Open Access
MATEC Web Conf.
Volume 190, 2018
5th International Conference on New Forming Technology (ICNFT 2018)
Article Number 14010
Number of page(s) 7
Section Dry metal forming, Special session SPP 1676
Published online 18 September 2018
  1. F. Vollertsen, F. Schmidt, International Journal of Precision Engineering and Manufacturing-Green Technology 1 (2014) 59-62. [Google Scholar]
  2. P. Groche, C. Müller, J. Stahlmann, S. Zang, Tribology International 62 (2013) 223-231. [Google Scholar]
  3. I. Ross, A. Temmler, E. Willenborg, R. Poprawe, M. Teller, in: T. Graf, L. Overmeyer, F. Vollertsen, Lasers in Manufacturing Conference 2015, 2015. [Google Scholar]
  4. S. Prünte, D. Music, M. Teller, G. Hirt. P.H. Mutin, G. Ramanath, J.M. Schneider, J. Vac. Sci. Technol. A 35 (2017) 020605. [CrossRef] [Google Scholar]
  5. M. Teller, S. Prünte, I. Ross, A. Temmler, J.M. Schneider, G. Hirt, AIP Conference Proceedings 1896 (2017) 140001. [CrossRef] [Google Scholar]
  6. I. Ross, A. Temmler, M. Küpper, S. Prünte, M. Teller, J. M. Schneider, R. Poprawe, KEM 767 (2018) 69-76. [CrossRef] [Google Scholar]
  7. N. Bay, “International Cold Forging Group – 1967-1992 – Objectives, History, Published Documents”, 1992. [Google Scholar]
  8. W. Zhang, N. Bay, CIRP Annals - Manufacturing Technology 41 (1992) 293-297. [CrossRef] [Google Scholar]
  9. H. Bolvardi, D. Music, and J. M. Schneider, Thin Solid Films 589 (2015) 707-711. [CrossRef] [Google Scholar]
  10. H. Bolvardi, D. Music, and J. M. Schneider, Appl. Surf. Sci. 332 (2015) 699-703. [CrossRef] [Google Scholar]
  11. G. G. Fuentes, M. J. Dýaz de Cerio, R. Rodriguez, J. C. Avelar-Batista, E. Spain, J. Housden, and Y. Qin, J. Mater. Process. Technol. 177 (2006) 644-648. [CrossRef] [Google Scholar]
  12. M. Teller, M. Bambach, G. Hirt, CIRP Annals - Manufacturing Technology 64 (2015) 289-292. [CrossRef] [Google Scholar]
  13. A. Temmler, E. Willenborg, and K. Wissenbach, “Laser Polishing” Proceedings of the SPIE, Volume 8243, DOI: 10.1117/12.906001, 2012a. [Google Scholar]
  14. E. Willenborg, “Polieren von Werkzeugstählen mit Laserstrahlung” Ph.D. Thesis, RWTH Aachen, Aachen, 3-8322-4896-x, 2006. [Google Scholar]
  15. N. Pirch, S. Höges, and K. Wissenbach, “Mechanisms of surface rippling during laser polishing” Proceedings of the 8. International Seminar on Numerical Analysis of Weldability, Graz-Seggau, Austria, 2006. [Google Scholar]
  16. J. Blackburn, P. Hilton, Physics Procedia 12 (2011) 529-536. [CrossRef] [Google Scholar]
  17. A. Temmler, “Laserumschmelzstrukturierung” PhD. Thesis, RWTH Aachen University, Aachen, ISBN 978-3-8440-1837-0, 2013. [Google Scholar]
  18. R. Ostholt, “Laserpolieren metallischer Freiformen”, PhD. Thesis, RWTH Aachen University, Aachen, ISBN 978-3-8440-0696-4, 2012. [Google Scholar]
  19. G. Guerrero, J. G. Alauzun, M. Granier, D. Laurencin, and P. H. Mutin, Dalton Trans. 42 (2013) 12569-12585. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.