EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 190 (2018) MATEC Web Conf., 190 (2018) 14002 References
Open Access
Issue
MATEC Web Conf.
Volume 190, 2018
5th International Conference on New Forming Technology (ICNFT 2018)
Article Number 14002
Number of page(s) 10
Section Dry metal forming, Special session SPP 1676
DOI https://doi.org/10.1051/matecconf/201819014002
Published online 18 September 2018
  1. F. Vollertsen, F. Schmidt, IJPEM-GT, 1, 1 (2014) [Google Scholar]
  2. A. Ghiotti, S. Bruschi, Wear, 271, 9–10 (2011) [CrossRef] [Google Scholar]
  3. V. Weihnacht, A. Brückner, S. Bräunling, VIP, 20, 3 (2008) [CrossRef] [Google Scholar]
  4. M. Merklein, M. Schmidt, S. Tremmel, K. Andreas, T. Häfner, R. Zhao, J. Steiner, OAJ FMT, 3, pp. 42–56 (2015) [Google Scholar]
  5. J. Vetter, Surf. Coat. Technol., 257, pp. 213–240, (2014) [Google Scholar]
  6. J. Steiner, K. Andreas, M. Merklein, Ashmet (Eds.) Proc. Int. Deep Drawing Research Group Conf., pp. 679–688 (2016) [Google Scholar]
  7. A. Birkert, S. Haage, M. Staub, Umformtechnische Herstellung komplexer Karosserieteile, Springer (2013) [Google Scholar]
  8. E. Romhanji, M. Popović, D. Glišić, M. Stefanović, M. Milovanović, Metallurgija, 10, pp. 205–216 (2004) [Google Scholar]
  9. J. Steiner, K. Andreas, M. Merklein, IOP Conf. Ser. Mater. Sci. Eng., 159, 1 (2016) [CrossRef] [Google Scholar]
  10. Association of German Engineers (VDI), VDI Guideline 2840, Beuth (2012) [Google Scholar]
  11. Y. Lifshitz, G. D. Lempert, E. Grossman, Phys. Rev. Lett., 72, 17 (1994) [CrossRef] [Google Scholar]
  12. J. C. Sánchez-López, A. Fernández, Tribology of Diamond-Like Carbon Films, C. Donnet, A. Erdemir (Eds.), Springer (2008) [Google Scholar]
  13. German Institute for Standardization (DIN): DIN EN ISO 26423. Beuth (2016) [Google Scholar]
  14. Association of German Engineers (VDI), VDI Guideline 3198, Beuth (1992) [Google Scholar]
  15. German Institute for Standardization (DIN), DIN EN ISO 14577, Beuth (2003) [Google Scholar]
  16. B. Podgornik, J. Jerina, Surf. Coatings Technol., 206, 11–12, pp. 2792–2800 (2012) [CrossRef] [Google Scholar]
  17. J. Tenner, T, Häfner, B. Rothammer, K. Krachenfels, R. Zhao, M. Schmidt, S. Tremmel, M. Merklein, OAJ FMT, 4, pp. 35–46 (2018) [Google Scholar]
  18. A.C. Ferrari, J. Robertson, Phil. Trans. R. Soc. Lond. A, 362, pp. 2477–2512 (2004) [NASA ADS] [CrossRef] [Google Scholar]
  19. S. Prawer, K.W. Nugent, Y. Lifshitz, G.D. Lempert, E. Grossman, J. Kulik, I. Avigal, R. Kalish, Diamond Relat. Mater., 5, pp. 433–438 (1996) [CrossRef] [Google Scholar]
  20. German Institute for Standardization (DIN): DIN EN ISO 25178, Beuth (2011) [Google Scholar]
  21. D.A. del Cerro, Dissertation, Mechanical Automation, University of Twente, Enschede (2014) [Google Scholar]
  22. L. M. Machado, R. E. Samad, W. de Rossi, and N. D. Vieira Junior, Opt. Expr., 20, pp.4114–4123 (2012) [CrossRef] [Google Scholar]
  23. S. Nolte, C. Momma, A. Jacobs, A. Tünnermann, B.N. Chichkov, B. Welleghausen, N. Welling, J. Opt. Soc. Am. B, 14, 10, pp. 2716–2722 (1997) [CrossRef] [Google Scholar]
  24. J.M. Liu, Opt. Lett., 7, pp. 196–198 (1982) [CrossRef] [PubMed] [Google Scholar]
  25. T. Häfner, J. Heberle, M. Dobler, M. Schmidt, J. Laser Appl., 28, pp. 0226051–0226056 (2016) [CrossRef] [Google Scholar]
  26. Y. Jee, M.F. Becker, R.M. Walser, J. Opt. Soc. Am. B, 5, pp. 648–659 (1988) [CrossRef] [Google Scholar]
  27. A. Naghilou, O. Armbruster, W. Kautek, Appl. Surf. Sci., 418, pp. 487–490 (2017) [CrossRef] [Google Scholar]
  28. J. Bonse, S. Höhm, S.V. Kirner, A. Rosenfeld, J. Krüger, IEEE J. Sel. Top. Quantum Electron., 23, pp. 1–15 (2017) [CrossRef] [Google Scholar]
  29. R. Zhao, S. Tremmel, Tewiss (Eds.) Proceedings of THE «A» Coatings 2016, IFW 3, pp. 193–200 (2016) [Google Scholar]
  30. C. Zhang, M. Fujii, J. Surf. Eng. Mater. Tech., 5, pp. 110–123 (2015) [Google Scholar]
  31. T. Häfner, J. Strauß, C. Roider, J. Heberle, M. Schmidt, Appl. Phys. A, 124:111 (2018) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.