MATEC Web Conf.
Volume 244, 2018Innovative Technologies in Engineering Production (ITEP’18)
|Number of page(s)
|Development Trends in Machining Technology
|05 December 2018
Influence of Ca, Sb and heat treatment on AlSi9CuMnNi alloy in frame of their properties from view of machining
Jan Evangelista Purkyne University in Usti nad Labem, Faculty of Mechanical Engineering, Pasteurova 7, 400 96 Usti nad Labem, Czech Republic
2 Faculty of Mechanical Engineering, Nha Trang University, Nha Trang, Vietnam
* Corresponding author: email@example.com
Treatment of metal alloys is one of the ways to affect the quality and properties of the material At the Faculty of Mechanical Engineering of the Jan Evangelista Purkyně University in Ústí nad Labem, one part of the research consists of searching for the influence of various modifying and inoculating elements on selected aluminium alloys. One of the alloys undergoing the present research is the hardening aluminium alloy AlSi9CuMnNi. The article describes one from these experiments, than AlSi9CuMnNi alloy was modified with various amounts of calcium (0.05, 0.1 and 0.15 wt. % Ca) and 0.2 wt. % Sb. The alloy without modification and with 0.2 wt. % Sb was heat-treated, too. In the experiment were made three castings for each type of alloy. Experimental samples were evaluated form view of final hardness, were machined, too and there were analysed tool wear of using cutting inserts and final ship from machining (turning). Presented experiments are part of the extensive research undertaken at FME at JEPU in Ústí nad Labem.
Key words: Modification / Alloy / Machining / Chip
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.