Free Access to the whole issue

Open Access

Statement of Peer review

Published online: 18 September 2018

• PDF (42.0 KB)

Open Access

About the conference

Published online: 18 September 2018

• PDF (1.41 MB)

Keynotes

Open Access

A Review of Progressive and Compound Forming of Bulk Microparts by Using Sheet Metals 01001

M.W. Fu, J.Y. Zheng and B. Meng

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819001001

• Abstract
• PDF (3.315 MB)
• References

Open Access

Applications of the Gurson’s model in sheet metal forming 01002

Dorel Banabic and Abdolvahed Kami

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819001002

• Abstract
• PDF (549.5 KB)
• References

Open Access

An integrated precise engineering for micro forming 01003

Ming YANG, Tetsuhide Shimizu, Jun Hu and Tomomi Shiratori

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819001003

• Abstract
• PDF (1.337 MB)
• References

Advanced manufacturing processes

Open Access

Simulation of thermal behaviours and powder flow for direct laser metal deposition process 02001

Quanren Zeng, Yankang Tian, Zhenhai Xu and Yi Qin

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819002001

• Abstract
• PDF (1.873 MB)
• References

Open Access

Laser edge forming to increase the bending radius in hemming 02002

Peer Woizeschke, Lukas Heinrich and Philip Eichner

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819002002

• Abstract
• PDF (2.281 MB)
• References

Open Access

Deburring and rounding of sheet metals and functionally relevant edges of parts using laser radiation 02003

Judith Kumstel and Sven Lüken

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819002003

• Abstract
• PDF (569.0 KB)
• References

Open Access

Incremental magnetic pulse welding of dissimilar sheet metals 02004

Verena Psyk, Maik Linnemann, Christian Scheffler, Petr Kurka and Dirk Landgrebe

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819002004

• Abstract
• PDF (1.694 MB)
• References

Open Access

Investigation of microstructure and hardness of a rib geometry produced by metal forming and wire-arc additive manufacturing 02005

Markus Hirtler, Angelika Jedynak, Benjamin Sydow, Alexander Sviridov and Markus Bambach

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819002005

• Abstract
• PDF (1.082 MB)
• References

Open Access

Energy of Laser Induced Shockwaves 02006

Tobias Czotscher and Tim Wünderlich

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819002006

• Abstract
• PDF (290.7 KB)
• References

Bulk metal forming

Open Access

Electrohydraulic incremental bulk metal forming 03001

Lasse Langstädtler, Holger Pegel, Marius Herrmann, Christian Schenck and Bernd Kuhfuss

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819003001

• Abstract
• PDF (571.6 KB)
• References

Open Access

Bulk Metal Forming of Additively Manufactured Elements 03002

Thomas Papke, Daniel Junker, Michael Schmidt, Tobias Kolb and Marion Merklein

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819003002

• Abstract
• PDF (1.670 MB)
• References

Cold forming

Open Access

Generation of residual stresses in rotary swaging process 04001

Dhia Charni, Svetlana Ishkina, Jérémy Epp, Marius Herrrmann, Christian Schenck, Hans-Werner Zoch and Bernd Kuhfuss

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819004001

• Abstract
• PDF (1.171 MB)
• References

Open Access

The influence of microstructure deformation on the corrosion resistance of cold formed stainless steel 04002

Ingmar Bösing, Marius Herrmann, Ilya Bobrov, Jorg Thöming, Bernd Kuhfuss, Jérémy Epp and Michael Baune

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819004002

• Abstract
• PDF (808.8 KB)
• References

Open Access

Axial and Radial Material Flow Analysis in Infeed Rotary Swaging of Tubes 04003

Yang Liu, Marius Herrmann, Christian Schenck and Bernd Kuhfuss

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819004003

• Abstract
• PDF (1.087 MB)
• References

Open Access

Influence of a modified drawing process on the resulting residual stress state of cold drawn wire 04004

Markus Baumann, Alexander Graf, René Selbmann, Katrin Brömmelhoff, Verena Kräusel, Dirk Landgrebe and Markus Bergmann

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819004004

• Abstract
• PDF (585.8 KB)
• References

Open Access

Numerical modelling of T-pipe joints forming 04005

Jarosław Bartnicki

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819004005

• Abstract
• PDF (783.9 KB)
• References

Open Access

Push-bending Process and Forming Quality of Stainless-steel Tubes 04006

Chen Guo-qing, Yang Jian, Li Hong-xiang, Fu Xue-song, Tang Rui and Zhou Wen-long

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819004006

• Abstract
• PDF (750.1 KB)
• References

Deep drawing

Open Access

Effect on the mechanical properties of sheet metals after the use of drawbeads in deep drawing 05001

