Open Access
MATEC Web Conf.
Volume 244, 2018
Innovative Technologies in Engineering Production (ITEP’18)
Article Number 01014
Number of page(s) 6
Section Progressives Technologies
Published online 05 December 2018
  1. P. Orsansky, B. Ftorek, P. Durcansky, Mathematical Model of a Closed Hot Air Engine Cycle Using MATLAB (R)/Simulink (R), AIP Conference Proceedings, 1608, 173-176 (2014) [Google Scholar]
  2. Z. Poruba, J. Szweda, J. Podešva, Boundary Conditions and Constraint Equations for Simulation of Energy Exchange. Applied Mechanics and Materials, 315, 929-935 (2013) [CrossRef] [Google Scholar]
  3. J. Vavro, J. VavroJr., P. Kovacikova, R. Bezdedova, The optimisation of the materials properties for the passenger cars in dependence on defect distribution at the dynamic loading, Procedia Engineering, 136, 114-119, (2016) [CrossRef] [Google Scholar]
  4. D. Stancekova, M. Sajgalik, J. Petru, N. Naprstkova, P. Balaz, Implementation of coating for failure elimination of dial gauges. METAL 2015 Conference Procedings of the 24th International Conference on Metallurgy and Materials, 1162-1169, (2015) [Google Scholar]
  5. D. Barta, M. Mruzek, Importance of real operating parameters for design of public transport vehicles drive. Scientific journals of the maritime university of Szczecinzeszyty naukowe akademii morsikiej w Szczecinie, 39(111), 5-10, (2014) [Google Scholar]
  6. M. Richardson, Modal analysis versus finite-element analysis. Sound & vibration, 39(9), 5-9, (2005) [Google Scholar]
  7. S. Miláček, Modální analýza mechanických kmitů. 2.vyd., Vydavatelství ČVUT, 154 s. (1991) [Google Scholar]
  8. M. Sága, L. Jakubovičová, Simulation of vertical vehicle non-stationary random vibrations considering various speeds. Scientific Journal of Silesian University of Technology - Series Transport, 84, 113-118 (2014) [Google Scholar]
  9. T. Harcarik, J. Bocko, K. Maslakova, Frequency analysis of acoustic signal using the Fast Fourier Transformation in MATLAB, Procedia Engineering, 48, 199-204, (2012) [CrossRef] [Google Scholar]
  10. M. Nad, L. Cicmancova, Effect of Shape Parameters on the Modal Properties of Stepped Ultrasonic Concentrator. Applied Mechanics and Materials, 309, 43-49, (2013) [CrossRef] [Google Scholar]
  11. M. Macko, K. Tyszczuk, G. Śmigielski, J. Flizikowski, A. Mroziński, The use of CAD applications in the design of shredders for polymers. MATEC, 157, 02027, (2018) [Google Scholar]
  12. M. Dudziak, G. Domek, A. Kołodziej, K. Talaśka, Contact Problems Between the Hub and the Shaft with a Three-angular Shape of Cross-section for Different Angular Positions. Procedia Engineering, 96, 50-58, (2014) [CrossRef] [Google Scholar]
  13. J. Podešva, J. Szweda, Z. Poruba, The Substructures Technique Including Contact Problem. Applied Mechanics and Materials, 315, 884-888, (2013) [CrossRef] [Google Scholar]
  14. M. Zmindak, P. Pastorek, P. Falat, M. Sapieta, Hardening monitoring and contact stress analysis of test samples, Proceedings of the institution of mechanical engineers part fjournal of rail and rapid transit, 230(1), 253-257, (2016) [CrossRef] [Google Scholar]
  15. L. Jakubovičová, M. Sága, M. Vaško, Numerical study of influence of mutual slewig of roller bearing rings on the principal stresses at contact area. Scientific journal of Silesian University of Technology - Series Transport, 84, 83-91 (2014) [Google Scholar]
  16. P. Kassay, J. Homisin, P. Copan, M. Urbansky, Verification of torsional oscillating mechanical system dynamic calculation results. Scientific journal of silesian university of technology-series transport, 84, 29-34, (2014) [Google Scholar]
  17. J. VavroJr., J. Vavro, P. Kovacikova, R. Bezdedova, Kinematic and dynamic analysis of the manipulator for removal of rough tyres, Procedia Engineering, 136, 120-124, (2016) [CrossRef] [Google Scholar]
  18. J. Famfulik, J. Mikova, M. Richtar, R. Halama, Random vector approach to the calculation of the number of railway vehicles to hold in reserve, Tehnicki vjesniktechnical gazette, 24(1), 7-14, (2017) [Google Scholar]
  19. P. Kopas, M. Blatnický, M. Sága, M. Vaško, Identification of mechanical properties of weld joints of AlMgSi07.F25 aluminium alloy. Metalurgija 56 (1-2), 99-102 (2017) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.