MATEC Web Conf.
Volume 287, 20196th International BAPT Conference “Power Transmissions 2019”
|Number of page(s)||5|
|Section||Other Relevant Subjects|
|Published online||14 August 2019|
Whole outline scanning measurement of internal gear by using CNC gear measuring machine
Kyushu University, Department of Mechanical Engineering, 819-0395 Fukuoka, Japan
2 Osaka Seimitsu Kikai Co., Ltd., Manufacturing Division, 577-0032 Higashi-Osaka, Japan
* Corresponding author: firstname.lastname@example.org
A three-dimensional probe is mounted on a specialized gear measuring machine whose measurement target is limited on the working flanks. The newly developed measuring machine has a coordinate measuring mechanism, aiming to be a highly versatile and relatively inexpensive measuring machine. According to our previous research, in addition to the working tooth surface, shape data of the root, bottom and tip profiles can be acquired with a single measurement operation. However, the target object for which this developed method has been applied was only the external cylindrical gear. In this paper, we applied and expanded the development method to the internal cylindrical gear and the evaluation of the axial displacement in the same cross-sectional scanning of the internal helical gear are performed.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.