Harald Schmid and Marion Merklein

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819005001

• Abstract
• PDF (452.1 KB)
• References

Extrusion

Open Access

Development of a novel high straining backward extrusion process 06001

Qiang Wang, Zhimin Zhang, Xubin Li and Huifang Zhang

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819006001

• Abstract
• PDF (493.1 KB)
• References

Hot forming

Open Access

Investigation on precision and performance for hot gas forming of thin-walled components of Ti2AlNb-based alloy 07001

Xueyan Jiao, Zhiqiang Liu, Yong Wu and Gang Liu

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819007001

• Abstract
• PDF (1.018 MB)
• References

Open Access

Influence of heat treatment on the microstructure and mechanical properties of TC17 Titanium Alloy 07002

Wang Min, Huang Darong, Fan Ya, Nin YongQuan, Guo Hongzhen and Yao Zekun

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819007002

• Abstract
• PDF (682.8 KB)
• References

Open Access

Hot stretch forming of titanium sheet by resistance heating 07003

Xiaoqiang Li, Hongrui Dong, Guiqiang Guo and Dongsheng Li

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819007003

• Abstract
• PDF (562.3 KB)
• References

Open Access

In-situ measurement technologies for flow behaviour and contact status of fibre-reinforced thermoplastics during forming with a six degree of freedom press 07004

Birk Wonnenberg, Franz Dietrich and Klaus Dröder

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819007004

• Abstract
• PDF (583.4 KB)
• References

Hot stamping

Open Access

Feasibility study of a novel hot stamping process for Ti6Al4V alloy 08001

Mateusz Kopec, Kehuan Wang, Yaoqi Wang, Liliang Wang and Jianguo Lin

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819008001

• Abstract
• PDF (524.6 KB)
• References

Open Access

Numerical study of the induction heating of aluminium sheets for hot stamping 08002

Yankang Tian, Libo Wang, Gerald Anyasodor and Yi Qin

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819008002

• Abstract
• PDF (1.052 MB)
• References

Open Access

Research on the Compound Process of Hot Stamping and Heat Treatment for Duralumin Alloy Fairing with Large Aspect Ratio: Experiment and modeling 08003

Lingzhi Xu, Lihua Zhan, Minghui Huang, Liang Guo and Ziyao Ma

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819008003

• Abstract
• PDF (612.1 KB)
• References

Open Access

Investigation of diffusion behavior of carburized sheet metal in hot stamping 08004

Alexander Horn and Marion Merklein

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819008004

• Abstract
• PDF (232.3 KB)
• References

Open Access

Characterisation of the contact pressure dependent interfacial heat transfer coefficient for a hot stamping process following a data driven approach 08005

Xiaochuan Liu, Yang Zheng, Omer El Fakir, Rajab Said and LiLiang Wang

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819008005

• Abstract
• PDF (503.0 KB)
• References

Hydroforming

Open Access

New Device and Technology for High Speed Hydroforming 09001

Matthias Hermes, Aynur Keskin and Christoph Berlinger

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819009001

• Abstract
• PDF (854.1 KB)
• References

Open Access

Springback prediction of CP2 titanium sheets in hydroforming with membrane diaphragm process with finite element method 09002

Cahit Sertac Aydogan, Hasan Ali Hatipoglu and Omer Keles

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819009002

• Abstract
• PDF (2.071 MB)
• References

Open Access

Investigation of a Modified Hydrodynamic Deep Drawing Assisted by Radial Pressure with Inward Flowing Liquid Process 09003

Maziar Khademi, Milad Sadegh yazdi, Mohammad Bakhshi-Jooybari and Hamid Gorji

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819009003

• Abstract
• PDF (544.1 KB)
• References

Micro forming

Open Access

Investigation into the micro deep drawing capabilities of a specially engineered refined aluminium alloy 10001

A. Dhal, S.K. Panigrahi and M.S. Shunmugam

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819010001

• Abstract
• PDF (1.038 MB)
• References

Open Access

Micro formed holographic security features in steel 10002

Eckart Uhlmann, Stephanie Schulze, née Frenzel, Julian Polte, Christoph Hein, Johannes Matthiesen and Manfred Böge

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819010002

• Abstract
• PDF (1.103 MB)
• References

Open Access

Generation of micro channels in AlMg4.5Mn0.7 sheets using a vibration-assisted micro forming process 10003

Benedikt Müller and Andreas Schubert

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819010003

• Abstract
• PDF (2.848 MB)
• References

Open Access

Forming of micro gears by compressing a pure copper sheet through its thickness 10004

