MATEC Web Conf.
Volume 184, 2018Annual Session of Scientific Papers IMT ORADEA 2018
|Number of page(s)||4|
|Section||Mechatronics and Robotics|
|Published online||31 July 2018|
Robust control system design for a brushed direct current motor using LabVIEW simulation loop
Masters Student, Debrecen University, Mechatronics Department, 4028 Debrecen, Hungary
2 Associate Professor, Debrecen University, Mechatronics Department, 4028 Debrecen, Hungary
* Corresponding author: firstname.lastname@example.org
This paper presents the design of a robust control system for a PMDC motor using LabVIEW software. At first, the mathematical equations of the motor were modelled and simulated. Then, a proportional integral controller (PI) was used as a speed controller, and to guarantee the robustness of the system against the disturbances, the PI parameters were tuned by applying a sensitivity analysis. Finally, a proportional gain (P) was used as a position controller to guide the system towards the desired angle. The simulation was performed using LabVIEW Simulation Loop, and the sensitivity analysis was carried using LabVIEW MathScript tool.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.