EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 287 (2019) MATEC Web Conf., 287 (2019) 01021 References
Open Access
Issue
MATEC Web Conf.
Volume 287, 2019
6th International BAPT Conference “Power Transmissions 2019”
Article Number 01021
Number of page(s) 6
Section Design, Analysis, Simulation and Optimization
DOI https://doi.org/10.1051/matecconf/201928701021
Published online 14 August 2019
  1. F. De Lillo, F. Cecconi, G. Lacorata, A. Vulpiani, EPL, 84 (2008) Reik, W.; Albers, A.; Schnurr, M. u.a. Torque Control Isolation (TCI) The Smart Clutch. LuK-Symposium 1990. [Google Scholar]
  2. A. Albers, Das Zweimasseznschwungrad der dritten Generation-Optimierung der Komforteigenschaften von PKW-Antriebssträngen. Antriebstechnisches Kolloquium 91, Verlag TÜV-Rheinland, 1991. [Google Scholar]
  3. A. Taratorkin Dynamic Loading Reduction of Multiplate Clutches Lined Plates of the Vehicle Powertrain. SAE Technical Papers. SAE, 2014. No.2014-01-2332, pp. 1-5. [Google Scholar]
  4. A.I. Taratorkin, [Reducing the Dynamic Load of Friction Clutches of Hydro Mechanical Transmissions of Transport Vehicles]. Trudy NAMI: sb. Nauch. St. Proceedings of NAMI: Sat. sci. art. Moscow: Nauka, 2015, Vol. 260, pp. 178-189. (in Russ.) [Google Scholar]
  5. A. Albers, Simultaneous Engineering an einem Beispiel aus der KFZ-Zulieferindustrie. Führungskräfte-Treffen 93 des VDI-EKV Verein deutscher Ingerieure, Düsseldorf 1993. [Google Scholar]
  6. A. Fidlin, R. Seebacher. DMF Simulati on Techniques. 8th LuK Symposium, 2006 [Google Scholar]
  7. W. Reik, A. Fidlin, R. Seebacher Good Vibrations-Bad Vibrations. VDI Conference Vibrations in Drives, 2009 [Google Scholar]
  8. A. Kooy, A.Gillmann, J.bJäckel, M. Bosse, DMF-Nothing New. 7th LuK Symposium, 2002 [Google Scholar]
  9. J. Kroll, A. Kooy, R. Seebacher Torsion sschwingungsdempfung fur zukunftige Motoren. Schaeffler Kolloqu. Schaeffler Technologies, Herzogenaurach 2010. [Google Scholar]
  10. J. Freitag, M. Haessler, S. Lehmann, C. Raber, M. Schneider, C. Wittmann. The Clutch Comfort Portfolio: From a supplier's product to an equipment criterion. 10th Schaeffler Symposium, 2014. [Google Scholar]
  11. G.S. Beloutov [Mathematical Model for Calculating the Dynamic Loads in the Input Transmission Elements During the Passage of the Resonance Zone at Engine Starting]. Aktualnye problem zashchity I bezopasnosti: Trudy XVII Vserossijskoj nauchno prakticheskoj konferencii RARAN (1-4 aprelya 2014 g.). [Edition FBGU "Russian Academy of Missile and Artillery Sciences, Moscow], 2014, pp. 142-149. (in Russ.) [Google Scholar]
  12. V.P. Terskikh [Torsional Oscillations of the Power Shaft of the Power Plants]. Leningrad: Shipbuilding, 1970. (in Russ.) [Google Scholar]
  13. S.E. Burtsev [Calculation of Dangerous Modes of Forced Oscillations of Torsional Caterpillar Systems]. Moscow, Publ. House of the Military Academy of Armored Forces, 1967. (in Russ.) [Google Scholar]
  14. V.L. Veits, A.E. Kochura [The Dynamics of Machine Units with Internal Combustion Engines]. Leningrad, Mechanical Engineering, 1976. (in Russ.) [Google Scholar]
  15. A.I. Grishkevich [Design of Transmissions of the Car]. Moscow, Mechanical Engineering, 1983. p. 263. (in Russ.) [Google Scholar]
  16. V.B. Algin [Dynamics of Multimass Systems of Machines with Changing States of Friction Components and Directions of Power Flows]. Mechanics of machines, mechanisms and materials. 2014. no. 4 (29). pp. 21-32. (in Russ.) [Google Scholar]
  17. L. Richard [Digital Signal Processing]. Translation from English. Leningrad, [Richard. 2-nd edition], Moscow, OOO «Binom-Press» Publ., 2007. (in Russ.) [Google Scholar]
  18. PowerGraph [User Guide], URL: http://www.powergraph.ru (in Russ.) [Google Scholar]
  19. D.Yu. Izmailov D.Yu. [PowerGraph. Part 2-Carrying out measurements of PiCAD]. Moscow: Publ. MGU, 2008, No. 2, pp. 42-46. (in Russ.) [Google Scholar]
  20. [Control systems for diesel engines]. Translation from German. C40. [The first Russian edition].-Moscow, JSC «BPH» Driving», 2004.-480 p. (in Russ.) [Google Scholar]
  21. LMS Imagine.Lab Model-oriented approach to designing mechatronic systems. URL: https://www.plm.automation.siemens.com/ru_ru/products/lms/imagine-lab/amesim [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.