Amirreza Asghari Ganji, Mohammad Bakhshi-Jooybari and Hamid Gorji

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819010004

• Abstract
• PDF (741.9 KB)
• References

Open Access

Hot embossing of polypropylene micro-tubes into functional tubular components with controlled inner-pore sizes 10005

Jie Zhao and Yi Qin

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819010005

• Abstract
• PDF (1.093 MB)
• References

Open Access

Fabrication of WC-TiC-Co Cemented Carbide at Different Heating Rate by Micro-FAST process 10006

Yitong Chen, Yi Yang, Gang Yang, Libo Wang and Mingxia Wu

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819010006

• Abstract
• PDF (995.7 KB)
• References

Open Access

Fabrication of Miniature Components from ZrO2 Powder by Combining Electrical-field Activated Sintering Technique and Micro-forming 10007

Hasan Hijji, Yi Qin, Kunlan Haung, Muhammad Bin Zulkipli and Jie Zhao

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819010007

• Abstract
• PDF (4.607 MB)
• References

Rolling/Rollforming

Open Access

Effect of annealing on microstructure and hardness of thin aluminium strips fabricated by micro flexible rolling 11001

Mingshuai Huo, Jingwei Zhao, Haibo Xie and Zhengyi Jiang

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819011001

• Abstract
• PDF (1.650 MB)
• References

Open Access

Internal Flow-Turning – extended manufacturing possibilities in tailored tube production 11002

Eugen Wiens and Werner Homberg

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819011002

• Abstract
• PDF (680.4 KB)
• References

Open Access

The effect of radial-shear rolling on microstructure and mechanical properties of stainless austenitic steel AISI-321 11003

Abdrakhman Naizabekov, Sergey Lezhnev, Alexandr Arbuz and Evgeniy Panin

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819011003

• Abstract
• PDF (852.4 KB)
• References

Open Access

Analysis of deformation characteristics and microstructure variation of thick plate during asymmetric shear rolling 11004

Tao Zhang, Lei Li and Shihong Lu

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819011004

• Abstract
• PDF (706.1 KB)
• References

Open Access

Investigation of a plain ball burnishing process on differently machined Aluminium EN AW 2007 surfaces 11005

Marco Posdzich, Rico Stöckmann, Florian Morczinek and Matthias Putz

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819011005

• Abstract
• PDF (878.8 KB)
• References

Open Access

A New Cross Wedge Rolling Process for Producing Rail Axles 11006

Zbigniew Pater and Janusz Tomczak

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819011006

• Abstract
• PDF (850.4 KB)
• References

Open Access

EBSD study of microstructure evolution of ferritic stainless steel during cold rolling and annealing 11007

Chi Zhang, Yijie Xu, Liwen Zhang and Yinlin Gu

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819011007

• Abstract
• PDF (1.365 MB)
• References

Sheet metal forming

Open Access

Electrohydraulic sheet metal forming with flexible tools 12001

Holger Pegel, Lasse Langstädtler, Marius Herrmann, Christian Schenck and Bernd Kuhfuss

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819012001

• Abstract
• PDF (812.7 KB)
• References

Open Access

Influence of material damage during the forming process on the vibration fatigue behaviour of a clinched connection. 12002

Bernd Maier, Markus Klingler, Sabine Böhm and Birgit Awiszus

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819012002

• Abstract
• PDF (633.7 KB)
• References

Open Access

Improving the formability of magnesium by cushion-ram-pulsation 12003

Anja Rautenstrauch, Johannes Luft, Peter Birnbaum, Markus Baumann, Madlen Ullmann, Verena Kräusel, Dirk Landgrebe, Rudolf Kawalla and Ulrich Prahl

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819012003

• Abstract
• PDF (1.429 MB)
• References

Open Access

Numerical modelling approach for the temperature dependent forming behaviour of Ti-6Al-4V 12004

Thomas Papke, Matthias Graser and Marion Merklein

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819012004

• Abstract
• PDF (592.7 KB)
• References

Open Access

Stress-level-dependent microstructure evolution and deformation behaviors during creep age forming of AA2219 alloy 12005

Ziyao Ma, Lihua Zhan, Chunhui Liu and Lingzhi Xu

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819012005

• Abstract
• PDF (1.183 MB)
• References

Open Access

Effect of initial temper on mechanical properties of creep-aged Al-Cu-Li alloy AA2050 12006

Yong Li, Yo-Lun Yang, Qi Rong, Zhusheng Shi, Jianguo Lin and Rajab Said

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819012006

• Abstract
• PDF (485.3 KB)
• References

Open Access

Experimental Investigation on Creep Forming of A New Al-Li-Cu-Mg Alloy Plate 12007

