Free Access to the whole issue

MATEC Web of Conferences

Volume 286 (2019)

14^th Congress of Mechanics (CMM2019)

Rabat, Morocco, April 16-19, 2019
S. Aniss (Ed.)

Export the citation of the selected articles Export
Select all

Open Access

Statement of Peer review

Published online: 14 August 2019

PDF (413 KB)

Dynamics, Vibrations and Acoustics

Open Access

Vibrations piezo-control of FGM beam in a thermal environment 01001

K. El Harti, MED. Rahmoune, M. Sanbi, R. Saadani, M. Bentaleb and M. Rahmoune

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928601001

Open Access

Vibration suppression for high speed railway bridges using fluid viscous dampers 01002

M. Tahiri, A. Khamlichi and M. Bezzazi

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928601002

Open Access

Nonlinear multimodal electromagnetic device for vibration energy harvesting 01003

K. Aouali, Z. Zergoune, N. Kacem, E. Mrabet, N. Bouhaddi and M. Haddar

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928601003

Open Access

Three-dimensional modeling of the static behavior of magneto-electro-elastic multilayer plates based on an elastic support 01004

M. Hamidi, S. Zaki and M. Aboussaleh

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928601004

Open Access

Vibration with non-linear damping. stochastic approach 01005

M. Lamrhari

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928601005

Open Access

Dynamic analysis of beams on fractional viscoelastic foundation subject to a variable speed moving load 01006

A. Ouzizi, F. Abdoun and L. Azrar

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928601006

Open Access

The experimental validation of a numerical model for the receptance prediction 01007

A. Zougari and J. MartÍnez

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928601007

Open Access

Flutter and parametric stability analysis of axially moving composite graphene sheets 01008

A. Azrar, N. Fakri, A.A. Aljinaidi and L. Azrar

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928601008

Solid and Structural Mechanics Modelling

Open Access

Elastic-Plastic Stresses in Shrink Fit with A Solid Shaft 02001

Amal Mouâa, Nor Eddine Laghzale and Abdel-Hakim Bouzid

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928602001

Open Access

Probabilistic methodology for reliability assessment of electronic packages 02002

H. Hamdani, B. Radi and A. El Hami

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928602002

Open Access

Development of a innovative solution for energy recovery from the flow exhaust gas on bench test facility of turbofan aircraft engine through the use of innovative design methods: Definition of the process and the operating environment 02003

Amine Rahoui and Zinab Aalaoui

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928602003

Open Access

Concentrated stress location areas for welded tubular T-joints under deflected bending load 02004

E. Chouha, S.E. Jalal, Z. El Maskaoui and A. Chouaf

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928602004

Open Access

Meshfree method for large deformation in dynamic problems 02005

H. Karim Serroukh and M. Mabssout

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928602005

Open Access

Analytical Modelling of Elastic Interference Fit Joints for Functionally Graded Materials 02006

M. Belhaou and N. Laghzale

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928602006

Open Access

A review and application of the failure criteria on a graphite epoxy under three-point bending test 02007

Y. Benbouras, M. Bellahkim, A. Maziri, E. Mallil and J. Echaabi

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928602007

Open Access

Numerical study of the effect of concrete cover and the friction of steel concrete interface 02008

Z. Zenasni, S. Atlati, M. Haterbouch, K. Hannawi, W.P. Agbodgan, K. Nasri, R. Addou and M. Zenasni

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928602008

Open Access

Modeling and simulation of an underactuated system 02009

K. Nader and D. Sarsri

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928602009

Solid and Composite Materials

Open Access

The possibility of using a smartphone in a single plane rotor balancing 03001

A. Ait Ben Ahmed, A. Touache, A. El Hakimi and A. Chamat

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928603001

Open Access

Non-Linear Forced Vibration of Fully Clamped FGM Skew Plates using Homogenization Technique 03002

H. Moulay Abdelali and R. Benamar

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928603002

Open Access

The effects of the temperature on the mechanical properties of natural yarns 03003

