Issue |
MATEC Web Conf.
Volume 244, 2018
Innovative Technologies in Engineering Production (ITEP’18)
|
|
---|---|---|
Article Number | 01003 | |
Number of page(s) | 8 | |
Section | Progressives Technologies | |
DOI | https://doi.org/10.1051/matecconf/201824401003 | |
Published online | 05 December 2018 |
Determination of the force required for the hydroforming of al 99,5
Technical University of Cluj Napoca, Faculty of Machine Building, Blv Muncii 103-105, Cluj Napoca, Romania
* Corresponding author: vasile.ceclan@tcm.utcluj.ro
In this paper the authors present the hydroforming of the tubular parts. It also presents the technology of the tubular parts' hydroforming. In this paper we determine the forces necessary for the hydroforming process. They are also presented the mechanical parameters of the material that are used in the deformation process. Also, the variation in wall thickness of the aluminium specimen is determined before the deformation process
Key words: Hydroforming / Aluminium / Force / Wall thickness
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.