EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 184 (2018) MATEC Web Conf., 184 (2018) 04020 References
Open Access
Issue
MATEC Web Conf.
Volume 184, 2018
Annual Session of Scientific Papers IMT ORADEA 2018
Article Number 04020
Number of page(s) 6
Section Management and Economics in Engineering
DOI https://doi.org/10.1051/matecconf/201818404020
Published online 31 July 2018
  1. Zeynep Tuğçe Şimşit, Özalp Vayvay, Özgen Öztürkc, An outline of innovation management process: building a framework for managers to implement innovation, Proceedings of the conference: Procedia - Social and Behavioral Sciences 150, pages 690 – 699 (2014). [CrossRef] [Google Scholar]
  2. Tim Stock, Michael Obenaus, Amara Slaymaker, Günther Seliger, A model for the development of sustainable innovations for the early phase of the innovation process, Proceedings of the conference: Procedia Manufacturing 8 pages 215 – 222 (2017). [CrossRef] [Google Scholar]
  3. C. I. Ivanov, S. Avasilcai, Performance measurement models: an analysis for measuring innovation processes performance, Proceedings of the conference: Procedia Social and Behavioral Sciences, Challenges and innovations in management and leadership 12th international symposium in management, Volume: 124, Pages: 397-404 (2014). [Google Scholar]
  4. S. Avasilcai, Performance evaluation in Romanian industrial organisations, Proceedings of the conference: Intelligent Manufacturing & Automation, Annals of daaam for 2007 & proceedings of the 18th International Daaam Symposium: Intelligent Manufacturing & Automation: focus on creativity, responsibility, and ethics of engineers, Pages: 27-28 (2007). [Google Scholar]
  5. V. Baesu, C.T. Albulescu, Z.B. Farkas, A. Draghici, Determinants of the high-tech sector innovation performance in the European Union: a review, Proceedings of the conference: Procedia Technology, Volume: 19, Pages: 371-378 (2015). [CrossRef] [Google Scholar]
  6. L. Bacali, R.C. Cordos, Intelligent Manufacturing & Automation, Study on the innovation activity in the Romanian firms, Proceedings of the conference: Proceedings of the Romanian Annals Of Daaam For 2007 & Proceedings Of The 18th International Daaam Symposium: Intelligent Manufacturing & Automation: Focus On Creativity, Responsibility, And Ethics Of Engineers, Pages: 41-42 (2007). [Google Scholar]
  7. https://tcdata360.worldbank.org/topics/inn?country=ROU, accessed in April, 2018. [Google Scholar]
  8. A. Draghici, C.F. Baban, M.L. Gogan, L.V. Ivascu, A Knowledge Management Approach for The University-Industry Collaboration in Open Innovation, Proceedings of the conference: Procedia Economics and Finance, Volume: 23, Pages: 23-32 (2015). [CrossRef] [Google Scholar]
  9. N. Barkoczi, L. Bacali, M. Lobontiu, Current status of the interferences between technology diffusin and marketing management, Proceedings of the conference: Management between profit and social responsability, Pages 324-331 (2014). [Google Scholar]
  10. S. Bungau, D. M. Tit, C. Iovan, L. Copolovici, R. Boscencu, G. Cioca, D. Copolovici, New method for Simultaneous Determination of Ascorbic and Acetylsalicylic Acids in effervescent Tablets, Rev Chim. – Bucharest, 68, nr. 11, pages 2495-2503 (2017). [Google Scholar]
  11. M. Badea, C. Chiperea, M. Balan, L. Floroian, P. Restani, J.L. Marty, C. Iovan, D. M. Tit, S. Bungau, N. Taus, New Approaches for Electrochimical Detection of Ascobic Acid, Farmacia, 66, nr. 1, pages 83-90, (2018). [Google Scholar]
  12. D. Mosteanu, G. Barsan, P. Otrisal, L. Giurgiu, R. Oancea, Obtaining the Volatile Oils from Wormwood and Tarragon Plants by a New Microwave Hydrodistilation Method, Revista de Chimie, 68 (11), pages 2499-2502, (2017). [Google Scholar]
