Open Access
| Issue |
MATEC Web Conf.
Volume 244, 2018
Innovative Technologies in Engineering Production (ITEP’18)
|
|
|---|---|---|
| Article Number | 01021 | |
| Number of page(s) | 9 | |
| Section | Progressives Technologies | |
| DOI | https://doi.org/10.1051/matecconf/201824401021 | |
| Published online | 05 December 2018 | |
- P. R. Babu, T. S. Prasad, A.V.S. Raju, A. Jawahar Babu, Effect of internal roller burnishing on surface roughness and surface hardness of mild steel, Journal of Scientific & Industrial Research 68, 29-31 (2009) [Google Scholar]
- S. Dolinšek, J. Kopač, Mechanisms and types of tool Wear; particularities in advanced cutting materials, Journal of Achievements in Materials and Manufacturing Engineering 19, 11-18 (2006) [Google Scholar]
- A. Stoić, I. Lacković, J.Kopač, I. Samardžić, D. Kozak, An investigation of machining efficiency of internal roller burnishing. Journal of Achievements in Materials and Manufacturing Engineering 40, 188-194 (2010) [Google Scholar]
- B. B. Buldum, S. C. Cagan, The optimization of surface roughness of az91d magnesium alloy using ANOVA in ball burnishing process. Turkish Journal of Engineering 1, 25-31 (2017) [CrossRef] [Google Scholar]
- A. Kułakowska, L. Kukielka, K. Kukielka, R. Patyk, L. Malag, L. Bohdal, Possibility of Steering of Product Surface Layers Properties in Burnishing Rolling Process. Applied Mechanics and Materials 474, 442-447 (2014) [Google Scholar]
- L. Malag, L. Kukielka, K. Kukielka, A. Kułakowska, L. Bohdal, R. Patyk, Problems Determining of the Mechanical Properties of Metallic Materials from the Tensile Test in the Aspect of Numerical Calculations of the Technological Processes. Applied Mechanics and Materials 474, 454-459 (2014) [Google Scholar]
- S. P. Dwivedi, S. Sharma, R. K. Mishra, Effects of roller burnishing process parameters on surface roughness of A356/5%SiC composite using response surface methodology. Advances in Manufacturing 2, 303-317 (2014) [CrossRef] [Google Scholar]
- F. Gharbi, S. Sghaier, H. Hamdi, T. Benameur, Ductility improvement of aluminum 1050A rolled sheet by a newly designed ball burnishing tool device. International Journal of Advanced Manufacturing Technology 60, 87-99 (2012) [Google Scholar]
- R. J. Kosarevych, B. P. Rusyn and R. V. Torska, Modelling of the Propagation of Pitting Corrosion by Point Processes, Materials Science 51, 673-681 (2016) [CrossRef] [Google Scholar]
- B. P. Rusyn, N. P. Anufrieva, N. R. Hrabovska, V. H. Ivanyuk, Nondestructive Testing of the State of Surfaces Damaged by Corrosion Pitting. Materials Science 49, 516-524 (2014) [Google Scholar]
- L. N. López de Lacalle, A. Lamikiz, J. A. Sánchez, J. L. Arana, The effect of ball burnishing on heat-treated steel and Inconel 718 milled surfaces. International Journal of Advanced Manufacturing Technology 32, 958-968 (2007) [Google Scholar]
- M. H. El-Axir, An investigation into roller burnishing. International Journal of Machine Tools and Manufacture 40, 1603-1617 (2000) [Google Scholar]
- H. Luo, J. Liu, L. Wang, Q. Wang, The effect of burnishing parameters on burnishing force and surface microhardness. International Journal of Advanced Manufacturing Technology 28, 707-713 (2006) [Google Scholar]
- V. Franzen, M. Trompeter, A. Brosius, A. E. Tekkaya, Finishing of Thermally Sprayed Tool Coatings for Sheet Metal Forming Operations by Roller Burnishing. International Journal of Material Forming 3, 147-150 (2010) [Google Scholar]
- Dodok, T., Čuboňová, N., Kuric, I. Workshop Programming as a Part of Technological Preparation of Production. Advances in science and technology. Research Journal, 11(1), 2017, 111-116 [CrossRef] [Google Scholar]
- M. Sapieta, A. Sapietová, V. Dekýš, Comparison of the thermoelastic phenomenon expressions in stainless steels during cyckic loading. Metalurgija 56, Issue: 1-2, 203-206 (2017) [Google Scholar]
- N. S. M. El-Tayeb, K. O. Low, P. V. J. Brevern Influence of roller burnishing contact width and burnishing orientation on surface quality and tribological behaviour of Aluminium 6061. Journal of Materials Processing Technology 186, 272-278 (2007) [Google Scholar]
- J. Petru, T. Zlamal, R. Čep, D Stančeková, M. Pagač, O. Vortel, Mechanism of cutting insert wear and their influence on cutting ability of the tool during machining of special alloys. METMG 2015 - 3rd international conference, Vancouver, Canada, 36-40 (2015) [Google Scholar]
- J. Novotný, J. Cais, N. Náprstková, Analysis of aluminium alloys AlSi7Mg0.3 and AlMg3 by means of X-Ray Diffraction. Manufacturing Technology, Vol. 14, No. 3, 392-397 (2014) [Google Scholar]
- M. Drbul, A. Czan, M. Sajgalik, M. Piesova, K. Stepien, Influence of normal vectors on the accuracy of product’s geometrical specification. Conference: 12th International Scientific Conference of Young Scientists on Sustainable, Modern and Safe Transport Location: High Tatras. Procedia Engineering, Vol.192, 119-123 (2017) [Google Scholar]
- R. J. N. Malleswara, K. R. A. Chenna, R. P. V. Rama, The effect of roller burnishing on surface hardness and surface roughness on mild steel specimens. International Journal of Applied Engineering Research 1, 777 (2011) [Google Scholar]
- M. Kowalski, P. Karolczak A. Stadniczenko, Applicability of wavelet analysis in evaluation of roughness and waviness profiles of turned surfaces. Technological Engineering, Iss. 7, vol. 2, 66-69 (2010) [Google Scholar]
- V. Poppeova, V. Bulej, R. Zahoransky, J. Uricek, Parallel mechanism and its application in design of machine tool with numerical control. Applied Mechanics and Materials, Vol. 282, 74-79 (2013) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.