Open Access
Issue
MATEC Web Conf.
Volume 244, 2018
Innovative Technologies in Engineering Production (ITEP’18)
Article Number 01025
Number of page(s) 10
Section Progressives Technologies
DOI https://doi.org/10.1051/matecconf/201824401025
Published online 05 December 2018
  1. D.E. Dimla, M. Camilotto, et al., Design and optimization of conformal cooling channels in injection moulding tools. J. of Mat. Proc. T. 164-165, p. 1294-1300 (2005) [CrossRef] [Google Scholar]
  2. S. Marques, A. Fagali de Souza, M. Jackson, I. Yadroitsau, Design of conformal cooling for plastic injection moulding by heat transfer simulation. Polímeros, 25(6), 564-574 (2015) [CrossRef] [Google Scholar]
  3. D. Homar, et al., Cooling simulation of conformal cooling injection mould insert produced by hybrid manufacturing. Technological Gazette, 24(4), p. 981-986 (2017) [Google Scholar]
  4. N. Čuboňová, Utilization of genetic alghoritms by the tool path programming. Ann. of DAAAM and Proc. of the Int. DAAAM Symp., 63-64, (2011) [Google Scholar]
  5. J.Wang, D. Chen, S. Wang, et al., Insert injection molding of low-density polyethylene single-polymer composites reinforced with ultrahighmolecular-weight polyethylene fabric. J. of Thermopl. Compos. Mat., 31(8), 1013-1028 (2018) [CrossRef] [Google Scholar]
  6. S. Teklehaimanot, Simulation and Design of a plastic injection Mold. (University of Applied Sciences ARCADA, Finland [Degree Thesis], 2011) [Google Scholar]
  7. D. Stančeková, R. Kameník, A. Sapietová, J. Pilc, T. Zlámal, J. Cais, Comparison of properties of steel 100Cr6 and C56E2 in the process of machining. METAL 2017: 26th Int. Conf. on Met. and Mat. p. 819-825, (2017) [Google Scholar]
  8. J. Korzekwa, et al., Electromechanical properties of PLZT x/90/10. Eu. Phys. J: Spec. Top. 154(1), p. 127-130 (2008) DOI: 10.1140/epjst/e2008-00530-5 [CrossRef] [Google Scholar]
  9. A. Rengevič, M. Fúra, N. Čuboňová, Analysis of printing parameters for production of components with Easy3DMaker printer. Adv. in Sci. and Techn.-Res. J. 10(32), p.1-8, (2016), DOI: 10.12913/22998624/65114 [CrossRef] [Google Scholar]
  10. A. Rudawska, P. Pawlak, I. Miturska, D. Stančeková, M. Chyra, Comparative analysis of welded and adhesive joints strength made of acid-resistant stainless steel sheets. Adv. in Sci. and Techn.-Res. J. 11(4), p. 97-102 (2017), DOI: 10.12913/22998624/78165 [CrossRef] [Google Scholar]
  11. M. Bruna, A. Sládek, Hot tearing evaluation of al - based alloys. Man. Techn. 16(2), p. 323-327, 2016 [Google Scholar]
  12. D. Stančeková, A. Czán, M. Derbas, Investigation of defects in forging tools by nondestructive detection method. Metal 2013: 22nd Int. Conf. on Metal. and Mat. P. 485-490, (2013) [Google Scholar]
  13. M. Skalicky, Mechanical Design of Mould for Plastic Component Produced by Injection Moulding Technology. (University of Žilina, Žilina [Master thesis], 2014) [Google Scholar]
  14. Engel Austria GmbH, ENGEL victory - Machine system with freedom to move. Available on: https://www.engelglobal.com/en/at/solutions/injection-moulding-machines/victory.html [Google Scholar]
  15. J. Stanček, V. Bulej, Design of driving system for scissor lifting mechanism. Acad. J. of Man. Eng. 13(4) p. 38-43, (2015). [Google Scholar]
  16. Hasco, Z1500 Product info. Available on https://www.hasco.com/hasco/en/Productcatalogue/Z/Demoulding/Gear-products/Transmission-elements/Z1500-d1xp1-Ll2/p/Z1500_d1xp1_L_l2. [Google Scholar]
  17. M. Jančušová, Moulds for processing of plastics (in Slovak). (University of Žilina, Žilina, 2010) [Google Scholar]
  18. Z. Tůma, R. Knoflíček, J. Tůma, F. Bradáč, P. Blecha, The Process Simulation Using by Virtual Reality. Procedia Eng. 69, (2014), DOI: 10.1016/j.proeng.2014.03.084 [Google Scholar]
  19. Š. Václav, J. Jurko, Š. Lecký, Allowance treatment static designed couple and repeatable precision in assembly. MATEC Web of Conferences 137, Art. No. 04007 (2017) DOI:10.1051/matecconf/201713704007 [Google Scholar]
  20. V. Bulej, et al., Study of the Workspace of Hybrid Mechanism Trivariant. App. Mech. a. Mat. 436, p 366-373 (2013), DOI: 10.4028/www.scientific.net/AMM.436.366 [CrossRef] [Google Scholar]
  21. J. Lipina, V. Krys, R. Pastor, Increasing the Load Capacity of Screw Connections in Parts Produced by the Rapid Prototyping Method. INES 2016 - 20th IEEE Int. Conf. on Int. Eng. Sys. 147-150 (2016) [Google Scholar]
  22. M. Kelemen, T. Kelemenova, I. Virgala, Rapid Control Prototyping of Embedded Systems Based on Microcontroller. Modelling of Mech. and Mechat. S. 96, p. 215-220 (2014), DOI: 10.1016/j.proeng.2014.12.146 [Google Scholar]
  23. M. Staněk, D. Maňas, M. Maňas, J. Javorík, Simulation of injection molding process. Proc. of the 13th WSEAS Int. Conf. on Aut. Con., Mod. & Sim. p. 231-234 (2015) [Google Scholar]
  24. F. Dupret, A. Couniot, et al., Modelling and simulation of injection molding. Rheology Series, 8, p. 939-1010 (1999), DOI: 10.1016/S0169-3107(99)80012-4 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.