Open Access
MATEC Web Conf.
Volume 190, 2018
5th International Conference on New Forming Technology (ICNFT 2018)
Article Number 15010
Number of page(s) 8
Section Micro cold forming, Special session SFB 747
Published online 18 September 2018
  1. M. Geiger, F. Vollertsen, R. Kals, CIRP Annals 45(1), 277-282 (1996) [CrossRef] [Google Scholar]
  2. M. Geiger, M. Kleiner, R. Eckstein, N. Tiesler, U. Engel, CIRP Annals 50(2), 445-462 (2001) [CrossRef] [Google Scholar]
  3. E. Brinksmeier, A. Schulz, micro metal forming (Springer Verlag), 204-223 (2013) [Google Scholar]
  4. F. Vollertsen, D. Biermann, H.N. Hansen, I.S. Jawahir, K. Kuzman, CIRP Annals 58(2), 566-587 (2009) [CrossRef] [Google Scholar]
  5. D. Dornfeld, S. Min, Y. Takeuchi, CIRP Annals 55(2), 745-768 (2006) [CrossRef] [Google Scholar]
  6. M.A. Câmara, J.C. Campos Rubio, A.M. Abrão, J.P. Davim, J. Mat. Sci. & Tech. 28(8), 673-685 (2012) [CrossRef] [Google Scholar]
  7. M. Manjaiah, S. Narendranath, S. Basavarajappa, Trans. Nonferrous Met. Soc. China 24(1), 12- 21(2014) [CrossRef] [Google Scholar]
  8. M. Weikert, C. Fohl, F. Dausinger, T. Abeln, SPIE 5063, 208-213 (2003) [Google Scholar]
  9. R.J Leese, A. Ivanov, Adv. Mech. Eng. 8(1), 1-13 (2016) [Google Scholar]
  10. A. Stephen, T. Lilienkamp, S. Metev, G. Sepold, Proc. 1st Int. Conf. EUSPEN (Shaker Verlag), 20-23 (1999) [Google Scholar]
  11. D. Bäuerle, Laser Processing and Chemistry. (Springer Verlag) (2011) [CrossRef] [Google Scholar]
  12. A. Stephen, F. Vollertsen, CIRP Annals 59(1), 251- 254 (2010) [CrossRef] [Google Scholar]
  13. H. Messaoudi, O. Hauser A. Matson, S. Mehrafsun, F. Vollertsen, Proc. 8th. Kolloquium Mikroproduktion, 171-178 (2017) [Google Scholar]
  14. P. Zhang, A. von Freyberg, A. Fischer, Int. J. Adv. Manuf. Tech. 93, 3693-3703 (2017) [CrossRef] [Google Scholar]
  15. S. Eckert, A. Köhnsen, F. Vollertsen, Proc. Laser in Manufacturing Conference (LIM), 1-8 (2017) [Google Scholar]
  16. E. Brinksmeier, F. Vollertsen, O. Riemer, H. Flosky, G. Behrens, F. Böhmermann, Proc. 6th. Kolloquium Mikroproduktion, 1-8 (2013) [Google Scholar]
  17. K. Lübke, Z. Sun, G. Goch, XXIIII. Messtechnisches Symposium des Arbeitskreises der Hochschullehrer für Messtechnik eV (AHMT), 70-90 (2010). [Google Scholar]
  18. K. Lübke, Z. Sun, G. Goch, CIRP Annals 61(1), 499-502 (2012) [CrossRef] [Google Scholar]
  19. A. Aramcharoen, P.T. Mativenga, Precision Engineering 33, 402-407(2009) [CrossRef] [Google Scholar]
  20. H.K. Tönshoff, H.-G. Wobker, D. Brandt, Härterei-Technische Mitteilungen-HTM 50(3), 176-181 (1995) [Google Scholar]
  21. O. Hauser, S. Mehrafsun, F. Vollertsen, 7th Kolloquium Mikroproduktion, 8-14 (2015) [Google Scholar]
  22. F. Klocke, S. Harst, F. Karges, M. Zeis, A. Klink, CIRP Conference on Modelling of Machining Operations 58, 169-174 (2017) [Google Scholar]
  23. S. Eckert, A. Köhnsen, F. Vollertsen, Proceedings of Laser in Manufacturing Conference (LIM), 1-8 (2017) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.