Y. Ben Smail, A. El Moumen, F. Lmai and A. Imad

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928603003

Open Access

Optimization of elasticity of unidirectionnal non-overlapping fiber reinforced materials 03004

L. Lakhal, Y. Brunet and T. Kanit

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928603004

Open Access

Numerical simulation of investment casting process of nickel-based alloy. 03005

O. Ben Lenda, A. Tara, O. Jbara and E. Saad

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928603005

Open Access

Study of the mechanical behavior of light mortars produced by thermal treatment, with coal waste of Jerada mine (eastern Morocco) 03006

R. Addou, K. Hannawi Salmo, Z. Zenasni, W. P. Agbodjan and M. Zenasni

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928603006

Open Access

Vibration of composite thin-walled beams with variable open cross section by a high order implicit algorithm 03007

A. El Kaimbillah, O. Bourihane, M. Jamal, B. Braikat, F. Mohri and N. Damil

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928603007

Integrated Design and Production, Manufacturing Processes

Open Access

The optimization of a hydroformed tube 04001

Nassraoui Mohammed and Radi Bouchaib

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928604001

Open Access

Thermal-Electrical-Mechanical Simulation of High Pressure Spark Plasma Sintering (HP-SPS) Process 04002

Youssef Achenani, Abdelkhalek Cheddadi, Malika SaÂdaoui and Gilbert Fantozzi

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928604002

Open Access

A three dimensional meshfree-simulation of the selective laser sintering process with constant thermal coefficients applied to nylon 12 powders 04003

H. Yaagoubi and H. Abouchadi

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928604003

Fracture and Fatigue of Materials

Open Access

Analytical estimation of the reliability of wire rope based on cumulative damage 05001

Achraf. Wahid, Nadia. Mouhib, Fatima. Sabah, Hamid. Chakir and M.EL Ghorba

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928605001

Open Access

Consideration of the reconfigurable aspect in evaluating predictive reliability of mechatronic system 05002

Nabil B. Amrani, Driss Sarsri, Mihaela Barreau and Laurent Saintis

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928605002

Porous Media and Granular Media

Open Access

Simultaneous estimation of hydro-dipersive parameters using a new modified levenberg-marquardt algorithm 06001

H. Qanza, A. Maslouhi, M. Hachimi and A. Hmimou

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928606001

Open Access

Investigational methods for the modeling of infiltration process in the soil and the estimating the soil hydrodynamic parameters 06002

M. Hachimi, A. Maslouhi, K. Tamoh and H. Qanza

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928606002

Open Access

Two unbound granular materials stiffness analysis with staged repeated load CBR test 06003

Abdelaziz Salmi, Lahbib Bousshine and Khaled Lahlou

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928606003

Fluid Mechanics, Rheology, Modeling, Instabilities and Transition

Open Access

Numerical modeling transient flow in plastic pipes 07001

N. Achak, B. Bahrar and K. Gueraoui

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928607001

Open Access

Magnetohydrodynamic effects on finite and infinite slider bearings 07002

M. Mouda, M. Nabhani and M. El Khlifi

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928607002

Open Access

A mesh-free approach for the simulation of incompressible flows 07003

M. Rammane, S. Mesmoudi, A. Tri, B. Braikat and N. Damil

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928607003

Open Access

Semi analytical method for calculating Dean's vortex in Torus of elliptical cross section 07004

S. Ajgoun, J. Khalid Naciri and R. Khatyr

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928607004

Open Access

Importance of rheology in the prediction of structural transition phenomena in geopolymer matrices loaded with phosphogypsum 07005

N. Lahlou, M. Ouazzani Touhami, R. Hattaf and R. Moussa

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928607005

Open Access

Reducing drag on a flat plate subjected to incompressible laminar flow 07006

A. Agriss, M. Agouzoul and A. Ettaouil

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928607006

Open Access

Thermal convection instability of two miscible viscous fluids in a Hele-Shaw cell 07007

