Open Access
| Issue |
MATEC Web Conf.
Volume 190, 2018
5th International Conference on New Forming Technology (ICNFT 2018)
|
|
|---|---|---|
| Article Number | 10005 | |
| Number of page(s) | 6 | |
| Section | Micro forming | |
| DOI | https://doi.org/10.1051/matecconf/201819010005 | |
| Published online | 18 September 2018 | |
- A. E. Gubera, M. Heckele, D. Herrmanna, A. Muslija, V. Saile, L. Eichhornb, T. Gietzelt, W. Hoffmann, P. C. Hauser, J. Tanyanyiwa, A. Gerlach, N. Gottschlich, G. Knebel, Chem. Eng. J. 101, Issues 1-3, 447-453 (2004) [CrossRef] [Google Scholar]
- Y. Qin, J. Zhao, G. Anyasodor, K. S. Hansen, I. Calderon, K. Konrad, C. Hartl, M. Arentoft, I. S. Chronakis, Micro-Manufacturing Engineering and Technology. 2nd ed. Oxford, 179-200 (2015) [Google Scholar]
- J. Zhao, Y. Qin, A. Razali, A. L. K. Yip, Z. Fei, 7th International Conference on Micromanufacturing, 534-541 (2012) [Google Scholar]
- J. Zhao, A. L. K. Yip, Y. Qin, A. Razali, Z. Fei. Trans. Nonferrous Met. Soc. China. 22, Supplement 2, s214-s221 (2012) [CrossRef] [Google Scholar]
- M. Worgull, Hot Embossing:Theory and Technology of Microreplication, 1st ed, Elsevier (2009) [Google Scholar]
- M. Heckele, W. K, Schomburg. J. Micromech. Microeng. 14, Issue 3, R1-R14 (2004) [Google Scholar]
- L. Lin, Y. T. Cheng, C. J. Chiu, Microsyst Technol, 4, 113-116 (1998) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.