Investigation of a Modified Hydrodynamic Deep Drawing Assisted by Radial Pressure with Inward Flowing Liquid Process

Open Access

Issue		MATEC Web Conf. Volume 190, 2018 5^th International Conference on New Forming Technology (ICNFT 2018)


Article Number		09003
Number of page(s)		6
Section		Hydroforming
DOI		https://doi.org/10.1051/matecconf/201819009003
Published online		18 September 2018

M. Bakhshi-Jooybari, A. Gorji, and M. Elyasi, Developments in sheet hydroforming for complex industrial parts, in Metal Forming-Process, Tools, Design, InTech. (2012) [Google Scholar]
S. M. Kulkarni, V. V. Ruiwale, M. S. Jadhao, A. A. Kadam, S. R. & Kale, A review on Hydroforming Processes, Ijcet. (2017). [Google Scholar]
H. Hu, J. F. Wang, K. T. Fan, T. Y. Chen, & Wang, S. Y., Development of sheet hydroforming for making an automobile fuel tank. Proc. Inst. Mech. Eng. B, 229(4): p. 654-663, (2015). [CrossRef] [Google Scholar]
G. Palumbo, S. H. Zhang, L. Tricarico, C. Xu, & L. X. Zhou, Numerical/experimental investigations for enhancing the sheet hydroforming process. Int J Mach Tool Manu, 46(11): p. 1212-1221, (2006). [CrossRef] [Google Scholar]
B. Modi, and D.R. Kumar, Development of a hydroforming setup for deep drawing of square cups with variable blank holding force technique. Int. J. Adv. Manuf. Technol., 66(5-8): p. 1159-1169, (2013). [CrossRef] [Google Scholar]
S. Thiruvarudchelvan, and W. Lewis, A note on hydroforming with constant fluid pressure. J Mater Process Tec, 88(1-3): p. 51-56, (1999). [CrossRef] [Google Scholar]
A. Kandil, An experimental study of hydroforming deep drawing. J Mater Process Tec, 134(1): p. 70-80, (2003). [CrossRef] [Google Scholar]
S. Bagherzadeh, M. Mirnia, and B.M. Dariani, Numerical and experimental investigations of hydro-mechanical deep drawing process of laminated aluminum/steel sheets. JMP, 18: p. 131-140, (2015). [Google Scholar]
S.-H. Zhang and J. Danckert, Development of hydro-mechanical deep drawing. J Mater Process Tec, 83(1-3): p. 14-25, (1998). [Google Scholar]
A. Gorji, H. Alavi-Hashemi, M. Bakhshi-Jooybari, S. Nourouzi, and S.J. Hosseinipour, Investigation of hydrodynamic deep drawing for conical–cylindrical cups. Int. J. Adv. Manuf. Technol., 56(9-12): P. 915, (2011). [CrossRef] [Google Scholar]
H. Wang, L. Gao, and M. Chen, Hydrodynamic deep drawing process assisted by radial pressure with inward flowing liquid, Int. J. Mech. Sci., 53(9): p. 793-799, (2011). [CrossRef] [Google Scholar]
J. Tirosh, A. Shirizly, D. Ben-David, and S. Stanger, Hydro-rim deep-drawing processes of hardening and rate-sensitive materials. Int. J. Mech. Sci., 42(6): p. 1049-1067, (2000). [CrossRef] [Google Scholar]
M.S. Yazdi, M. Bakhshi-Jooybari, H. Gorji, M. Shakeri, and M. Khademi, Investigation of Forming Cylindrical Parts in a Modified Hydrodynamic Deep Drawing Assisted by Radial Pressure With Inward Flowing Liquid. J. of Manuf. Sci. and Eng., 140(3): p. 031007, (2018). [CrossRef] [Google Scholar]
M. Salahshoor, A. Gorji, and M. Bakhshi-Jooybari, The study of forming concave-bottom cylindrical parts in hydroforming process. Int. J. Adv. Manuf. Technol., 79(5-8): p. 1139-1151, (2015). [CrossRef] [Google Scholar]
M. Khademi, A. Gorji, M. Bakhshi, and M.S. Yazdi, Investigation of Wrinkling in Hydrodynamic Deep Drawing Assisted by Radial Pressure With Inward Flowing Liquid. Pro. Eng, 183: p. 65-70, (2017). [CrossRef] [Google Scholar]
J. Whitlock, The Seal Man’s O-Ring Handbook, EPM. Inc., Stockbridge, GA, (2004). [Google Scholar]
E. Onder, A. E. Tekkaya, Numerical Simulation of Various Cross Sectional Workpieces Using Conventional Deep Drawing and Hydroforming Technologies, Int. J. Mach. Tools Manuf., 48(5) : p. 532–542, (2008). [CrossRef] [Google Scholar]
M. Hosseinzade, H. Mostajeran, M. Bakhshi-Jooybari, A. H. Gorji, S. Nourouzi, and S. J. Hosseinipour, Novel Combined Standard Hydromechanical Sheet Hydroforming Process, Proc. Inst. Mech. Eng., Part B, 224(3) : pp. 447–457, (2010). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.