Open Access
| Issue |
MATEC Web Conf.
Volume 244, 2018
Innovative Technologies in Engineering Production (ITEP’18)
|
|
|---|---|---|
| Article Number | 02009 | |
| Number of page(s) | 7 | |
| Section | Development Trends in Machining Technology | |
| DOI | https://doi.org/10.1051/matecconf/201824402009 | |
| Published online | 05 December 2018 | |
- W. Pakiela, T. Tanski, Z. Brytan, K. Labisz, The influence of laser alloying on the structure and mechanical properties of AlMg5Si2Mn surface layers. Appl. Phys. A Mat. S&P, 122 (2016) [Google Scholar]
- E. Librera, G. Riva, H. Safarzadeh, B. Previtali, On the use of Areal Roughness Parameters to Assess Surface Quality in Laser Cutting of Stainless Steel with CO2 and Fiber Sources. Procedia CIRP, 33, 532-537 (2015) [CrossRef] [Google Scholar]
- K. Jarosz, P. Loschner, P. Nieslony, Effect of Cutting Speed on Surface Quality and Heataffected Zone in Laser Cutting of 316L Stainless Steel. Proc. Eng., 149, 155-162 (2016) [CrossRef] [Google Scholar]
- J. Petru, T. Zlamal, R. Cep, K. Monkova, P. Monka, Influence of Cutting Parameters on Heat Affected Zone after Laser Cutting. Tehnicki Vjestnik - Tech. Gaz., 20, 225-230 (2013) [Google Scholar]
- W. Pakiela, T. Tanski, M. Pawlyta, K. Pakiela, Z. Brytan, M. Sroka, The structure and mechanical properties of AlMg5Si2Mn alloy after surface alloying by the use of fiber laser. App. Phys. A., 124 (2018) [CrossRef] [Google Scholar]
- D. Narovec, Analysis of the surface after laser cutting: Diploma Thesis, 67 (2018) [Google Scholar]
- M. Hatala, J. Zajac, R. Cep, I. Orlovsky. Research of the technological parameters importance for plasma arc thermal cutting. In: 2nd ICMAE, 110-116 (2011) [Google Scholar]
- M. Tonkovic, Analysis of the material for laser cutting: Dip. thesis, 66 (2014) [Google Scholar]
- V. Musil, M. Sadilek, R. Cep, S. Malotova, The influence of cutting parameters on surface quality and nitrogen consumption during laser cutting. MM SJ. 2018, 2363-2366 (2018) [CrossRef] [Google Scholar]
- Trumpf Werkyeugmaschinen GmbH + Co. KG. Laser machining: CO2 laser - technical information, 2, 195 (2016) [Google Scholar]
- J. Stastny, Connection of mistakes cut with cutting characteristic at laser cutting. Dip. Thesis, 66 (2012) [Google Scholar]
- M. Grepl, Study of the Affected Areas of Superalloys Materials after Laser Beam Machining. Dis. thesis, 178 (2015) [Google Scholar]
- Trumpf Werkyeugmaschinen GmbH + Co. KG. Laser processing: CO2 laser - tech. info. 2, 156 (2007) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.