EDPS Account

Volume 244 (2018)

Free Access to the whole issue

MATEC Web of Conferences

Volume 244 (2018)

Innovative Technologies in Engineering Production (ITEP’18)

Bojnice, Slovak Republic, September 11-13, 2018
D. Stančeková, M. Vaško, A. Rudawska, N. Čuboňová, A. Sapietová, J. Mrázik, J. Szabelski and V. Tlach (Eds.)

Export the citation of the selected articles Export
Select all

Open Access

Statement of Peer review

Published online: 05 December 2018

PDF (811 KB)

Open Access

About the conference

Published online: 05 December 2018

PDF (1.21 MB)

Progressives Technologies

Open Access

Hydrodynamics features in cavitation devices under tangent medium input 01001

Tetiana Vitenko, Paweł Droździel and Nazar Horodyskyi

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824401001

Open Access

Welding materials used to increase service life of agricultural machinery processing soil 01002

Petr Hrabě, Viktor Kolář, Abraham Kabutey and Aleš Sedláček

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824401002

Open Access

Determination of the force required for the hydroforming of al 99,5 01003

Vasile Ceclan and Sorin Grozav

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824401003

Open Access

Analysis of the properties of bone cement with respect to its manufacturing and typical service lifetime conditions 01004

Robert Karpinski, Jakub Szabelski and Jacek Maksymiuk

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824401004

Open Access

Optimization and design of the vulcanization press sandwich pressure plate parameters 01005

Milan Vaško, Marián Handrik, Peter Kopas and Bohuš Leitner

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824401005

Open Access

The importance of proper evidence and identification of metallurgical materials for effective management of the company 01006

Vladimíra Schindlerová and Ivana Šajdlerová

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824401006

Open Access

The strength of traditional and self-pierced riveted joints 01007

Anna Rudawska, Izabela Miturska, Dana Stančeková and Jacek Mucha

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824401007

Open Access

Stiffness of 316L stainless steel support structures proposed for the SLM process 01008

Jiří Hajnyš, Marek Pagáč, Tomáš Zlámal, Jana Petrů and Lukáš Kousal

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824401008

Open Access

Comparison of the mechanical properties and microstructural evolution in the HAZ of HSLA DOMEX 700MC welded by gas metal arc welding and electron beam welding 01009

Peter Kopas, Milan Sága, Michal Jambor, František Nový, Libor Trško and Lenka Jakubovičová

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824401009

Open Access

Dynamic simulation for optimisation solution of manufacturing processes 01010

Vladimíra Schindlerová, Ivana Šajdlerová and Dominika Lehocká

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824401010

Open Access

Static analysis of transmission tower beam structure 01011

Lenka Jakubovičová, Alžbeta Sapietová and Jan Moravec

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824401011

Open Access

Problems of blackening of steel parts in technical practice 01012

Sylvia Kuśmierczak and Martin Makovský

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824401012

Open Access

Possibilities of using interlayers during diffusion welding of Ti Gr2 and AISI 316L 01013

Jaromir Moravec, Iva Novakova and Tomasz Kik

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824401013

Open Access

The contribution to the modal analysis of the control system 01014

Alžbeta Sapietová, Filip Chovanculiak, Vladimír Dekýš and Lukáš Gajdoš

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824401014

Open Access

Measurement of industrial robot pose repeatability 01015

Ivan Kuric, Vladimír Tlach, Zuzana Ságová, Miroslav Císar and Igor Gritsuk

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824401015

Open Access

Comparation of nonuniform and uniform Monte - Carlo Searching 01016

Marián Handrik, Jana Handriková, Milan Vaško and Filip Dorčiak

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824401016

Open Access

Application possibilities of the low-temperature repairs on creep-resistance turbine components from material GX23CrMoV12-1 01017

Jaromir Moravec, Iva Novakova, Jiri Sobotka and Tomasz Kik

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824401017

Open Access

Nanocomposite coatings in polymeric matrices and their effect on friction coefficient 01018

Jan Novotný, Irena Lysoňková and Milan Sapieta

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824401018

Open Access

Effect of incorrect mix ratio on strength of two component adhesive Butt-Joints tested at elevated temperature 01019

Jakub Szabelski

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824401019

Open Access

Capabilities of processing and visualization of production facilities diagnostic data 01020

Matej Kandera, Miroslav Císar and Ivan Zajačko

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824401020

Open Access

Influence of roller - burnishing on surface roughness parameters and roundness 01021