BAI Xuepiao, LI Hong, ZENG Yuansong, WANG Mingtao, LYU Fenggong and MENG Qiang

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819012007

• Abstract
• PDF (589.8 KB)
• References

Open Access

Investigation of a partial, inductive short-time heat treatment of thin metal sheets integrated into the forming process 12008

Benjamin Clausius and Petra Maier

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819012008

• Abstract
• PDF (511.4 KB)
• References

Tool design and tribology

Open Access

Geometrical design of micro-textured DLC coatings toward lubricant-free metal forming 13001

Tetsuhide Shimizu, Hironori Kan, Hamza Messaoudi, Frank Vollertsen and Ming Yang

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819013001

• Abstract
• PDF (758.8 KB)
• References

Open Access

Experimental studies of the efficient use of flexible tool in creep age forming 13002

Qi Rong, Yong Li, Xiaoguang Sun, Zhusheng Shi, Lichun Meng and Jianguo Lin

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819013002

• Abstract
• PDF (499.4 KB)
• References

Open Access

Material flow control in sheet-bulk metal forming processes using blasted tool surfaces 13003

Marion Merklein, Maria Löffler, Daniel Gröbel and Johannes Henneberg

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819013003

• Abstract
• PDF (1.660 MB)
• References

Dry metal forming, Special session SPP 1676

Open Access

Observation of the a-C:H run-in behaviour for dry forming applications of aluminium 14001

Tim Abraham, Günter Bräuer, Felix Kretz and Peter Groche

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819014001

• Abstract
• PDF (1.507 MB)
• References

Open Access

Adaption of tribological behavior of a-C:H coatings for application in dry deep drawing 14002

Tom Häfner, Benedict Rothammer, Jennifer Tenner, Kim Krachenfels, Marion Merklein, Stephan Tremmel and Michael Schmidt

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819014002

• Abstract
• PDF (1.520 MB)
• References

Open Access

Selective oxidation of tool steel surfaces under a protective gas atmosphere using inductive heat treatment 14003

S. Schöler, D. Yilkiran, D. Wulff, F. Özkaya, K. Möhwald, B.-A. Behrens and H.J. Maier

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819014003

• Abstract
• PDF (1.119 MB)
• References

Open Access

The influence of process parameters on the temperature development in the forming zone 14004

Philipp Tröber, Markus Welm, Hannes Alois Weiss, Peter Demmel, Roland Golle and Wolfram Volk

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819014004

• Abstract
• PDF (334.9 KB)
• References

Open Access

Influence of alternating bending on springback behavior of parts in deep drawing process with macro-structured tools 14005

Ali Mousavi, Kevin Sven Ridolfi and Alexander Brosius

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819014005

• Abstract
• PDF (756.9 KB)
• References

Open Access

Tool surface with a supporting plateau of hard particles for deep drawing of high alloy steel 14006

Hannes Freiße and Thomas Seefeld

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819014006

• Abstract
• PDF (1.062 MB)
• References

Open Access

Lubricant-free deep drawing using CO2 and N2 as volatile media injected through laser-drilled microholes 14007

Ehsan Zahedi, Christoph Woerz, Gerd Reichardt, Georg Umlauf, Mathias Liewald, Jakob Barz, Rudolf Weber and Thomas Graf

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819014007

• Abstract
• PDF (1.118 MB)
• References

Open Access

Influence of the surface microstructure on the adhesion of a CVD-diamond coating on steel with a CrN interlayer 14008

Markus Prieske, Richard Börner and Andreas Schubert

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819014008

• Abstract
• PDF (1.644 MB)
• References

Open Access

Influence of surface integrity on the plastic flow in analogous testing of 42CrMo4 14009

Rafael Hild, Andreas Feuerhack, Daniel Trauth, Dennis C. Hoffmann, Nathan C. Kruppe, Tobias Brögelmann, Kirsten Bobzin and Fritz Klocke

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819014009

• Abstract
• PDF (592.4 KB)
• References

Open Access

Probing the potential of structured and surface functionalized tools for dry cold forging of aluminium 14010

Marco Teller, Ingo Ross, Stephan Prünte, André Temmler, Moritz Küpper, Reinhart Poprawe, Jochen M. Schneider and Gerhard Hirt

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819014010

• Abstract
• PDF (1.293 MB)
• References

Open Access

Reducing Abrasive Particle Generation in Dry Rotary Swaging by Utilizing DLC Hard Coated Dies 14011

