| Issue |
MATEC Web Conf.
Volume 244, 2018
Innovative Technologies in Engineering Production (ITEP’18)
|
|
|---|---|---|
| Article Number | 01012 | |
| Number of page(s) | 7 | |
| Section | Progressives Technologies | |
| DOI | https://doi.org/10.1051/matecconf/201824401012 | |
| Published online | 05 December 2018 | |
Problems of blackening of steel parts in technical practice
FME, Institute of technology and Materials, Pasteurova 3334/7, 400 96, Usti nad Labem, Czech Republic
* Corresponding author: sylvia.kusmierczak@ujep.cz
Problems of degradation are mainly solved in finished products, in a number of cases it is manifested during production. A great influence on the degradation processes of the products has the surface quality and surface finish. The article deals with the problem of blackening of steel, which has been treated with alkaline blackening. The throttle shaft made of automatic steel will be analyzed. Degradation was manifested by a change in surface quality after alkaline blackening. The methods of light and electron microscopy in combination with complex analysis of production flow and technology conditions were used for analysis. Based on the results of analyzes it was found that the degradation processes are closely related to the quality of preparation of the surface. Owing to the incorrect pretreatment of the surface, oxides occurred locally. At the sites of oxides, after alkaline blackening, the surface layer was peeled off, resulting in deterioration in the quality of the product.
Key words: Degradation / Blackening / Steel / EDX analysis
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.