| Issue |
MATEC Web Conf.
Volume 184, 2018
Annual Session of Scientific Papers IMT ORADEA 2018
|
|
|---|---|---|
| Article Number | 01010 | |
| Number of page(s) | 4 | |
| Section | Mechanical Engineering and Automotive | |
| DOI | https://doi.org/10.1051/matecconf/201818401010 | |
| Published online | 31 July 2018 | |
Graphical-analytical analysis of the mechanism with rotating cam and flat-face follower
1
Stefan cel Mare University, Suceava, 13 University Str., 720229, Romania
2
Carol Davila University of Medicine and Pharmacy, Dpt. Clinic 2, 8 Bd. Eroii Sanitari, 050474, Bucharest, Romania
* Corresponding author : alaci@fim.usv.ro
The graphical-analytical methods are mentioned as being straightforward and expedite. The paper presents a graphical-analytical method for the kinematical analysis of a mechanism with rotating cam and oscillating flat-face follower. The manner supposes considering the contact point as a separate element of the mechanism and using concurrently the replacing mechanism with lower pairs and the actual mechanism, the relative motions from the contact point of the cam and contact point of the follower, respectively, are established. The methodology is exemplified for an actual case.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.