Open Access
Issue
MATEC Web Conf.
Volume 190, 2018
5th International Conference on New Forming Technology (ICNFT 2018)
Article Number 01002
Number of page(s) 7
Section Keynotes
DOI https://doi.org/10.1051/matecconf/201819001002
Published online 18 September 2018
  1. F.A. McClintock, J. Appl. Mech. 35, 363-371 (1968). [CrossRef] [Google Scholar]
  2. J.R. Rice and D.M. Tracey, J. Mech. Phys. Solids 17, 201-217 (1969). [CrossRef] [Google Scholar]
  3. A.L. Gurson, J. Eng. Mater. Technol. 99, 2-15 (1977). [CrossRef] [Google Scholar]
  4. V. Tvergaard, Int J Fracture 17, 389-407 (1981). [CrossRef] [Google Scholar]
  5. V. Tvergaard, Int J Fracture 18, 237-252 (1982). [Google Scholar]
  6. V. Tvergaard and A. Needleman, Acta Metall. 32, 157-169 (1984). [CrossRef] [Google Scholar]
  7. D. Banabic, Multiscale Modelling in Sheet Metal Forming. Springer, 2016. [CrossRef] [Google Scholar]
  8. A.A. Benzerga and J. Besson, Eur. J. Mech. A. Solids 20, 397-434 (2001). [CrossRef] [Google Scholar]
  9. R. Hill, Proc R Soc Lond A-Math Phys Eng Sci 193, 281-297 (1948). [CrossRef] [Google Scholar]
  10. V. Monchiet, C. Gruescu, E. Charkaluk, and D. Kondo, Comptes Rendus Mécanique 334, 431-439 (2006). [CrossRef] [Google Scholar]
  11. V. Monchiet, O. Cazacu, E. Charkaluk, and D. Kondo, Int. J. Plast. 24, 1158-1189 (2008). [CrossRef] [Google Scholar]
  12. S.M. Keralavarma and A.A. Benzerga, Comptes Rendus Mécanique 336, 685-692 (2008). [CrossRef] [Google Scholar]
  13. S.M. Keralavarma and A.A. Benzerga, J. Mech. Phys. Solids 58, 874-901 (2010). [CrossRef] [Google Scholar]
  14. L. Morin, J.-B. Leblond, and D. Kondo, Int J Solids Struct. 77, 86-101 (2015). [CrossRef] [Google Scholar]
  15. J.B. Stewart and O. Cazacu, Int J Solids Struct. 48, 357-373 (2011). [CrossRef] [Google Scholar]
  16. O. Cazacu, B. Plunkett, and F. Barlat, Int. J. Plast. 22, 1171-1194 (2006). [CrossRef] [Google Scholar]
  17. A. Kami, B.M. Dariani, A. Sadough Vanini, D.S. Comsa, and D. Banabic, J. Mater. Process. Technol. 216, 472-483 (2015). [CrossRef] [Google Scholar]
  18. K.C. Liao, J. Pan, and S.C. Tang, Mech. Mater. 26, 213-226 (1997). [CrossRef] [Google Scholar]
  19. D.A. Wang, J. Pan, and S.D. Liu, Int J Damage Mech 13, 7-33 (2004). [CrossRef] [Google Scholar]
  20. Z. Chen and X. Dong, Comp Mater Sci 44, 1013-1021 (2009). [CrossRef] [Google Scholar]
  21. F. Barlat and K. Lian, Int. J. Plast. 5, 51-66 (1989). [CrossRef] [Google Scholar]
  22. A. Kami, B. Mollaei Dariani, A. Sadough Vanini, D.-S. Comsa, and D. Banabic, Proc Rom Acad Ser A 15, 300-309 (2014). [Google Scholar]
  23. A. Bragard, Baret, J.C., Bonnarens, H., Rapp. Cent. Rech. Metall. 33, (1972). [Google Scholar]
  24. R. D’Haeyer, Bragard, A., Rap. Cent. Rech. Metall. 42, (1975). [Google Scholar]
  25. A. Kami, B.M. Dariani, D.S. Comsa, D. Banabic, A.S. Vanini, and M. Liewald, Proc Rom Acad Ser A 18, 281–290 (2017). [Google Scholar]
  26. A. Kami, B. Mollaei Dariani, D.S. Comsa, D. Banabic, A. Sadough Vanini, and M. Liewald, Rom. J. Techn. Sci. Appl. Mechanics 61, 248-264 (2016). [Google Scholar]
  27. M. Brunet, S. Mguil, and F. Morestin, J. Mater. Process. Technol. 80-81, 40-46 (1998). [CrossRef] [Google Scholar]
  28. O. Sokolova, A. Carradó, and H. Palkowski, Adv. Mater. Res. 137, 81-128 (2010). [CrossRef] [Google Scholar]
  29. A. Kami, K. Chung, and D. Banabic, Rom. J. Techn. Sci. Appl. Mechanics 62, 30–39 (2017). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.