EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 190 (2018) MATEC Web Conf., 190 (2018) 14012 References
Open Access
Issue
MATEC Web Conf.
Volume 190, 2018
5th International Conference on New Forming Technology (ICNFT 2018)
Article Number 14012
Number of page(s) 7
Section Dry metal forming, Special session SPP 1676
DOI https://doi.org/10.1051/matecconf/201819014012
Published online 18 September 2018
  1. Gesellschaft für Tribologie (Hrsg.): Tribologie – Verschleiß, Reibung, Definitionen, Begriffe, Prüfung. GfT-Arbeitsblatt 7, Aachen, (2002) [Google Scholar]
  2. Zum Gahr K.-H. : Microstructure and wear of materials. Tribology series, 10. New York: Elsevier, (1987) [Google Scholar]
  3. P. Skakun, I. Kacmarcik, T. Pepelnjak, O. Luzanin, A. Inavisevic, M. Milutinovic: Compersion of conventional and new lubricants for cold forming. 34th International conference on production engineering, (2011) [Google Scholar]
  4. M. Arentoft, N. Bay, P.T. Tang, J.D. Jensen: A new lubricant carrier for metal forming. CIRP Annals - Manufacturing Technology 58,243–246 (2009) [CrossRef] [Google Scholar]
  5. F. Vollertsen, F. Schmidt: Dry Metal Forming: Definition, Chances and Challenges. Int. J. Precision Engineering and Manufacturing – Green Technology 1/1, 59-62 (2014) [Google Scholar]
  6. N. Bay, A. Azushima, P. Groche, I. Ishibashi, M. Merklein, M. Morishita, T. Nakamura, S. Schmid, M. Yoshida: Environmentally benign tribo-systems for metal forming. CIRP Annals - Manufacturing Technology 59, 760–780 (2010) [Google Scholar]
  7. European Parliament, Council REACH, EC Regulation No. 1907/2006 of the European Parliament and of the Council, (2006) [Google Scholar]
  8. ICFG Doc. 10/95: Lubrication Aspects in Cold Forging of Aluminium and Aluminium Alloys. The International Cold Forging Group. WIRE 1, 1–12 (1996) [Google Scholar]
  9. Institute of Health and Consumer Protection (IHCP): European Union Risk Assessment Report, alkanes, C10-13, chloro (CAS No. 85535-84-8), (2008) [Google Scholar]
  10. A. Mousavi, A. Brosius: Track Tool concepts for dry forming. Dry Met. Forming OAJ FMT 1, 79–82 (2015) [Google Scholar]
  11. M. Liewald, T. Graf, T. Hirth, M. Singer, A. Feuer, E. Zahedi, G. Umlauf : Tribosysteme für die Kaltumformung auf der Basis von flüchtigen Schmiermedien und laserstrukturierten Oberflächen. Dry Met. Forming OAJ FMT 1, 22-33 (2015) [Google Scholar]
  12. P. C. Priarone, M. Robiglio, L. Settineri, V. Tabeldo: Milling and turning of titanium aluminides by using minimum quantity lubrication. New Production Technologies in Aerospace Industry - 5th Machining Innovations Conference, Procedia CIRP 24, 62–67 (2014) [Google Scholar]
  13. ChemicaLogic Corporation, http://www.chemicalogic.com/Pages/default.aspx (2015) [Google Scholar]
  14. X. Chen, Z. Peng, Z. Fu, S. Wu, W. Yue, C. Wang: Microstructural, mechanical and tribological properties of tungsten-gradually doped diamond-like carbon films with functionally graded interlayers. Surface and Coatings Technology, Vol. 205, 3631-3638 (2011) [CrossRef] [Google Scholar]
  15. A. Czyzniewski: Optimising deposition parameters of W-DLC coatings for tool materials of high speed steel and cemented carbide. Vacuum, Vol. 66, 2140-2147 (2012) [CrossRef] [Google Scholar]
  16. H. Hasselbruch, M. Herrmann, A. Mehner, H.-W. Zoch, B. Kuhfuss: Development, characterization and testing of tungsten doped DLC coatings for dry rotary swaging. MATEC Web of Conference, Vol. 21, 1-7 (2015) [CrossRef] [Google Scholar]
  17. M. Murakawa, M. Jin, M. Hyashi: Study on semidry/dry wire drawing using DLC coated dies. Surface and Coatings Technology, Vol. 177-178, 631-637 (2014) [CrossRef] [Google Scholar]
  18. H. Hetzner: Systematische Entwicklung amorpher Kohlenstoffschichten unter Berücksichtigung der Anfoderungen der Blechmassivumformung. Dissertation, University of Erlangen, (2014) [Google Scholar]
  19. H. Hasselbruch, M. Herrmann, A. Mehner, B. Kuhfuss, H.-W. Zoch: Incremental dry forging – Interaction of W-DLC coatings and surface structures for rotary swaging tools. Proceedia Manufacturing, Vol. 8, 541-548 (2017) [CrossRef] [Google Scholar]
  20. M. Liewald, S. Wagner, D. Becker: Ausstattung und Kompetenzen des Tribologie-Labors am Institut für Umformtechnik der Universität Stuttgart. IDDRG-Sitzung Düsseldorf, (2005) [Google Scholar]
  21. C. Wörz, E. Zahedi, G. Umlauf, M. Liewald, R. Weber, T. Graf, G. Tovar: Tiefziehen eines U-Profils mit flüchtigen Medien als Schmierstoffersatz. Dry Met. Forming OAJ FMT 3, 50-61 (2017) [Google Scholar]
  22. T. Okumura: Inductively Coupled Plasma Sources and Applications, Hindawi Publishing Corporation Physics Research International, Vol. 2010, (2010) [Google Scholar]
  23. S. M. Jatta, Plasmaunterstütze Abscheidung von dielektischen Schichten zur Entwicklung von mikromechanisch abstimmbaren optischen Komponenten. Dissertation, TU Darmstadt, (2010) [Google Scholar]
  24. H. Hasselbruch, A. Mehner, H.-W. Zoch: Influence of plasma nitriding parameters and subsequent surface finishing on the adhesion strength of tungsten doped PVD a-C:H coatings. Proceedings of the 13th International Conference of THE“A” Coatings, Greece, 169-179 (2017) [Google Scholar]
  25. W. M. Sigmund, SH. Hsu: Cassie-Baxter Model. in Encyclopedia of Membranes, Springer, Berlin, (2016) [Google Scholar]
  26. C. Wörz, G. Reichardt, M. Liewald, E. Zahedi, R. Weber, T. Graf : Dry deep drawing of a rectangular cup assisted by volatile media injected from laser-drilles mircoholes. Dry Met. Forming OAJ FMT 5, (2018) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.