MATEC Web of Conferences

Open Access

Preface 00001

Dimitar Karaivanov

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928700001

• Abstract
• PDF (79.09 KB)

Open Access

Principal accomplishments in the scientific theory of gearing 01001

Stephen Radzevich

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928701001

• Abstract
• PDF (1.020 MB)
• References

Open Access

Innovations in design and production of spiroid gears in the XXI century 01002

Veniamin Goldfarb, Evgenii Trubachev and Natalya Barmina

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928701002

• Abstract
• PDF (811.2 KB)
• References

Open Access

Impact of backlash, manufacturing deviations and friction on the load sharing factor of planetary gear systems 01003

Athanassios Mihailidis, Anastasios Moisiadis and Andreas Psarros

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928701003

• Abstract
• PDF (1004 KB)
• References

Open Access

Study of the tooth contact for high contact ratio spur gears with long tip relief 01004

José I. Pedrero, Miguel Pleguezuelos and Miryam B. Sánchez

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928701004

• Abstract
• PDF (465.5 KB)
• References

Open Access

Numerical study concerning the influence of contact ratio at helical involute gears 01005

Sorin Gabroveanu, Sorin Cananau and Radu-Florin Mirica

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928701005

• Abstract
• PDF (514.2 KB)
• References

Open Access

Bidirectional modification of gears in the generalized theory of meshing 01006

Ognyan Alipiiev

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928701006

• Abstract
• PDF (1.899 MB)
• References

Open Access

Gear mesh geometry effect on performance improvement for external gear pumps 01007

Viktor Ivanov, Dimitar Karaivanov, Svitlana Ivanova and Mariia Volkova

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928701007

• Abstract
• PDF (519.5 KB)
• References

Open Access

Task based conceptual design of a testing machine 01008

Hrayr Darbinyan

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928701008

• Abstract
• PDF (620.5 KB)
• References

Open Access

Improvement of design parameters of planetary multipliers and reducers, using specialized author’s software for joined gears drives 01009

Peter Nenov, Bojidar Kaloyanov and Plamen Danev

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928701009

• Abstract
• PDF (912.4 KB)
• References

Open Access

Enhanced application limits for crossed helical gearboxes using new geometries for smaller sliding paths or smaller contact pressures 01010

Christoph Boehme, Dietmar Vill and Peter Tenberge

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928701010

• Abstract
• PDF (1.589 MB)
• References

Open Access

Fast tooth root load capacity optimization based on improved design of hob geometry 01011

Ray Uelpenich and Peter Tenberge

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928701011

• Abstract
• PDF (1.221 MB)
• References

Open Access

Modeling and optimization of the delivery fluctuation of gear pumps 01012

Efstratios Tsolakis, Antonios Tzanopoulos, Georgios Vasileiou, Nikolaos Rogkas, Vasilios Spitas and Pavlos Zalimidis

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928701012

• Abstract
• PDF (637.1 KB)
• References

Open Access

A heuristic method for transmission design 01013

Viktor Ivanov, Lubomir Dimitrov, Svitlana Ivanova and Galyna Naleva

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928701013

• Abstract
• PDF (566.0 KB)
• References

Open Access

Customizing planetary gear trains for human limb assistance and replication 01014

Pablo Lopez Garcia, Stein Crispel, Tom Verstraten, Elias Saerens, Bram Vanderborght and Dirk Lefeber

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928701014

• Abstract
• PDF (870.5 KB)
• References

Open Access

Interference of the profiles when meshing internal straight splines with gear shapers 01015

Svetlin Marinov, Ognyan Alipiev and Toni Uzunov

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928701015

• Abstract
• PDF (1.350 MB)
• References

Open Access

Optimal design of helical reducers for cement equipment 01016

Evgeniy Gudov and Sergey Lagutin

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928701016

• Abstract
• PDF (675.6 KB)
• References

Open Access

Design of a new-concept conical positive displacement slurry pump for continuous de-clogging 01017

G. Vasileiou, N. Rogkas, S. Tsolakis, V. Spitas and P. Zalimidis

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928701017

• Abstract
• PDF (765.6 KB)
• References

Open Access

Fast modelling and simulation of the dynamic behaviour of a wet multidisc clutch during the engagement phase 01018

Nikolaos Rogkas, Georgios Vasileiou, Efstratios Tsolakis, Vasileios Spitas and Pavlos Zalimidis

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928701018

• Abstract
• PDF (1.206 MB)
• References

Open Access

Multi-criteria optimization of tracked vehicle transmissions 01019

Oleksandr Ustynenko, Oleksiy Bondarenko, Illia Klochkov and Volodymyr Serykov

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928701019

• Abstract
• PDF (321.5 KB)
• References

Open Access

An algorithm for topology optimization of gear reducer housing elements 01020

Stoyan D. Slavov and Mariya Iv. Konsulova-Bakalova

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928701020

• Abstract
• PDF (1.020 MB)
• References

Open Access

Oscillation damping in the powertrain unit of transport vehicles 01021

Alexander Taratorkin, Viktor Derzhanskii and Igor Taratorkin

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928701021

• Abstract
• PDF (963.2 KB)
• References

Open Access

The Influence of the Bearing Lifetime on the Performance of Universal Gear Drives with High Gear Ratio Values 01022