  13. F. Blaga, C. Bungau, I. Stanasel, T. Vesseleniy, R. Pancu, D. Craciun, Researches regarding rotary-tilting table precision evaluation method using the ball-bar system, Academy Series a-Mathematics Physics Technical Sciences Information Science, Volume: 16 Issue: 4, Pages: 513-521 (2015). [Google Scholar]
  14. C. Bungau, R. Pancu, T. Buidos, Contributions to the Design of the Load Station Concept used at the Flexible Manufacturing Cell, Proceedings of the conference: Engineering Solutions and Technologies in Manufacturing, Volume: 657, Pages: 818-822 (2014). [Google Scholar]
  15. C. Bungau, M. Ganea, R. Pancu, New Tendency of Machine Tool Study Based on Virtual Machining Software Applied at University of Oradea, Industrial and Service Robotics, Volume: 613, Pages: 396-401 (2014). [Google Scholar]
  16. C. Bungau, F. Blaga, C. Gherghea, Kaizen implementation for cost reduction in manufacturing process product “driver control board, Proceedings of the conference: International Conference on Production Research - Regional Conference Africa, Europe and the Middle East, Pages: 55-58 (2014). [Google Scholar]
  17. C. Bungau, I. C. Gherghea, M. Prichici, Value Stream Mapping Analysis, Efficiency Methods of Operational Management, Proceedings of the conference: Twenty Years after: How Management Theory Works, Pages: 188-198 (2010). [Google Scholar]
  18. L. Ivascu, B. Cirjaliu, A. Draghici,, Business model for the university-industry collaboration in open innovation, Proceedings of the conference: Procedia Economics and Finance, Volume: 39, Pages: 674-678 (2016). [CrossRef] [Google Scholar]
  19. B.L. Blaga, L. Bacali, R.C. Cordos, Ethics - a priority within the 21st century's organizations, Proceedings of the conference: 2nd Review of Management and Economic Engineering International Management Conference Pages: 384-389 (2011). [Google Scholar]
  20. G. R. E. Maries, D. Chira, C. Bungau, T. Costea, L. Moldovan, Determining the Influence of the Processing Temperature by Injection and of the Subsequent Pressure on the Surface's Hardness and Indentation Modulus of the Products Made of HDPE, PMMA, PC plus ABS through Nanoindentation - G-Series Basic Hardness Modulus at a Depth Method, Materiale Plastice, Volume: 54 Issue: 2 Pages: 214-220 (2017). [Google Scholar]
  21. L. S. Csokmai, R. C. Tarca, C. Bungau, G. Husi,, A Comprehensive Approach to Off-line Advanced Error Troubleshooting in Intelligent Manufacturing Systems, International Journal of Computers Communications & Control, Volume: 10, Issue: 1, Pages: 30-37 (2015). [CrossRef] [Google Scholar]
  22. G. R. E. Maries, D. Chira, C. Bungau, The Influence of Processing Temperatures of (HDPE), (PMMA), (PC plus ABS) on Some Mechanical Properties of Items Obtained Through Injection, Materiale Plastice, Volume: 52, Issue: 4, Pages: 452-456 (2015). [Google Scholar]
  23. D. Chira, G. R. E. Maries, C. Bungau, The Influence of Subsequent Pressure of (HDPE), (PMMA), (PC plus ABS) on Some Mechanical Properties of Items Obtained Through Injection, Materiale Plastice, Volume: 52, Issue: 4, Pages: 572-577 (2015). [Google Scholar]
  24. M. Baban, C. F. Baban, C. Bungau, G. Dragomir, R. M. Pancu, Estimation of the Technical State of Automotive Disc Brakes Using Fuzzy Logic, International Journal of Computers Communications & Control, Volume: 9, Issue: 5, Pages: 531-538 (2014). [CrossRef] [Google Scholar]
  25. T. Vesselenyi, C. Bungau, G. Husi, Research equipment and computation techniques for Intelligent Building applications, Proceedings of the conference: International Symposium on System Integration, Pages: 228-233 (2014). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.