M. Echchadli

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928607007

Open Access

Transient energy growth of channel flow with cross-flow 07008

J. Benyza, M. Lamine and A. Hifdi

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928607008

Open Access

Dominant modes in hydromagnetic stability of channel flow with porous walls 07009

M. Lamine and A. Hifdi

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928607009

Open Access

Instability of a viscous interface under horizontal quasi-periodic oscillation 07010

M. Assoul, A. El Jaouahiry, M. Echchadli and S. Aniss

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928607010

Open Access

Interfacial instability of two inviscid fluid layers under quasi-periodic oscillations 07011

A. Eljaouahiry, A. Arfaoui, M. Assoul and S. Aniss

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928607011

Open Access

Impact of model resolution on numerical weather prediction 07012

Z. Sahlaoui and S. Mordane

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928607012

Open Access

Data assimilation for control of a plane mixing layer 07013

N. Kumar, F. Kerhervé and L. Cordier

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928607013

Open Access

Control of the Interfacial Instabilities in a circular Hele-Shaw cell oscillating with a periodic angular velocity 07014

J. Bouchgl and M. Souhar

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928607014

Open Access

Separation stability in binary mixtures with negative Soret numbers 07015

B. Šeta, E. Lapeira, D. Dubert, F. Gavalda, M.M. Bou-Ali and X. Ruiz

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928607015

Open Access

Transport mechanisms inside the turbulent wake of a bluff body 07016

Eliott Varon, Nicolas Mazellier and Azeddine Kourta

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928607016

Open Access

Numerical study of an impeller design for a new ventricular assist device 07017

M. Bounouib, M.Z. Es-Sadek, M. Taha-Janan and W. Maazouzi

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928607017

Open Access

Simulation of compressible and incompressible flows in the presence of shocks 07018

H. Benakrach, M. Taha-Janan and M.Z. Es-Sadek

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928607018

Heat Transfers, Mass Transfers, Renewable Energies and Environment

Open Access

Permeation of Toluene into (Polypropylene/Acrylonitrile-co-butadiene Rubber) immiscible blend 08001

Y. Hairch and A. El Afif

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928608001

Open Access

Heat transfer enhancement using two isothermal blocks in a cylindrical heat exchanger 08002

S. Touzani, A. Cheddadi and M. T. Ouazzani

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928608002

Open Access

Thermal transfer of Nanofluids based on carbon nanotubes/glycerol and study of their rheological behavior 08003

S. Lahlou, R. Sehaqui and N. Lahlou

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928608003

Open Access

Numerical simulation of coupeld heat transfer through a concrete hollow brick 08004

B. Jamal, M. Boukendil, A. Abdelbaki and Z. Zrikem

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928608004

Open Access

Direct carbon fuel cell simulation using hybrid lb-fv approach: effect of carbon fuel specific surface area 08005

A. El Mansouri, M. Hasnaoui, I. Filahi, A. Amahmid, M. Alouah and Y. Dahani

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928608005

Open Access

Synthesis study on thermal insulation improvement in construction materials 08006

A. Lachheb, M.R. Kabiri and R. Saadani

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928608006

Open Access

Novel Cascade Solar Desalination Still: Mathematical, Numerical and Experimental Analysis 08007

M. Bouzaid, N. Mouhsin, M. Taha-Janan, M. Oubrek and O. Ansari

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928608007

Open Access

Computational parametric study of latent melting heat storage 08008

Hamza Faraji, Mustapha Faraji and Mustapha El Alami

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928608008

Open Access

Numerical Study Of Thermal Behavior Of Anisotropic Medium In Bidirectional Cylindrical Geometry 08009

Rabiâ Idmoussa, Nisrine Hanchi, Hamza Hamza, Jawad Lahjomri and Abdelaziz Oubarra

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928608009

Open Access

Jeffery-Hamel slip flow in a convergent microchannel with uniform wall temperature and streamwise heat conduction 08010

