| Issue |
MATEC Web Conf.
Volume 190, 2018
5th International Conference on New Forming Technology (ICNFT 2018)
|
|
|---|---|---|
| Article Number | 12007 | |
| Number of page(s) | 10 | |
| Section | Sheet metal forming | |
| DOI | https://doi.org/10.1051/matecconf/201819012007 | |
| Published online | 18 September 2018 | |
Experimental Investigation on Creep Forming of A New Al-Li-Cu-Mg Alloy Plate
1
AVIC Manufacturing Technology Institute
2
Aeronautical Key Laboratory for Plastic Forming Technology
3
Beijing Key Laboratory of Digital Plasticity Forming Technology and Equipment
*
Corresponding author: baixp@163.com
Fundamental creep fonning experiments on a new Al-Li-Cu-Mg alloy plate were carried out to investigate the forming parameters of integral reinforced panel with thin skin. The effects of process parameters on springback ratio and material properties are investigated by orthogonal design method. The result data show that the springback ratio decreases with the temperature and tune period of creep age forming, increases with radius of pre-bend. The tension strength and yield strength increase and then decrease with temperature of creep forming. The elongation decreases with the temperature of creep forming. A mathematical equation model for springback ratio is proposed and resolved thorough regression analysis method. A typical structure of fuselage panel is creep formed, which verified the effectiveness and accuracy of the mathematical equation model.
Key words: Metal forming / Alloy / Thermal effects
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.