Milan Rackov, Siniša Kuzmanović, Ivan Knežević, Maja Čavić, Marko Penčić, Darko Stefanović, Victor E. Starzhinsky, Sergey V. Shil’ko and Vladimir B. Algin

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928701022

• Abstract
• PDF (232.5 KB)
• References

Open Access

Progress in the development of the cutting assemblies’ construction of working machines due to the reduction in power consumption 01023

Andrzej Bochat and Marcin Zastempowski

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928701023

• Abstract
• PDF (477.5 KB)
• References

Open Access

Analysis of the cutting moments for the selected chopper’s cutting drums constructions 01024

Marcin Zastempowski and Andrzej Bochat

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928701024

• Abstract
• PDF (719.3 KB)
• References

Open Access

The simulation of the service life of the rotary shaft of a centrifugal pump 01025

Madina Isametova, Rollan Nussipali and Aysen Isametov

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928701025

• Abstract
• PDF (545.9 KB)
• References

Open Access

Study of spindle drives for boring machines 01026

Marin Zhilevski and Mikho Mikhov

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928701026

• Abstract
• PDF (470.1 KB)
• References

Open Access

The use of pneumatic cylinders with a return spring to compensate for balance losses in mechanical regenerative drives for reciprocating movements 01027

Wen Zhao and Victor Leonidovich Zhavner

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928701027

• Abstract
• PDF (629.6 KB)
• References

Open Access

The use of pneumatic cylinders with return springs when creating mechanical drives with recuperative energy 01028

Yan Chuanchao and Zhao Wen

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928701028

• Abstract
• PDF (512.1 KB)
• References

Open Access

“Top-down” design methodology utilizing abstraction of mechanical interfaces 01029

Peter Goranov, Desislava Georgieva and Elena Todorova

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928701029

• Abstract
• PDF (643.9 KB)
• References

Open Access

Increasing the load carrying capacity of highly loaded gears by nitriding 02001

Johannes Koenig, Stefanie Hoja, Thomas Tobie, Franz Hoffmann and Karsten Stahl

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928702001

• Abstract
• PDF (812.0 KB)
• References

Open Access

Stress-strain response in gears tooth root due to low cycle fatigue 02002

Marina Franulovic, Kristina Markovic and Zdravko Herceg

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928702002

• Abstract
• PDF (597.1 KB)
• References

Open Access

Durability Investigation of plastic gears 02003

Gorazd Hlebanja, Matija Hriberšek, Miha Erjavec and Simon Kulovec

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928702003

• Abstract
• PDF (1.131 MB)
• References

Open Access

Performance assurance of mechanical engineering construction in the existence of cracks 02004

Nikolay Velikanov, Sergey Koryagin and Oleg Sharkov

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928702004

• Abstract
• PDF (382.9 KB)
• References

Open Access

Numerical simulation of elastoplastic contact of heavy-loaded spiroid gears 02005

Alexander Sannikov

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928702005

• Abstract
• PDF (802.9 KB)
• References

Open Access

Investigation of the opportunities for experimental research of gear trains vibrations 03001

Svetlin Stoyanov, Vasko Dobrev and Antoaneta Dobreva

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928703001

• Abstract
• PDF (312.6 KB)
• References

Open Access

About waveguide modeling (transmissions of ultrasonic technological machines) 03002

Vitaly Krupenin and Vladimir Astashev

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928703002

• Abstract
• PDF (312.1 KB)
• References

Open Access

Modeling of vibration transmission through impact elements 03003

Vitaly Krupenin

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928703003

• Abstract
• PDF (339.5 KB)
• References

Open Access

Optimization of transport vehicle transmission vibroacoustic characteristics 03004

Alexander Taratorkin, Victor Derzhanskii and Igor Taratorkin

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928703004

• Abstract
• PDF (600.8 KB)
• References

Open Access

Vibration analysis of multi-body dynamic model of combat vehicle gearbox 03005

Jan Furch and Cao Vu Tran

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928703005

• Abstract
• PDF (490.8 KB)
• References

Open Access

Modelling and researching of forced spatial vibrations of axial fans 03006

Valentin Slavov and Georgi Vukov

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928703006

• Abstract
• PDF (448.2 KB)
• References

Open Access

Transmission of lateral vibrations to children during car traveling and possibilities for their reduction 03007

Nikolay Pavlov, Evgeni Sokolov, Emil Iontchev, Rossen Miletiev and Mihail Peychev

