MATEC Web Conf.
Volume 244, 2018Innovative Technologies in Engineering Production (ITEP’18)
|Number of page(s)||10|
|Published online||05 December 2018|
The mould for production of plastic spout cap with internal thread by injection moulding
University of Žilina, Faculty of Mechanical Engineering, Department of Automation and Production Systems, Univerzitna 1, SK-010 26, Zilina, Slovakia
2 Technical University of Košice, Faculty of Manufacturing Technologies of the Technical University of Kosice with a seat in Prešov, Bayerova 1, SK-080 01, Prešov, Slovakia
* Corresponding author: email@example.com
The main aim of this article is the mould design for production of plastic spout cap with inner thread by injection moulding technology. There are described the basic steps of whole design process with respect to fulfil all technology and functionality requirements. The application of hot runner system as well as hybrid ejection system based on rotary cores and stripper plate can be considered as the main innovative features of the designed mould. The mould flow analysis was carried out for the functionality demonstration.
Key words: Injection moulding technology / Hot runner system / Rotary cores
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.