Open Access
MATEC Web Conf.
Volume 190, 2018
5th International Conference on New Forming Technology (ICNFT 2018)
Article Number 15001
Number of page(s) 10
Section Micro cold forming, Special session SFB 747
Published online 18 September 2018
  1. Frank Vollertsen, Micro Metal Forming (Springer, Berlin, Heidelberg, 2013) [CrossRef] [Google Scholar]
  2. F. Vollertsen, Z. Hu, H. Schulze Niehoff, C. Theiler, J. Mat. Proc. Tech. 151, 70 (2004) [CrossRef] [Google Scholar]
  3. [Google Scholar]
  4. G. Behrens, F. O. Trier, H. Tetzel, F. Vollertsen, Int. J. Mater. Form. 9, 253 (2016) [CrossRef] [Google Scholar]
  5. G. Brabie, M. Costache, N. Nanu, B. Chirita, Int. J. Mech. Sci. 68, 277 (2013) [CrossRef] [Google Scholar]
  6. S. Hadi, A. Kiet Tieu, C. Lu, H. Zhu, Int. J. Mat. Prod. Tech., 47, 175 (2013) [CrossRef] [Google Scholar]
  7. J. Royset, N. Ryum, Int. Mat. Rev., 50, 19 (2005) [CrossRef] [Google Scholar]
  8. K. Yu, W. Li, S. Li, J. Zhao, Mat. Sci. Eng.A, 368, 88 (2004) [CrossRef] [Google Scholar]
  9. V. Neubert, B. Smola, I. Stulikova, A. Bakkar, J. Reuter, Mat. Sci. Eng. A, 464, 358 (2007) [CrossRef] [Google Scholar]
  10. A. Cabello Munoz, G. Rückert, B. Huneau, X. Sauvage, S. Marya, J. Mat. Proc. Tech., 197, 337 (2008) [CrossRef] [Google Scholar]
  11. S. Iwamura, Y. Miura, Acta Mat., 52, 591 (2004) [CrossRef] [Google Scholar]
  12. C. B. Fuller, J. L. Murray, D. N. Seidman, Acta Mater., 53, 5401 (2005) [CrossRef] [Google Scholar]
  13. M. Song, Y. He, S. Fang, J. Mater. Eng. Perform., 20, 377 (2011) [CrossRef] [Google Scholar]
  14. O. Roder, T. Wirtz, G. Gysler., G. Lutjering, Mat. Sci. Eng. A, 234-236, 181 (1997) [Google Scholar]
  15. [Google Scholar]
  16. J. Kovac, H.-R. Stock, B. Koehler, H. Bomas, H.-W. Zoch, Surf. Coat. Tech., 215, 369 (2013) [CrossRef] [Google Scholar]
  17. R. von Bargen, Z. Hu, H.-W. Zoch, F. Vollertsen, Materialwissenschaft und Werkstofftechnik, 42, 1035 (2011) [CrossRef] [Google Scholar]
  18. G. Behrens, J. Kovac, B. Koehler, H. Bomas, H.-W. Zoch, Trans. Nonferrous Met. Soc. China, 22, 268 (2012) [CrossRef] [Google Scholar]
  19. D. N. Lee, Y. K. Kim, J. Mat. Sci., 23, 1436 (1988) [CrossRef] [Google Scholar]
  20. M. H. Parsa, K. Yamaguchi, N. Takakura, Int. J. Mech. Sci., 43, 268 (2001) [CrossRef] [Google Scholar]
  21. H. Takuda, K. Mori, H. Fujimoto, N. Hatta., J. Mat. Proc. Tech., 60, 291 (1996) [CrossRef] [Google Scholar]
  22. E. Afshin, M. Kadkhodayan, Mat. Des., 87, 25 (2015) [Google Scholar]
  23. D. Pan, K. Gao, J. Yu, Mat. Sci. Tech., 5, 934 (1989) [CrossRef] [Google Scholar]
  24. B. Köhler, H. Bomas, J. Stalkopf, H.-W. Zoch, J. Eng. Integrity Soc., 31, 18 (2011) [Google Scholar]
  25. J. A. Thornton, J. Vac. Sci. Technol. A, 4, 3059 (1986) [CrossRef] [Google Scholar]
  26. K. H. Mueller, J. Appl. Phys., 62, 1796 (1987) [CrossRef] [Google Scholar]
  27. K. Sarakinos, J. Alami, S. Konstantidinis, Surf. Coat. Tech., 204, 1661 (2010) [CrossRef] [Google Scholar]
  28. M. Ohring, Material Science of Thin Films (second edition) (Academic Press, San Diego, San Francisco, New York, Boston, London, Sydney, Tokyo, 2002) [Google Scholar]
  29. S.-H. Choi, K.-H. Kim, K. H. Oh, D. N. Lee, Mat. Sci. Eng A, 222, 158 (1997) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.