Mohammed Niagui, Youssef Haddout, Abdelaziz Oubarra and Jawad Lahjomri

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928608010

Open Access

Ground measurements of dcmix 4 project Fullerene based nanofluid 08011

M. Mounir Bou-Ali, A. Errarte, A. Mialdun, V. Shevtsova, M. Schraml and W. KÖhler

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928608011

Fluid-Structure Interaction

Open Access

Use of the corrected plane wave model for the determination of the reflection coefficient during horizontal plate swell interaction 09001

M. Amimi, S. Naasse and C. Chahine

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928609001

Open Access

Parameters variation effects on energy recovery for a freely floating wave energy converter 09002

A. Jabrali, R. Khatyr and J. Khalid Naciri

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928609002

Open Access

Effects of Rheological Parameters of a Viscoplastic Fluid on Peristaltic Pumping in a Cylindrical Tube 09003

H. Rachid and M. Ouazzani Touhami

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928609003

Open Access

Flow behavior analysis of confined fluid in a flexible tube: application of asymptotic approach 09004

A. Mehdari, M. Agouzoul and M. Hasnaoui

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928609004

Open Access

Validation of a 1-D Elastohydrodynamic lubrication model 09005

Y. Bahi, M. Rahmoune and M. Elgadari

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928609005

Open Access

Numerical simulation of Effect of Contact Pressure on Gas Diffusion Layers deformation of a PEM Fuel Cell 09006

A. Atifi, K. El Bikri and M. Ettouhami

Published online: 14 August 2019

DOI: https://doi.org/10.1051/matecconf/201928609006

MATEC Web of Conferences

Volume 286 (2019)

14th Congress of Mechanics (CMM2019)

Statement of Peer review

Dynamics, Vibrations and Acoustics

Vibrations piezo-control of FGM beam in a thermal environment 01001

Vibration suppression for high speed railway bridges using fluid viscous dampers 01002

Nonlinear multimodal electromagnetic device for vibration energy harvesting 01003

Three-dimensional modeling of the static behavior of magneto-electro-elastic multilayer plates based on an elastic support 01004

Vibration with non-linear damping. stochastic approach 01005

Dynamic analysis of beams on fractional viscoelastic foundation subject to a variable speed moving load 01006

The experimental validation of a numerical model for the receptance prediction 01007

Flutter and parametric stability analysis of axially moving composite graphene sheets 01008

Solid and Structural Mechanics Modelling

Elastic-Plastic Stresses in Shrink Fit with A Solid Shaft 02001

Probabilistic methodology for reliability assessment of electronic packages 02002

Development of a innovative solution for energy recovery from the flow exhaust gas on bench test facility of turbofan aircraft engine through the use of innovative design methods: Definition of the process and the operating environment 02003

Concentrated stress location areas for welded tubular T-joints under deflected bending load 02004

Meshfree method for large deformation in dynamic problems 02005

Analytical Modelling of Elastic Interference Fit Joints for Functionally Graded Materials 02006

A review and application of the failure criteria on a graphite epoxy under three-point bending test 02007

Numerical study of the effect of concrete cover and the friction of steel concrete interface 02008

Modeling and simulation of an underactuated system 02009

Solid and Composite Materials

The possibility of using a smartphone in a single plane rotor balancing 03001

Non-Linear Forced Vibration of Fully Clamped FGM Skew Plates using Homogenization Technique 03002

The effects of the temperature on the mechanical properties of natural yarns 03003

Optimization of elasticity of unidirectionnal non-overlapping fiber reinforced materials 03004

Numerical simulation of investment casting process of nickel-based alloy. 03005

Study of the mechanical behavior of light mortars produced by thermal treatment, with coal waste of Jerada mine (eastern Morocco) 03006

Vibration of composite thin-walled beams with variable open cross section by a high order implicit algorithm 03007

Integrated Design and Production, Manufacturing Processes

The optimization of a hydroformed tube 04001

Thermal-Electrical-Mechanical Simulation of High Pressure Spark Plasma Sintering (HP-SPS) Process 04002