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928703007

• Abstract
• PDF (603.6 KB)
• References

Open Access

Work of the planetary gear trains as differentials and their capabilities 04001

Kiril Arnaudov, Stefan Petrov and Emiliyan Hristov

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928704001

• Abstract
• PDF (572.2 KB)
• References

Open Access

Statistical analysis of locomotives traction motors performance 04002

Oleksander Gorobchenko and Victor Tkachenko

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928704002

• Abstract
• PDF (500.7 KB)
• References

Open Access

Hyperboloid gear transmissions: innovations, experimental and manufacture realization 04003

Valentin Abadjiev and Emilia Abadjieva

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928704003

• Abstract
• PDF (925.5 KB)
• References

Open Access

Justification of the parameters of a pneumatic conveyor for active ventilation of soybean during storage 04004

Sholpan Duisenova, Aibek Atykhanov and Dimitar Karaivanov

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928704004

• Abstract
• PDF (437.8 KB)
• References

Open Access

Influence of remetalizer "Rimet" on treatment of the bearing alloy 05001

Georgi Komitov

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928705001

• Abstract
• PDF (358.1 KB)
• References

Open Access

Comparative research of diesel engine at working with anamegators 05002

Georgi Komitov and D. Kehayov

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928705002

• Abstract
• PDF (424.6 KB)
• References

Open Access

Tribological researches of triboelements topography of hob milling process of cylindrical gear serration 05003

Bogdan Sovilj, Sandra Sovilj-Nikic and Juliana Javorova

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928705003

• Abstract
• PDF (1.238 MB)
• References

Open Access

Automation of fuzzy multi-criteria selection of robotic machine-assembly technologies using worst-case approach 06001

Valery Kyrylovych, Lubomir Dimitrov, Ilona Kryzhanivska and Petro Melnychuk

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928706001

• Abstract
• PDF (817.4 KB)
• References

Open Access

Microstructure evolution of the Gleeble-simulated heat-affected zone of Ni-based superalloy 06002

Łukasz Rakoczy, Fabian Hanning, Joel Andersson, Małgorzata Grudzień-Rakoczy, Rafał Cygan and Anna Zielińska-Lipiec

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928706002

• Abstract
• PDF (704.9 KB)
• References

Open Access

Defining parameters for control of extruding wire by friction process 06003

Nuray Hasan and Deyan Gradinarov

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928706003

• Abstract
• PDF (295.9 KB)
• References

Open Access

Effect of applied chemical heat treatment on the structure and properties of low-alloy Cr-containing iron powders 06004

Desislava Mincheva and Plamen Petrov

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928706004

• Abstract
• PDF (954.6 KB)
• References

Open Access

Application of powder filter materials in run-in of engines 06005

Aliaksandar Ilyushchanka, Vyacheslav Kaptsevich, Valeria Korneeva, Ruslan Kusin, Igar Zakreuski, Iryna Charniak and Alexey Kusin

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928706005

• Abstract
• PDF (515.1 KB)
• References

Open Access

A study on prediction & validation of meshing gear pair backlash under various manufacturing and assembly errors 07001

Bahadır Karba, Nihat Yıldırım, Fatih Erdoğan and Mert Vardar

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928707001

• Abstract
• PDF (971.7 KB)
• References

Open Access

Research of working capacity of pulsed variable-speed drives 07002

Oleg Sharkov, Sergey Koryagin and Nikolay Velikanov

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928707002

• Abstract
• PDF (518.1 KB)
• References

Open Access

Instrumental methods in the diagnostics of special vehicle drive 07003

Jiri Stodola and Zdenek Krobot

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928707003

• Abstract
• PDF (567.4 KB)
• References

Open Access

Methods for preparation of corroded steel specimens for mechanical testing 07004

Nikolay Nikolov, Yordanka Marcheva and Veselin Tsonev

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928707004

• Abstract
• PDF (2.587 MB)
• References

Open Access

Experimental studies of the structure of biological tissues through mechanical effects with a smart laparoscopic instrument 07005

Veronika Ivanova, Ditchko Batchvarov, Zlatoliliya Ilcheva, Ani Boneva, Svetozar Ilchev, Alexander Alexandrov and Rumen Andreev

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928707005

• Abstract
• PDF (477.3 KB)
• References

Open Access

Whole outline scanning measurement of internal gear by using CNC gear measuring machine 08001

Syuhei Kurokawa, Yuuki Utsunomiya, Terutake Hayashi, Tetsuya Taguchi and Ryota Matsuoka

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928708001

• Abstract
• PDF (580.8 KB)
• References

Open Access

Examination of a repetitive process control system 08002

Nina G. Nikolova

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928708002

• Abstract
• PDF (843.0 KB)
• References

Open Access

A topology of grid connected photovoltaic inverter with variable power factor 08003

Andrey Mirev, Yovko Rakanov, Juliana Javorova and Anton Andonov

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928708003

• Abstract
• PDF (474.3 KB)
• References