Ammar and Husi Dr.Geza

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818402018

• Abstract
• PDF (384.1 KB)
• References

Open Access

Three phase induction motor modelling and control using vector control in LabVIEW 02019

Khoury Wadee, Nasser Aram and Tamás Szemes Péter

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818402019

• Abstract
• PDF (478.9 KB)
• References

Open Access

Robust control system design for a brushed direct current motor using LabVIEW simulation loop 02020

Wadee Khoury and Péter Tamás Szemes

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818402020

• Abstract
• PDF (407.4 KB)
• References

Open Access

Withdrawn article: Digital photoplethysmograph 02021

Pater Sorin, Augustin-Gavril Pop and Ovidiu Gheorghe Moldovan

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818402021

• Abstract

Open Access

The maintenance, commissioning of FANUC M-1iA 0.5A type selecting robot and implementation of iRVision picture-recognizing procedure 02022

Gyula Korsoveczki, Géza Husi and Timotei István Erdei

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818402022

• Abstract
• PDF (502.2 KB)
• References

Open Access

The influence of profile angle on forces distribution on silent chain transmissions 02023

Radu Velicu, Lenard Jurj and Radu Săulescu

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818402023

• Abstract
• PDF (403.7 KB)
• References

Open Access

T3D end milling finite element thermal analysis 03001

Andjelija. Mitrović, Pavel. Kovač, Nenad. Kulundžić, Borislav. Savković and Ildiko. Mankova

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818403001

• Abstract
• PDF (439.2 KB)
• References

Open Access

Study of functional parameters of a conveyor by modeling and simulation 03002

Florin Blaga and Iulian Stanasel

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818403002

• Abstract
• PDF (722.7 KB)
• References

Open Access

A brief overview of the evolution and trends in maintenance 03003

Eugen Pămîntaş and Felicia veronica Banciu

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818403003

• Abstract
• PDF (358.9 KB)
• References

Open Access

Reverse engineering and CAD-CAM approach for manufacturing of spare parts. Case study 03004

Iulian Stănăşel, Florin Blaga, Traian Buidoş and Dan Crăciun

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818403004

• Abstract
• PDF (633.4 KB)
• References

Open Access

Considerations on determining the explosion risk and the areas with explosion hazard in a natural gas compressor station 03005

Alina Maria Gligor and Valentin Petrescu

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818403005

• Abstract
• PDF (491.3 KB)
• References

Open Access

Contribution for increasing the manufacturing companies productivity using a tracking and planning production program 03006

Iaroslav Francisc Pişec and Alin Pop

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818403006

• Abstract
• PDF (1.343 MB)
• References

Open Access

Considerations on the automation of a natural gas compressor station 03007

Alina Maria Gligor

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818403007

• Abstract
• PDF (436.7 KB)
• References

Open Access

The lubricants' parameters monitoring and data collecting 03008

Gavril Grebenişan, Nazzal Salem and Sanda Bogdan

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818403008

• Abstract
• PDF (671.1 KB)
• References

Open Access

An approach of classification and parameters estimation, using neural network, for lubricant degradation diagnosis 03009

Gavril Grebenişan, Nazzal Salem and Sanda Bogdan

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818403009

• Abstract
• PDF (1.401 MB)
• References

Open Access

Development of the method of direct temperature measurement for gear cutting of cylindrical gears by hob milling 03010

Sandra Sovilj-Nikić, Bogdan Sovilj, Dušan Ješić, Vladimir Blanuša, Vladimir M. Tonkonogyy and Liubov Bovnegra

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818403010

• Abstract
• PDF (845.0 KB)
• References

Open Access

Analysis of the tool life of coated hob milling tools for gear cutting of cylindrical gear 03011

Sandra Sovilj-Nikić, Bogdan Sovilj, Gyula Varga, Nicolae Ungureanu and Vladimir Blanuša

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818403011

• Abstract
• PDF (827.8 KB)
• References

Open Access

Aspects of Human Behaviour in Negotiation Process 04001

Dan Săvescu

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818404001

• Abstract
• PDF (277.6 KB)
• References

Open Access

Innovative architectural design development: the Arcbazar creative crowdsourcing contests perspective 04002

Adriana Bujor and Silvia Avasilcai

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818404002

• Abstract
• PDF (406.7 KB)
• References

Open Access

Sensitivity of indicators used in cost-volume-profit analysis 04003

Carmen-Elena Stoenoiu

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818404003

• Abstract
• PDF (367.1 KB)
• References

Open Access

Comparative analysis for estimating production costs 04004

Carmen-Elena Stoenoiu

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818404004

• Abstract
• PDF (381.7 KB)
• References

Open Access

Education and training in Romania on occupational safety and health in the offshore industry 04005

