MATEC Web Conf.
Volume 244, 2018Innovative Technologies in Engineering Production (ITEP’18)
|Number of page(s)||10|
|Section||New Trends in Vehicle Technology - Automotive Engineering|
|Published online||05 December 2018|
Engine with unconventional crank mechanism FIK1
University of Zilina, Department of Transport and Handling Machines, Faculty of Mechanical Engineering, Univerzitná 1, 010 26 Zilina, Slovakia
2 Technical University - Sofia, Faculty of Transport, 8 Kliment Ohridski Blvd., Block 9, 1000 Sofia, Bulgaria
* Corresponding author: firstname.lastname@example.org
The geometry and kinematics of unconventional engine mechanism FIK1 are described in the paper. Transformation of the piston linear movement to rotational movement is done by a swinging board, a baseboard and a crankshaft. The paper describes the trajectory and acceleration of an observed point on the swinging board in all three planes as well as the kinematics of the piston movement. The principle of the unconventional mechanism FIK1 is protected by patents No. 283742 and No. 283743. A mathematical model of the mechanism and some significant results are presented.
Key words: Combustion engine / Unconventional crank mechanism / Kinematics / Swinging board
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.