Open Access
| Issue |
MATEC Web Conf.
Volume 190, 2018
5th International Conference on New Forming Technology (ICNFT 2018)
|
|
|---|---|---|
| Article Number | 15013 | |
| Number of page(s) | 8 | |
| Section | Micro cold forming, Special session SFB 747 | |
| DOI | https://doi.org/10.1051/matecconf/201819015013 | |
| Published online | 18 September 2018 | |
- J. Røyset, N. Ryum, Inter. Mater. Rev., 50, 19 (2005) [CrossRef] [Google Scholar]
- P. Cavaliere, Mater. Character., 57, 100 (2006) [CrossRef] [Google Scholar]
- J. Murray, A. Peruzzi, J.P. Abriata, J. Phase Equilib. 13, 277 (1992) [CrossRef] [Google Scholar]
- J. Kovac, H.-R. Stock, B. Köhler, H. Bomas, H.-W. Zoch, Surf. Coat. Tech., 215, 369 (2013) [CrossRef] [Google Scholar]
- G. Behrens, J. Kovac, B. Köhler, F. Vollersten, H.-R. Stock, T. Nonferr. Metal Soc., 22, 268 (2012) [Google Scholar]
- D. G. Constantin, M. Apreutesei, R. Arvinte, A. Marin, O. C. Andrei, D. Munteanu, RECENT, 12, 29 (2011). [Google Scholar]
- G. Behrens, F. O. Trier, H. Tetzel, F. Vollertsen, J. Mat. Form 9, 253 (2015) [Google Scholar]
- J. Kovac, H.-R. Stock, B. Koehler, H. Bomas, H.-W. Zoch, Surf. Coat. Tech., 215, 369 (2013) [CrossRef] [Google Scholar]
- J. Kovac, H.-R. Stock, H.-W. Zoch, Journal of Surface Engineered Materials and Advanced Technology, 2, 115 (2012) [CrossRef] [Google Scholar]
- A. Egorova, J. Kovac, A. von Hehl, A. Mehner, H.-W. Zoch, Mat.-Wiss. u Werkstofftech., 47, 989 (2016) [CrossRef] [Google Scholar]
- Y. Pauleau, Residual stresses in physically vapor deposited thin films In H. S. Nalwa, Handbook of Thin Films Vol. 1, Elsevier, Los Angeles (1992) [Google Scholar]
- B. Köhler, H. Bomas, H.-W. Zoch, J. Stalkopf, Engineering Integrity, 31, 18 (2011) [Google Scholar]
- K. E. Knipling, D. C. Dunand, D. N. Seidman, Acta Materialia, 56, 114 (2008) [CrossRef] [Google Scholar]
- Frank Vollertsen, Micro Metal Forming (Springer, Berlin, Heidelberg, 2013) [Google Scholar]
- F. Volletsen, Z. Hu, H. Schulze Niehoff, C. Theiler, J. Mat. Proc. Tech., 151, 1 (2004) [CrossRef] [Google Scholar]
- F. Vollertsen, Z. Hu, J. Technol. Plast., 32, 1 (2007) [Google Scholar]
- G. Behrens, F. O. Trier, H. Tetzel, F. Vollertsen, Int. J. Mater. Form., 9, 253 (2015) [Google Scholar]
- R. von Bargen, A. von Hehl, H.-W. Zoch, J. Heat Treatm. Mat., 65/2, 55 (2010) [CrossRef] [Google Scholar]
- Y. Harada, D. C. Dunand, Mat. Sci. Eng., A329-331, 686 (2002) [CrossRef] [Google Scholar]
- V. I Elagin, V. V. Zakharov, S. G. Pavlenko, T. D. Rostova, Phys. Met. Metall., 60, 88 (1985) [Google Scholar]
- K. Hirano, S. Fujikawa, J. Nuc. Mater., 69-70, 564 (1978) [CrossRef] [Google Scholar]
- K.-H. Muller, J. App. Phys., 62, 1796 (1987) [Google Scholar]
- K. Sarakinos, J. Alami, S. Konstantinidis, Surf. Coat. Tech., 204, 1661 (2010) [CrossRef] [Google Scholar]
- C. K. Syn, D. R. lesuer, J. Wolfenstine, O. D. Sherby, Met. Trans., 24A, 1647 (1993) [CrossRef] [Google Scholar]
- D. N. Lee, Y. K. Kim, J. Mat Sci., 23, 1436 (1988). [Google Scholar]
- M. H. Parsa, K. Yamaguchi, N. Takakura, Int. J. Mech. Sci., 43, 2331 (2001) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.