MATEC Web Conf.
Volume 244, 2018Innovative Technologies in Engineering Production (ITEP’18)
|Number of page(s)||10|
|Section||Development Trends in Machining Technology|
|Published online||05 December 2018|
The effect of chip former on power loading of recessing tool
VSB-TUO, Fakulty of Mechanikal Engieniring 17. listopadu 15/2172, 708 33 Ostrava-Poruba, CZ
2 University of Žilina, Faculty of Mechanical Engineering, Univerzitna 1, 010 26, Žilina, SK
* Corresponding author: Jiri.email@example.com
The article handles the influence of a chip former on cutting force and its components. This is allowed by using three grooving inserts from ISCAR company, which differ only with the chip former. These inserts have the same base material, coating and they are designed for the same proportion of recessed slot. The conditions of experiment were used in intersection of recommended cutting conditions of the 3 inserts. During the experiment were observed the components of cutting force at changing feed and cutting speed. The results were compiled in tables and graphs were created for each of the used inserts. The particular force loads of the inserts were compared in the end and conclusions thereof were made.
Key words: Recessing / Forces at cutting / Chip formers
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.