Mariana Ratiu, Corina Suteu and Ioan-Florin Oarga

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818404005

• Abstract
• PDF (232.1 KB)
• References

Open Access

A multi-criteria decision making approach for public lighting system selection 04006

Maria Cristea, Radu Adrian Tîrnovan, Ciprian Cristea, Constantin Sorin Pică and Cristian Făgărășan

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818404006

• Abstract
• PDF (576.3 KB)
• References

Open Access

A multi-criteria decision making approach in lighting technology selection for a production hall 04007

Maria Cristea, Radu Adrian Tîrnovan, Ciprian Cristea and Constantin Sorin Pică

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818404007

• Abstract
• PDF (567.3 KB)
• References

Open Access

The influence of dividend policy on the volatility of shares in the Romanian equity capital market 04008

Ciprian Cristea and Maria Cristea

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818404008

• Abstract
• PDF (294.2 KB)
• References

Open Access

Cash conversion cycle and corporate performance: evidence from Romania 04009

Ciprian Cristea and Maria Cristea

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818404009

• Abstract
• PDF (318.4 KB)
• References

Open Access

The requirement elicitation process of designing a collaborative environment – The CRE@TIVE.BIZ case 04010

Lidia Alexa and Silvia Avasilcai

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818404010

• Abstract
• PDF (264.2 KB)
• References

Open Access

Value co – creation through crowdsourcing: The case of Squadhelp competition platform 04011

Elena Galateanu (Avram) and Silvia Avasilcai

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818404011

• Abstract
• PDF (361.0 KB)
• References

Open Access

Occupational health and safety risk management 04012

Ioan-Florin Oarga, Mariana Rațiu and Ioan-Tudor Oarga

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818404012

• Abstract
• PDF (288.5 KB)
• References

Open Access

Challenges in Romanian technical higher education from the perspective of the european requirements for its modernization 04013

Felicia Veronica Banciu and Eugen Pămîntaș

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818404013

• Abstract
• PDF (522.8 KB)
• References

Open Access

Absorption of management knowledge in Romanian small and medium-sized enterprises 04014

Gina-Maria Moraru and Daniela Popa

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818404014

• Abstract
• PDF (410.8 KB)
• References

Open Access

Strategic management problems in Romanian small and medium-sized enterprises 04015

Gina-Maria Moraru and Daniela Popa

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818404015

• Abstract
• PDF (531.8 KB)
• References

Open Access

Blockchain technology – a new approach in business environment 04016

Olga Bucovetchi, Dorel Badea and Radu D. Stanciu

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818404016

• Abstract
• PDF (331.9 KB)
• References

Open Access

Study on the degree of use and knowledge of digital marketing elements in Romanian small and medium enterprises 04017

Răzvan Mihai Dobrescu, Cristina Petronela Simion, Iuliana Grecu and Cristian Aurelian Popescu

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818404017

• Abstract
• PDF (303.8 KB)
• References

Open Access

Examination of fiscal expenditures on education and research as human capital investments 04018

Judit T. Kiss

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818404018

• Abstract
• PDF (666.4 KB)
• References

Open Access

Measuring the Innovation of Economy throught Global and European Tools 04019

Delia Marcela Pop and Mircea Teodor Pop

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818404019

• Abstract
• PDF (254.9 KB)
• References

Open Access

Analysis of supporting indicators for innovation in Romania compared to neighboring EU countries 04020

Bungau Constantin and Gherghea Ion Cosmin

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818404020

• Abstract
• PDF (932.4 KB)
• References

Open Access

Study on improving silicone losses in the process of mixing components of soldering machines 04021

Mihai Victor Zerbes and Liliana Georgeta Popescu

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818404021

• Abstract
• PDF (586.0 KB)
• References

Open Access

The asymmetry of income distribution between stakeholders within the framework of industrial park structures 04022

Andrey Plakhin, Igor Semenets and Ekaterina Ogorodnikova

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818404022

• Abstract
• PDF (304.3 KB)
• References

Open Access

New directions in the development of neuromarketing and behavioral economics 04023

Andrey Plakhin, Igor Semenets, Ekaterina Ogorodnikova and Maria Khudanina

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818404023

• Abstract
• PDF (398.3 KB)
• References

Open Access

Solving the problem of logistics center location based on the AHP method 04024

Sabina Kauf and Agnieszka Tłuczak

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818404024

• Abstract
• PDF (380.9 KB)
• References

Open Access

Allocation of logistic risk-investment in public-private-partnership – use of fuzzy TOPSIS method 04025

Sabina Kauf and Agnieszka Tłuczak

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818404025

• Abstract
• PDF (401.4 KB)
• References