Augustín Görög, Ingrid Görögová, Dana Stančeková and Miroslav Janota

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824401021

Open Access

Innovation of hardness tester mechanism and its functionality test 01022

František Bárnik, Milan Sága and Ondrej Štalmach

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824401022

Open Access

Static structural analysis of rolling ball bearing 01023

Peter Šulka, Alžbeta Sapietová, Vladimír Dekýš and Milan Sapieta

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824401023

Open Access

Analysis of roughness profile on curved surfaces 01024

Mário Drbúl, Pavol Martikáň, Jozef Bronček, Ivan Litvaj and Jaroslava Svobodová

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824401024

Open Access

The mould for production of plastic spout cap with internal thread by injection moulding 01025

Vladimír Bulej, Nadežda Čuboňová, Manfred Eberth and Karol Vasilko

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824401025

Open Access

Contribution to the determination of the thermal emissivity of the composite material using longwave infrared camera 01026

Ondrej Stalmach, Vladimir Dekys, Frantisek Barnik and Jan Simon

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824401026

Open Access

Application of artificial intelligence principles in mechanical engineering 01027

Ivan Zajačko, Tomáš Gál, Zuzana Ságová, Vasyl Mateichyk and Dariusz Wiecek

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824401027

Open Access

Possibilities of applying motif group parameters for description roughness of turned surfaces 01028

Maciej Kowalski, Magdalena Wiśniewska, Paweł Karolczak and Jozef Holubjak

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824401028

Development Trends in Machining Technology

Open Access

Research on water jet cutting of composites based on epoxy/microparticles from coconut shell 02001

Miroslav Müller, Petr Valášek, Miloslav Linda and Viktor Kolář

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824402001

Open Access

Non homogeneity of surface integrity after hard milling of high tempered bearing steel 02002

Mária Čilliková, Miroslav Neslušan, Anna Mičietová and Juraj Uríček

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824402002

Open Access

Influence of Ca, Sb and heat treatment on AlSi9CuMnNi alloy in frame of their properties from view of machining 02003

Nataša Náprstková, Pavel Kraus, Jan Sviantek and Tuong Nguyen Van

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824402003

Open Access

Optimization of machining processes preparation with usage of Strategy Manager 02004

Tomáš Dodok, Nadežda Čuboňová and Dorota Wiecek

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824402004

Open Access

The effect of chip former on power loading of recessing tool 02005

Jiří Kratochvíl, Marek Sadílek and Jozef Mrazik

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824402005

Open Access

Impact study of single stage and multi stage abrasive machining on static strength of lap adhesive joints of mild steel 02006

Anna Rudawska and Izabela Miturska

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824402006

Open Access

Use of high-speed water flows for accelerated mechanical modelling of erosive wear of concrete surfaces 02007

Libor Sitek, Petr Hlaváček and Lenka Bodnárová

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824402007

Open Access

Comparative study of flank wear, tool life and type of chips for two similar turning inserts from different producers 02008

Karel Šramhauser, Nataša Náprstková, Pavel Kraus and Martin Marek

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824402008

Open Access

The evaluation of the surface quality after laser cutting 02009

Tomáš Zlámal, Šárka Malotová, Jana Petrů, Zbigniew Brytan and Václav Musil

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824402009

Open Access

Studies of thin-walled parts deformation by gripping force during turning process on an example of bearing ring 02010

Adam Patalas, Michał Regus and Katarzyna Peta

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824402010

New Trends in Vehicle Technology - Automotive Engineering

Open Access

Simulation of spark ignition engine performance working on biogas hydrogen mixture 03001

Donatas Kriaučiūnas, Saugirdas Pukalskas and Alfredas Rimkus

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824403001

Open Access

Application of the methodology related to the emission standard to specific railway line in comparison with parallel road transport: a case study 03002

Iwona Rybicka, Ondrej Stopka, Vladimír Ľupták, Mária Chovancová and Paweł Droździel

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824403002

Open Access

The peculiarities of monitoring road vehicle performance and environmental impact 03003

Ivan Kuric, Vasyl Mateichyk, Miroslaw Smieszek, Mykola Tsiuman, Nataliia Goridko and Igor Gritsuk

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824403003

Open Access

Engine with unconventional crank mechanism FIK₁ 03004

Pavol Kukuča, Dalibor Barta, Robert Labuda and Tsvetomir Gechev

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824403004

Open Access

Analysis of the market of electric tractors in agricultural production 03005

Jacek Caban, Jan Vrabel, Branislav Šarkan, Janusz Zarajczyk and Andrzej Marczuk

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824403005

Open Access

Piston kinematics of a combustion engine with unconventional crank mechanism 03006

Pavol Kukuča, Dalibor Barta, Ján Dižo and Jacek Caban

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824403006

Open Access

Non-destructive testing of automotive heat exchangers 03007

Katarzyna Peta, Jan Żurek and Adam Patalas

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824403007