Open Access
MATEC Web Conf.
Volume 190, 2018
5th International Conference on New Forming Technology (ICNFT 2018)
Article Number 14009
Number of page(s) 6
Section Dry metal forming, Special session SPP 1676
Published online 18 September 2018
  1. N. Bay, A. Azushima, P. Groche, I. Ishibashi, M. Merklein, M. Morishita, T. Nakamura, S. Schmid, M. Yoshida: Environmentally benign tribo-systems for metal forming. In: Annals of the CIRP 59/2 (2010) 760-780 [Google Scholar]
  2. F. Vollertsen, F. Schmidt: Dry Metal Forming: Definition, Chances and Challenges. In: Int. J. Precision Engineering and Manufacturing–Green Technology 1/1 (2014) 59-62 [CrossRef] [Google Scholar]
  3. Vollertsen, F. and Schmidt, F. (2014). Dry metal forming: Definition, Chances and Challenges. Int J Precis Eng Man - Green Technology 1(1):59-62 [Google Scholar]
  4. K. Muller (2003) Praktische Oberflachentechnik– Vorbehandeln– beschichten– Beschichtungsfehler– Umweltschutz; JOT Fachbuch [CrossRef] [Google Scholar]
  5. M. Teller, M. Bambach, G. Hirt: A compression-torsion-wear-test achieving contact pressures of up to eight timest he initial flow stress of soft aluminium. In: CIRP Annals– Manufacturing Technology 64 (2015) 280-292 [Google Scholar]
  6. M. Teller, M. Bambach, G. Hirt, I. Ross, A. Temmler, R. Poprawe, H. Bolvardi, S. Prunte, J. M. Schneider: Investigation of the suitability of surface treatments for dry cold extrusion process-oriented tribological testing. In: Key Engineering Materials Vols. 651-653 (2015) 473-479 [CrossRef] [Google Scholar]
  7. M. Murakawa, N. Koga, T. Kumagai: Deep-drawing of aluminum sheets without lubricant by use of diamond-like carbon coated dies. Surf Coat Tech 76 (1995) 553–558 [CrossRef] [Google Scholar]
  8. M. Murakawa, S. Takeuchi: Evaluation of tribological properties of DLC films used in sheet forming of aluminum sheet. Surf Coat Tech 163 (2003) 561–565. [CrossRef] [Google Scholar]
  9. K. Osakada R. Matsumoto: Fundamental Study of Dry Metal Forming with Coated Tools. CIRP Ann. Manuf. Technol 49/1 (2000) 161–164. [Google Scholar]
  10. S. Kataoka, A. Motoi. Improvement in DLC thin film adhesion and its application to dry deep drawing. J. Jpn. Soc. Technol. Plast 46/532 (2005) 412–416. [Google Scholar]
  11. K. Tamaoki, S. Kataoka: Study of deep drawing using diamond coated tools. Journal of Material Testing Research Assoc. of Japan 53/4 (2008) 247–253. [Google Scholar]
  12. K. Tamaoki, S. Kataoka, K. Minamoto: Dry deep-drawing with use of electroconductive ceramic tools. Proc. Int. Conf. Trib. Manuf. Pro (2007) 175–179. [Google Scholar]
  13. Z. G. Wang, S. Komiyama, Y. Yoshikawa, T. Suzuki, K. Osakada (2015) Evauluation of lubricants without zinc phosphate precoat in multi-stage cold forging, In: CIRP Annals– Manufacturing Technology 64 [Google Scholar]
  14. P. Groche, J. Stahlmann, J. Hartel, M. Kohler (2009) Hydrodynamic effects of macroscopic deterministic surface structures in cold forging processes, In: Tribology International 42 [Google Scholar]
  15. Klocke, F., Trauth, D., Schongen F. and Shirobokov, A. (2014). "Analysis of friction between stainless steel sheets and machined hammer peened structured tool surfaces." Prod. Eng. Res. Devel. 8: 263-272. [CrossRef] [Google Scholar]
  16. Bobzin, K., Brogelmann, T., Basturk, S., Klocke, F., Mattfeld, P., Trauth, D. (2015). "Development of an insitu Plasma Treatment of X155CrMoV12 for a (Cr,Al)N PVD Tool Coating for Dry Metal Forming in Cold Forging." Dry Metal Forming Open Access Journal 1(1): 57-62. [Google Scholar]
  17. Bobzin, K., Brogelmann, N.C., Basturk, S., Klocke, F., Mattfeld, P., Trauth, D. (2015). "Tribological Behavior of (Cr1-xAlx)N/WSy PVD Tool Coatings for the Application in Dry Cold Forging of Steel." Dry Metal Forming Open Access Journal (1)1:152-158. [Google Scholar]
  18. Trauth, D.; Hild, R.; Mattfeld, P.; Basturk, S.; Brogelmann, T.; Bobzin, K.; Klocke, F.: Advances in dry metal forming of low alloyed steels for cold forging using a (Cr,Al)N tool coating and surface structures on workpieces. In: Proceedings of the 12th International Conference THe „A“ coatings in Manufacturing Engineering, Hannover, Germany, March 31st - April 1st (2016) [Google Scholar]
  19. Bobzin, K., Kruppe, N.C., Arghavani, M, Hoffmann, D.C., Klocke, F., Mattfeld, P., Trauth, D., Hild R. (2017). "Mechanical and tribological characterization of self-lubricating (Cr1-xAlx)N coatings for deposition on complex-shaped forging toolsMechanical and tribological characterization of self-lubricating (Cr1-xAlx)N coatings for deposition on complex-shaped forging tools." Dry Metal Forming Open Access Journal (3) 81-89. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.