Effect of applied chemical heat treatment on the structure and properties of low-alloy Cr-containing iron powders

Desislava Mincheva; Plamen Petrov

doi:10.1051/matecconf/201928706004

All issues

Volume 287 (2019)

MATEC Web Conf., 287 (2019) 06004

References

Open Access

Issue		MATEC Web Conf. Volume 287, 2019 6^th International BAPT Conference “Power Transmissions 2019”


Article Number		06004
Number of page(s)		5
Section		Materials and Technological Processes
DOI		https://doi.org/10.1051/matecconf/201928706004
Published online		14 August 2019

http://www.pometon.com/dettaglioNews_eng.php/id_news=23 [Google Scholar]
https://www.pm-review.com/ecosint-the-new-high-performance-steel-powder/ [Google Scholar]
S. Bueno, S. Saccarola, A. Karuppannagonder, EUROPM2011, Spain (2011) [Google Scholar]
S. Saccarola, S. Sainz. Adv. In Powder Met & Part Mater 10, 52 (2009) [Google Scholar]
R.M. German, Powder metallurgy science: Second edition, (Princeton, New Jersy, USA, 1994) [Google Scholar]
D. Mincheva, P. Petrov, Annual Journal of TU, Varna, 1, (2018) [Google Scholar]
S. Charizanova, G. Dimitrov, E. Rousseva, V. Marcov, Journal of Materials Processing Technology 77 (1998) [CrossRef] [Google Scholar]
R. Rusev, S. Harizanova, E. Ruseva, Hardening of PM materials on the basis of Fe by chemical heat treatment technologies, Proc. of Deformation and Fracture in structural PM materials, International PM conference, Stara Lesna, 2. (2002) [Google Scholar]
S. Harizanova, I. Ivanov, Nitrocarburation of ferrocarbonic porous alloys, steel alloyed with Cu and Mn, International Scientific Journal of Acta Universitastis Pontica, Euxinus, 1, (2002) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

[1] http://www.pometon.com/dettaglioNews_eng.php/id_news=23 [Google Scholar]

[2] https://www.pm-review.com/ecosint-the-new-high-performance-steel-powder/ [Google Scholar]

[3] S. Bueno, S. Saccarola, A. Karuppannagonder, EUROPM2011, Spain (2011) [Google Scholar]

[4] S. Saccarola, S. Sainz. Adv. In Powder Met & Part Mater 10, 52 (2009) [Google Scholar]

[5] R.M. German, Powder metallurgy science: Second edition, (Princeton, New Jersy, USA, 1994) [Google Scholar]

[6] D. Mincheva, P. Petrov, Annual Journal of TU, Varna, 1, (2018) [Google Scholar]

[7] S. Charizanova, G. Dimitrov, E. Rousseva, V. Marcov, Journal of Materials Processing Technology 77 (1998) [CrossRef] [Google Scholar]

[8] R. Rusev, S. Harizanova, E. Ruseva, Hardening of PM materials on the basis of Fe by chemical heat treatment technologies, Proc. of Deformation and Fracture in structural PM materials, International PM conference, Stara Lesna, 2. (2002) [Google Scholar]

[9] S. Harizanova, I. Ivanov, Nitrocarburation of ferrocarbonic porous alloys, steel alloyed with Cu and Mn, International Scientific Journal of Acta Universitastis Pontica, Euxinus, 1, (2002) [Google Scholar]