MATEC Web of Conferences

Open Access

Preface 00001

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818300001

• Abstract
• PDF (77.61 KB)

Open Access

Identification of bottlenecks and analysis of the state before applying lean management 01001

Radosław Wolniak, Bożena Skotnicka-Zasadzień and Anna Gębalska-Kwiecień

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818301001

• Abstract
• PDF (271.2 KB)
• References

Open Access

Improving the efficiency of the production process using SMED 01002

Bożena Skotnicka-Zasadzień, Radosław Wolniak and Anna Gębalska-Kwiecień

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818301002

• Abstract
• PDF (245.7 KB)
• References

Open Access

Probabilistic Assessment of Road Risks for Improving Logistics Processes 01003

Abdelaziz Lakehal and Fouad Tachi

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818301003

• Abstract
• PDF (375.0 KB)
• References

Open Access

Analysis of problems during implementation of Lean Manufacturing elements 01004

Manuela Ingaldi, Szymon T. Dziuba and Anna Cierniak-Emerych

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818301004

• Abstract
• PDF (328.4 KB)
• References

Open Access

Safety in ensuring the quality of production - the role and tasks of standards requirements 01005

Adam Górny

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818301005

• Abstract
• PDF (247.0 KB)
• References

Open Access

Healthcare products and food supplements in Poland - a comparison 01006

Katarzyna Hys

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818301006

• Abstract
• PDF (239.2 KB)
• References

Open Access

Monitoring of information security system elements in the metallurgical enterprises 01007

Justyna Żywiołek

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818301007

• Abstract
• PDF (313.6 KB)
• References

Open Access

Interpretive Structural Modeling of identified Barriers to Lean Implementation in SMEs 01008

Arvind Kumar Shrimali, Vimlesh Kumar Soni and Shashank Singh Pawar

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818301008

• Abstract
• PDF (308.2 KB)
• References

Open Access

Accreditation of research in the thermo-climatic chamber - various aspects 01009

Artur Gawlik, Piotr Kucybała, Danuta Owczarek and Janusz Pobędza

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818301009

• Abstract
• PDF (291.3 KB)
• References

Open Access

ICT development on the example of selected software applied in manufacturing area 01010

Agnieszka Szczotok and Renata Dwornicka

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818301010

• Abstract
• PDF (262.3 KB)
• References

Open Access

Problems in waste management in the aspect of the secondary use of plastics from WEEE 01011

Katarzyna Kapustka, Gerhard Ziegmann and Dorota Klimecka-Tatar

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818301011

• Abstract
• PDF (287.3 KB)
• References

Open Access

Health problems among employees in small enterprises as a result of improper OHS management 01012

Marta Niciejewska and Dorota Klimecka-Tatar

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818301012

• Abstract
• PDF (233.6 KB)
• References

Open Access

Level of compliance with the requirements of corporate social responsibility in Czech enterprises 01013

Zdenka Hofbruckerová, Petra Halfarová and Andrea Uherková

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818301013

• Abstract
• PDF (259.9 KB)
• References

Open Access

Problems in the Implementation of the Lean Concept at a Steel Works - Case Study 01014

Adrian Maszke, Renata Dwornicka and Robert Ulewicz

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818301014

• Abstract
• PDF (290.3 KB)
• References

Open Access

Technological Resources Evaluation in the context of the micro-enterprise development 01015

Renata Stasiak-Betlejewska, Luminia Parv and Justyna Karolczyk

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818301015

• Abstract
• PDF (267.0 KB)
• References

Open Access

Analysis of the 5S method in production enterprise - case study 01016

Katarzyna Łyp-Wrońska and Bartłomiej Tyczyński

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818301016

• Abstract
• PDF (414.3 KB)
• References

Open Access

Selected problems of designing modern industrial databases 01017

Dariusz Karpisz and Anna Kiełbus

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818301017

• Abstract
• PDF (331.8 KB)
• References

Open Access

Tribological characteristics of Al/SiC/Gr hybrid composites 02001

Sandra Veličković, Slavica Miladinović, Blaža Stojanović, Ružica Nikolić, Branislav Hadzima, Dušan Arsić and Jozef Meško

