EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 287 (2019) MATEC Web Conf., 287 (2019) 05003 References
Open Access
Issue
MATEC Web Conf.
Volume 287, 2019
6th International BAPT Conference “Power Transmissions 2019”
Article Number 05003
Number of page(s) 13
Section Tribology, Lubrication
DOI https://doi.org/10.1051/matecconf/201928705003
Published online 14 August 2019
  1. M. Cohodar Husic, D. Begic-Hajdarevic, A. Cekic, Modern machining systems and industrial robots, FME, Sarajevo, (2014). (in Serbian) [Google Scholar]
  2. B. Sovilj, S. Sovilj-Nikic, G. Varga, N. Ungureanu, V. Blanusa, Analysis of the possibility of improving the characteristics of hob milling tools for gear cutting of cylindrical gears, Machine Design, 10, 2, 63-68, (2018). [Google Scholar]
  3. S. Sovilj-Nikic, B. Sovilj, D. Jesic, V. Blanusa, V. Tonkonngyy, L. Bovnegra, Development of the method of direct temperature measurement for gear cutting of cylindrical gears by hob milling, MATEC Web of Conf, 184, 03010, (2018). [CrossRef] [Google Scholar]
  4. I. Sovilj-Nikic, Modeling and optimization of hob milling process, PhD thesis, Faculty of Technical Science, Novi Sad. (unpublished) (in Serbian) [Google Scholar]
  5. B. Sovilj, B., V. Dokic, M. Zlokolica, I. Sovilj-Nikic, Topography of the surface layer of the tooth flank in gears produced by uncoated and coated hob milling tools, Tribology in Industry, 22, 3&4, 57-60, (2000). [Google Scholar]
  6. S. Tanasijevic, Tribologically correct design, FME, Kragujevac, (2004). (in Serbian) [Google Scholar]
  7. I. Sovilj-Nikic, S. Sovilj-Nikic, B. Sovilj, R. Dokic, Analysis of roughness parameters of the tooth-face of model hob milling tool, Machine Design, 9, 3, 99-106, (2017). [Google Scholar]
  8. K. Bouzakis, E. Lili, N. Michalidis, O. Friderikos, Manufacturing of cylindrical gears by generating cutting processes: A critical synthesis of analysis methods, CIRP Annals-Manufacturing Technology, 57, 676-696, (2008). [CrossRef] [Google Scholar]
  9. K. Bouzakis, G. Skoridatis, N. Michalidis, Innovative methods for characterizing coatings mechanical properties, Proc Intern Conf 'The Coatings 2008', Kallithea, Greece, (2008). [Google Scholar]
  10. B. Sovilj, Identification of tribological processes in welding, PhD thesis, Faculty of Technical Science, Novi Sad, (1988). (in Serbian) [Google Scholar]
  11. A. Antoniadis, N. Vidakis, N. Bilalis, Fatigue fracture investigation of cemented carbide tools in gear hobbing, Journal of Manufacturing Science and Engineering, 124, 4, 784-791, (2002). [CrossRef] [Google Scholar]
  12. B. Sovilj, S. Radonjic, J. Javorova, I. Sovilj-Nikic, Design of profiled cutting tools by applying programming systems, Machine Design, 2, 1, 229-234, (2010). [Google Scholar]
  13. B. Sovilj, J. Javorova, P. Kovac, I. Sovilj-Nikic, Wear of coated profiled tools in production conditions, Proc. 26th Int Sci Conf '65 years Faculty of Machine Technology', Sozopol, 515-520, (2010). [Google Scholar]
  14. I. Sovilj-Nikic, B. Sovilj, M. Kandeva, V. Gajic, S. Sovilj-Nikic, S. Legutko., P. Kovac, Tribological characteristics of hob milling tools from economic aspect, J Balk Tribol Assoc, 18, 4, 577-585, (2012). [Google Scholar]
  15. I. Sovilj-Nikic, B. Sovilj, M. Brezocnik, Application of genetic algorithm in analysis of influence of gear hob geometric parameters on the tool life, Proc Intern Conf 'ICMEN 2008', Kallithea, Greece, 2008. [Google Scholar]
  16. M. Stupnisek, B. Matijevic, Overview of procedures for modifying and coating of metal, Proc Intern Sci Conf 'Thermal treatment of metal and surface engineering', Zagreb, 53-62, (2000). (in Croatian) [Google Scholar]
  17. M. Kandeva-Ivanova, A. Vencl, D. Karastoyanov, Advanced tribological coatings for heavy-duty applications: Case studies, Publ. House of BAS, Sofia, (2016). [Google Scholar]
  18. M. Kandeva, B. Ivanova, V. Pozhidaeva, D. Karastoyanov, J. Javorova, Composite coatings to improve durability of the working body of the drill, Proc. 5th World Tribology Congress WTC 2013, Torino, Italy, 3, Paper 1251, 2729-2732, (2013). [Google Scholar]
  19. S. Dishliev, G. Mishev, V. Rupetsov, L. Kolaklieva, C. Pashinski, R. Minchev, Study of the properties of multilayered gradient TiAlSiN nanocomposite coating deposited on 1.2343 steel, Bulgarian Chemical Communications, 48, E, 373-377, (2016). [Google Scholar]
  20. V. Rupetsov, G. Mishev, S. Dishliev, V. Kopanov, V. Chitanov, L. Kolaklieva, C. Pashinski, Increasing in the wear resistance of injection molds made of 1.2343 steel using Ti/ TiN/TiCN/nc-TiCN:a-C/nc-TiC:a-C/a-C nanocomposite coating, IOP Conf. Ser. Mater. Sci. Eng., 174, 012064, (2017). [CrossRef] [Google Scholar]
  21. M. Kandeva, T. Grozdanova, D. Karastoyanov, E. Assenova, Wear resistance of WC/Co HVOF-coatings and galvanic Cr coatings modified by diamond nanoparticles, IOP Conf. Ser. Mater. Sci. Eng., 174, 012060, (2017). [CrossRef] [Google Scholar]
  22. S. Sovilj-Nikic, B. Sovilj, G. Varga, N. Ungureanu, V. Blanusa, Analysis of the tool life of coated hob milling tools for gear cutting of cylindrical gears, MATEC Web of Conf, 184, 03011, (2018). [CrossRef] [Google Scholar]
  23. I. Sovilj-Nikic, S. Sovilj-Nikic, B. Sovilj, I. Samardzic, D. Kozak, V. Blanusa, Analysis of roughness parameters of lateral back surfaces of model hob milling tools during cylindrical gear cutting, Applied Engineering Letters, 3, 2, 63-71, (2018). [CrossRef] [Google Scholar]
  24. Z. Humieny (ed.), Geometrical Product Specifica-tion, Chapter 16: Roughness, Waviness and Primary Profile by L. Blunt, X. Jiang, WUT Printing House, Warsaw, (2001). [Google Scholar]
  25. J. Jozwik, K. Dziedzic, I. Usydus, P. Raos, HS 6-5-2 steel surface layer development in carboniteriding with zeroflow method, Technical Gazette, 23, 6, 1405-1409, (2016). [Google Scholar]
  26. B. Krizan, Fundamentals of calculation and design of structural elements, Textbook, Zagreb, (2008). (in Croatian) [Google Scholar]
  27. I. Sovilj-Nikic, S. Sovilj-Nikic, B. Sovilj, V. Blanusa, Topography of characteristic surfaces of model hob milling tools for machining of gear serration, Proc 8th Intern Sci Conf IRMES 2017, Trebinje, 241-246, (2017). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.