A three dimensional meshfree-simulation of the selective laser sintering process with constant thermal coefficients applied to nylon 12 powders 04003

Fracture and Fatigue of Materials

Analytical estimation of the reliability of wire rope based on cumulative damage 05001

Consideration of the reconfigurable aspect in evaluating predictive reliability of mechatronic system 05002

Porous Media and Granular Media

Simultaneous estimation of hydro-dipersive parameters using a new modified levenberg-marquardt algorithm 06001

Investigational methods for the modeling of infiltration process in the soil and the estimating the soil hydrodynamic parameters 06002

Two unbound granular materials stiffness analysis with staged repeated load CBR test 06003

Fluid Mechanics, Rheology, Modeling, Instabilities and Transition

Numerical modeling transient flow in plastic pipes 07001

Magnetohydrodynamic effects on finite and infinite slider bearings 07002

A mesh-free approach for the simulation of incompressible flows 07003

Semi analytical method for calculating Dean's vortex in Torus of elliptical cross section 07004

Importance of rheology in the prediction of structural transition phenomena in geopolymer matrices loaded with phosphogypsum 07005

Reducing drag on a flat plate subjected to incompressible laminar flow 07006

Thermal convection instability of two miscible viscous fluids in a Hele-Shaw cell 07007

Transient energy growth of channel flow with cross-flow 07008

Dominant modes in hydromagnetic stability of channel flow with porous walls 07009

Instability of a viscous interface under horizontal quasi-periodic oscillation 07010

Interfacial instability of two inviscid fluid layers under quasi-periodic oscillations 07011

Impact of model resolution on numerical weather prediction 07012

Data assimilation for control of a plane mixing layer 07013

Control of the Interfacial Instabilities in a circular Hele-Shaw cell oscillating with a periodic angular velocity 07014

Separation stability in binary mixtures with negative Soret numbers 07015

Transport mechanisms inside the turbulent wake of a bluff body 07016

Numerical study of an impeller design for a new ventricular assist device 07017

Simulation of compressible and incompressible flows in the presence of shocks 07018

Heat Transfers, Mass Transfers, Renewable Energies and Environment

Permeation of Toluene into (Polypropylene/Acrylonitrile-co-butadiene Rubber) immiscible blend 08001

Heat transfer enhancement using two isothermal blocks in a cylindrical heat exchanger 08002

Thermal transfer of Nanofluids based on carbon nanotubes/glycerol and study of their rheological behavior 08003

Numerical simulation of coupeld heat transfer through a concrete hollow brick 08004

Direct carbon fuel cell simulation using hybrid lb-fv approach: effect of carbon fuel specific surface area 08005

Synthesis study on thermal insulation improvement in construction materials 08006

Novel Cascade Solar Desalination Still: Mathematical, Numerical and Experimental Analysis 08007

Computational parametric study of latent melting heat storage 08008

Numerical Study Of Thermal Behavior Of Anisotropic Medium In Bidirectional Cylindrical Geometry 08009

Jeffery-Hamel slip flow in a convergent microchannel with uniform wall temperature and streamwise heat conduction 08010

Ground measurements of dcmix 4 project Fullerene based nanofluid 08011

Fluid-Structure Interaction

Use of the corrected plane wave model for the determination of the reflection coefficient during horizontal plate swell interaction 09001

Parameters variation effects on energy recovery for a freely floating wave energy converter 09002

Effects of Rheological Parameters of a Viscoplastic Fluid on Peristaltic Pumping in a Cylindrical Tube 09003

Flow behavior analysis of confined fluid in a flexible tube: application of asymptotic approach 09004

Validation of a 1-D Elastohydrodynamic lubrication model 09005

Numerical simulation of Effect of Contact Pressure on Gas Diffusion Layers deformation of a PEM Fuel Cell 09006

14^th Congress of Mechanics (CMM2019)