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818302001

• Abstract
• PDF (299.9 KB)
• References

Open Access

The influence of simultaneous action of the aggressive environment and loading on strength of RC beams 02002

Jacek Selejdak, Roman Khmil and Zinoviy Blikharskyy

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818302002

• Abstract
• PDF (1.213 MB)
• References

Open Access

The computational analysis of the crack width of beams reinforced with CFRP and steel bars 02003

Kinga Brózda and Jacek Selejdak

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818302003

• Abstract
• PDF (309.5 KB)
• References

Open Access

Quasi-optimization of the slender geometrically nonlinear supporting system with non-prismatic element under the specific load 02004

Janusz Szmidla and Anna Jurczyńska

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818302004

• Abstract
• PDF (645.7 KB)
• References

Open Access

Possibilities of using 3D printing for surface layers 02005

Agnieszka Dulska

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818302005

• Abstract
• PDF (1018 KB)
• References

Open Access

Surface properties in S500MC steel with zinc coating 02006

Agata Dudek, Katarzyna Strzelczak and Barbara Lisiecka

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818302006

• Abstract
• PDF (971.4 KB)
• References

Open Access

Arrangement of the foundations under the new hotel in Lviv 02007

Andrii Kramarchuk, Borys Ilnytskyy and Oksana Lytvyniak

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818302007

• Abstract
• PDF (418.3 KB)
• References

Open Access

Experimental study of the strengthening effect of reinforced concrete columns jacketed under service load level 02008

Pavlo Krainskyi, Yaroslav Blikharskyy, Roman Khmil and Zinoviy Blikharskyy

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818302008

• Abstract
• PDF (604.4 KB)
• References

Open Access

Fracture toughness of RC beams on the shear, strengthening by FRCM system 02009

Zinoviy Blikharskyy, Pavlo Vegera, Rostyslav Vashkevych and Taras Shnal

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818302009

• Abstract
• PDF (696.1 KB)
• References

Open Access

The analysis of friction properties after laser texturizing of the silicon carbide surface layer 02010

Norbert Radek, Agnieszka Szczotok and Renata Dwornicka

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818302010

• Abstract
• PDF (954.4 KB)
• References

Open Access

The effect of the addition of polypropylene fibres on improvement on concrete quality 02011

Alina Pietrzak and Małgorzata Ulewicz

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818302011

• Abstract
• PDF (257.7 KB)
• References

Open Access

Outsorcing quality control in the automotive industry 03001

Robert Ulewicz

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818303001

• Abstract
• PDF (281.1 KB)
• References

Open Access

Control of incompatibilities in the production of helmets for mining 03002

Piotr Sygut

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818303002

• Abstract
• PDF (311.7 KB)
• References

Open Access

Quick Response Quality Control as an innovative approach in the conditions of rail transport 03003

Eva Nedeliaková, Vladimíra Štefancová and Adrián Kuka

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818303003

• Abstract
• PDF (272.2 KB)
• References

Open Access

Significance of the quality of short - link chains for work environment 03004

Katarzyna Midor

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818303004

• Abstract
• PDF (272.3 KB)
• References

Open Access

The analysis of non-conformances as the way of assessment of quality of aluminium finishing strips in the selected company 03005

Edyta Kardas

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818303005

• Abstract
• PDF (298.5 KB)
• References

Open Access

Using 5W-1H and 4M Methods to Analyse and Solve the Problem with the Visual Inspection Process - case study 03006

Krzysztof Knop and Krzysztof Mielczarek

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818303006

• Abstract
• PDF (331.0 KB)
• References

Open Access

Application of function of quality losses G. Taguchi for study of roller burnishing parameters 03007

Andrzej Pacana

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818303007

• Abstract
• PDF (267.3 KB)
• References

Open Access

Instruments of identification of hydraulic components potential failures 03008

Joanna Fabiś-Domagała, Grzegorz Filo, Hassan Momeni and Mariusz Domagała

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818303008

• Abstract
• PDF (265.0 KB)
• References

Open Access

The idea of fuzzy logic usage in a sheet-based FMEA analysis of mechanical systems 03009