Florian Böhmermann, Marius Herrmann, Oltmann Riemer and Bernd Kuhfuss

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819014011

• Abstract
• PDF (1.695 MB)
• References

Open Access

A new approach for dry metal forming: CO2 as volatile lubrication in combination with hard and low friction coatings 14012

Georg Umlauf, Henning Hasselbruch, Jan Hinnerk Henze, Jakob Barz and Andreas Mehner

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819014012

• Abstract
• PDF (937.6 KB)
• References

Micro cold forming, Special session SFB 747

Open Access

Tensile properties and drawability of thin bimetallic aluminum-scandium-zirconium / stainless steel foils and monometallic Al-Sc-Zr fabricated by magnetron sputtering 15001

Julien Kovac, Lukas Heinrich, Bernd Koehler, Andreas Mehner, Brigitte Clausen and Hans-Werner Zoch

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819015001

• Abstract
• PDF (990.1 KB)
• References

Open Access

High productivity micro rotary swaging 15002

Eric Moumi, Marius Herrmann, Christian Schenck and Bernd Kuhfuss

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819015002

• Abstract
• PDF (1007 KB)
• References

Open Access

Eccentric rotary swaging variants 15003

Anastasiya Toenjes, Svetlana Ishkina, Christian Schenck, Axel von Hehl, Hans-Werner Zoch and Bernd Kuhfuss

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819015003

• Abstract
• PDF (1.227 MB)
• References

Open Access

Interactions between feed system and process in production of preforms as linked micro parts 15004

Philipp Wilhelmi, Christine Schattmann, Christian Schenck and Bernd Kuhfuss

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819015004

• Abstract
• PDF (991.5 KB)
• References

Open Access

Application of Cause-Effect-Networks for the process planning in laser rod end melting 15005

Daniel Rippel, Christine Schattmann, Mischa Jahn, Michael Lütjen and Alfred Schmidt

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819015005

• Abstract
• PDF (767.9 KB)
• References

Open Access

Increased output in micro production by tolerance field widening and synchronisation 15006

Ann-Kathrin Onken, Philipp Wilhelmi, Kirsten Tracht and Bernd Kuhfuss

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819015006

• Abstract
• PDF (433.6 KB)
• References

Open Access

Inverting Prediction Models in Micro Production for Process Design 15007

Phil Gralla, Iwona Piotrowska-Kurczewski, Daniel Rippel, Michael Lütjen and Peter Maaß

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819015007

• Abstract
• PDF (451.8 KB)
• References

Open Access

Fast Quality Inspection of Micro Cold Formed Parts using Telecentric Digital Holographic Microscopy 15008

Mostafa Agour, Claas Falldorf, Benjamin Staar, Axel von Freyberg, Andreas Fischer, Michael Lütjen and Ralf B. Bergmann

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819015008

• Abstract
• PDF (855.9 KB)
• References

Open Access

Inline tool wear measurement in lateral micro upsetting 15009

Joseph Seven, Lukas Heinrich and Hendrik Flosky

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819015009

• Abstract
• PDF (553.1 KB)
• References

Open Access

Chances and Limitations in the Application of Laser Chemical Machining for the Manufacture of Micro Forming Dies 15010

Hamza Messaoudi, Florian Böhmermann, Merlin Mikulewitsch, Axel von Freyberg, Andreas Fischer, Oltmann Riemer and Frank Vollertsen

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819015010

• Abstract
• PDF (2.503 MB)
• References

Open Access

Methodology for Reliable Tribological Investigations Applying a Micro Tribometer in Ball-on-Plate Configuration 15011

Florian Böhmermann and Oltmann Riemer

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819015011

• Abstract
• PDF (1.858 MB)
• References

Open Access

Development and application of methods to characterize micro semi-finished products and micro components 15012

Bernd Köhler, Brigitte Clausen and Hans-Werner Zoch

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819015012

• Abstract
• PDF (1.736 MB)
• References

Open Access

Process chain for the fabrication of hardenable aluminium-zirconium micro-components by deep drawing 15013

Anastasiya Toenjes, Julien Kovac, Bernd Koehler, Axel von Hehl, Andreas Mehner, Brigitte Clausen and Hans-Werner Zoch

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819015013

• Abstract
• PDF (616.8 KB)
• References

Open Access

Material flow control in plunge micro rotary swaging 15014

Eric Moumi, Philipp Wilhelmi, Christian Schenck, Marius Herrmann and Bernd Kuhfuss

Published online: 18 September 2018

DOI: https://doi.org/10.1051/matecconf/201819015014

• Abstract
• PDF (1.438 MB)
• References