Issue |
MATEC Web Conf.
Volume 184, 2018
Annual Session of Scientific Papers IMT ORADEA 2018
|
|
---|---|---|
Article Number | 02004 | |
Number of page(s) | 4 | |
Section | Mechatronics and Robotics | |
DOI | https://doi.org/10.1051/matecconf/201818402004 | |
Published online | 31 July 2018 |
The comparative study of the static friction coefficient between chain link and different types of polyamides
1
Transilvania University of Brasov, Romania
2
Transilvania University of Brasov, Romania
* Corresponding author: radu.papuc@unitbv.ro
This paper has as scope the comparative analysis of the experimental study of the static friction coefficients between the chain links and two guide types (segments cut from the tensioning guide of the transmission chain used in combustion engines). Basically, this study will be performed for the contact between steel and different types of polyamides PA46 and PA66, using two tribometers. In the first stage there will be presented the tribometers, devices and work methods followed by the tests results. The next stage presents with the help of finite element analysis the contact pressure variation and displacements distribution. At the end of the paper there are presented the conclusions of the tests performed on the two tribometers.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.