Grzegorz Filo, Joanna Fabiś-Domagała, Mariusz Domagała, Edward Lisowski and Hassan Momeni

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818303009

• Abstract
• PDF (418.0 KB)
• References

Open Access

Improvement of quality by using an integrated management system of construction processes 03010

Andrzej Sobczyk, Janusz Pobędza and Małgorzata Sobczyk

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818303010

• Abstract
• PDF (316.7 KB)
• References

Open Access

Analysis of production incompatibilities and risk level in series production of assembly elements for the automotive industry 03011

Magdalena Mazur

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818303011

• Abstract
• PDF (236.1 KB)
• References

Open Access

Use of IT technologies in the management of production process quality 03012

Elżbieta Milewska and Bartłomiej Skowron

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818303012

• Abstract
• PDF (272.5 KB)
• References

Open Access

Quality improvement in Cleaner Production aspect 03013

Joanna Rosak-Szyrocka

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818303013

• Abstract
• PDF (293.3 KB)
• References

Open Access

Effect of the number of non-conforming samples on the Kappa indicator values 03014

Pavel Klaput and David Vykydal

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818303014

• Abstract
• PDF (354.1 KB)
• References

Open Access

Comparison of Approaches to Gauge Repeatability and Reproducibility Analysis 03015

Pavlína Mikulová and Jiří Plura

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818303015

• Abstract
• PDF (317.5 KB)
• References

Open Access

Improvement of the production system functioning with using quality management tools in the metallurgical enterprise 03016

Marta Daroń, Monika Górska and Anna Dunay

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818303016

• Abstract
• PDF (267.9 KB)
• References

Open Access

The 3x3 matrix as a tool for evaluation of technological position of the enterprise 04001

Manuela Ingaldi and Marina Zhuravskaya

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818304001

• Abstract
• PDF (276.2 KB)
• References

Open Access

Management of the subsystem of production logistics in an enterprise 04002

Marta Kadłubek and Agata Mesjasz-Lech

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818304002

• Abstract
• PDF (290.9 KB)
• References

Open Access

Selected aspects of technological innovations management in district heating companies 04003

Aleksandra Rak

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818304003

• Abstract
• PDF (522.9 KB)
• References

Open Access

Applications of linear programming to optimize the cost-benefit criterion in production processes 04004

Marek Krynke and Krzysztof Mielczarek

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818304004

• Abstract
• PDF (379.3 KB)
• References

Open Access

Sustainable Development in Accordance With the Concept of Industry 4.0 on the Example of the Furniture Industry 04005

Anna Wiśniewska-Sałek

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818304005

• Abstract
• PDF (276.0 KB)
• References

Open Access

Quality of project financed by the European Union structural funds 04006

Ewa Kozień

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818304006

• Abstract
• PDF (239.0 KB)
• References

Open Access

Development of human capital in the context of improving processes in the enterprise 04007

Rafal Prusak

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818304007

• Abstract
• PDF (271.2 KB)
• References

Open Access

Identifying key criteria in development of Industrial Engineering education 04008

Tomasz Nitkiewicz and Zuhal Ayen

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818304008

• Abstract
• PDF (223.9 KB)
• References

Open Access

Assessment of production processes functioning in the case of air bag production 04009

Krzysztof Mielczarek and Krzysztof Knop

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818304009

• Abstract
• PDF (392.7 KB)
• References

Open Access

Selected programme methods of practical teaching - smart grid course as a case study 04010

Robert Kucęba

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818304010

• Abstract
• PDF (269.7 KB)
• References

Open Access

Improved Education and Trainings in the Field of Fire Protection 04011

Roland Iosif Moraru and Mariusz Sroka

Published online: 31 July 2018

DOI: https://doi.org/10.1051/matecconf/201818304011

• Abstract
• PDF (252.9 KB)
• References