EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 244 (2018) MATEC Web Conf., 244 (2018) 01005 References
Open Access
Issue
MATEC Web Conf.
Volume 244, 2018
Innovative Technologies in Engineering Production (ITEP’18)
Article Number 01005
Number of page(s) 10
Section Progressives Technologies
DOI https://doi.org/10.1051/matecconf/201824401005
Published online 05 December 2018
  1. K. J. Bathe, Finite Element Procedures. (Prentice Hall, New Jersey, 1982) [Google Scholar]
  2. L. Jakubovičová, M. Sága, Computational analysis of contact stress distribution in the case of mutual stewing of roller bearing rings. Novel Trends in Production Devices and Systems, Applied Mechanics and Materials 474, 363-368 (2014) [Google Scholar]
  3. M. Dudziak, A. Kołodziej, G. Domek, K. Talaśka, Multi-angularity - identification of parameters and compatibility conditions of the axisymmetric connection with form deviations. Procedia Engineering 177, 431-438 (2017) [CrossRef] [Google Scholar]
  4. M. Sága, M. Vaško, N. Čuboňová, W. Piekarska, Optimisation Algorithms in Mechanical Engineering Applications. (Pearson Education Limited, 291 p., 2016) [Google Scholar]
  5. A. Sapietová, V. Dekýš, M. Sapieta, P. Pecháč, Application of computational and design approaches to improve carrier stability. Procedia Engineering 96, 410-418 (2014) [Google Scholar]
  6. I. Kuric, V. Bulej, M. Sága, P. Pokorný, Development of simulation software for mobile robot path planning within multilayer map system based on metric and topological maps. International Journal of Advanced Robotic Systems 14 (6) (2017) [Google Scholar]
  7. MATLAB. [online] https://www.mathworks.com/products/matlab.html [Google Scholar]
  8. I. Pobočíková, Z. Sedliačková, M. Michalková, Application of four probability distributions for wind speed modeling. Procedia Engineering 192, 713-718 (2017) [Google Scholar]
  9. W. Spendley, G. R. Hext, F. R. Himsworth, Sequential Application of Simplex Designs in Optimization and Evolutionary Operations. Technometrics 4, 441-461 (1962) [CrossRef] [Google Scholar]
  10. J. A. Nelder, R. Mead, A Simplex Method for Function Minimization. Computer J. 7, 308-313 (1965) [Google Scholar]
  11. ADINA, Theory and Modelling Guide. [help manual] (Watertown, 2010) [Google Scholar]
  12. L. Žuľová, R. Grega, J. Krajňák, G. Fedorko, V. Molnár, Optimization of noisiness of mechanical system by using a pneumatic tuner during a failure of piston machine. Engineering Failure Analysis 79, 845-851 (2017) [CrossRef] [Google Scholar]
  13. J. Flizikowski, M. Macko, J. Czerniak, A. Mrozinski, Implementation of genetic algorithms into development of mechatronic multi-edge’s grinder design. ASME 2011 International Mechanical Engineering Congress and Exposition, Denver, Colorado, USA, November 11-17, 2011, 1227-1235 (2011) [CrossRef] [Google Scholar]
  14. P. Pecháč, M. Sága, Memetic algorithm with normalized RBF ANN for approximation of objective function and sedondary RBF ANN for error mapping. Procedia Engineering 177, 540-547 (2017) [CrossRef] [Google Scholar]
  15. W. Piekarska, M. Kubiak, Z. Saternus, Numerical simulation of deformations in T-joint welded by the laser beam. Archives of Metallurgy and Materials 58 (4) 1391-1396 (2013) [Google Scholar]
  16. M. Bara, T. Kmita, J. Korzekwa, Microstructure and properties of composite coatings obtained on aluminium alloys. Archives of Metallurgy and Materials 61 (3), 1107-1112 (2016) [CrossRef] [Google Scholar]
  17. J. Vavro, J. VavroJr., P. Kováčiková, R. Bezdedová, The optimisation of the materials properties for the passenger cars in dependence on defect distribution at the dynamic loading. Procedia Engineering 136, 114-119 (2016) [CrossRef] [Google Scholar]
  18. A. Vaško, L. Hurtalová, M. Uhríčik, E. Tillová, Fatigue of nodular cast iron at high frequency loading. Materialwissenschaft und Werkstofftechnik 47 (5-6), 436-443 (2016) [CrossRef] [Google Scholar]
  19. R. Halama, A. Markopoulos, F. Fojtik, M. Fusek, Z. Poruba, J. Famfulík, Effect of stress amplitude on uniaxial ratcheting of aluminum alloy 2124-T851. Materialwissenschaft und Werkstofftechnik 48 (8), 814-819 (2017) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.