Open Access
| Issue |
MATEC Web Conf.
Volume 244, 2018
Innovative Technologies in Engineering Production (ITEP’18)
|
|
|---|---|---|
| Article Number | 02005 | |
| Number of page(s) | 10 | |
| Section | Development Trends in Machining Technology | |
| DOI | https://doi.org/10.1051/matecconf/201824402005 | |
| Published online | 05 December 2018 | |
- Technical specifications 1.6722 /16NiCrMo16-5 [online]. http://www.ccsteels.com/Structural_steel/2593.html [Google Scholar]
- Iscar.com. Iscareletroniccatalog [online]. https://www.iscar.com/eCatalog [Google Scholar]
- J. Novotný, J. Cais, N. Náprstková, Analysis of aluminium alloys AlSi7Mg0.3 and AlMg3 by means of X-Ray Diffraction, In Manufacturing Technology, Vol. 14, 392-397 (2014) [Google Scholar]
- S. Kuśmierczak, Methods of evaluation degraded parts. 14th International Scientific Conference Engineering for Rural Development 790-794 (2015) [Google Scholar]
- A. Gorog, D. Stančeková, M. Kapustova, I. Gorogova, I., Miturska, Influence of selected cutting conditions on cutting forces. In. Advances in Science and Technology Research Journal, 11, 179-185 (2017) [CrossRef] [Google Scholar]
- D. Stančeková, M. Šajgalík, J. Petru, N. Náprstková, P. Balaz, Implementation of coating for failure elimination of dial gauges. In: METAL 2015. (2015) [Google Scholar]
- D. Kalincová, M. Ťavodová, H. Čierna, P.Beňo, Analysis the causes of distortion castings after heat treatment , Acta Metallurgica Slovaca, 23, 182-192 (2017) [CrossRef] [Google Scholar]
- T. Skopeček, Vliv vybraných parametrů procesu na řezné síly při HSC. In: MM PRŮMYSLOVÉ SPETRUM https://www.mmspektrum.com/clanek/vlivvybranych-parametru-procesu-na-rezne-sily-pri-hsc.html [Google Scholar]
- N. Čuboňová, M. Císar, Design of Camera Mount and its Application for Monitoring Machining Process. In: Advances In Science And Technology-Research Journal, 9, 26 (2015) [Google Scholar]
- J. Jerzy, I. Kuric, S. Grozav, V. Ceclan, Calibration of 5 axis CNC machine tool with 3D quickSET measurement system. Academic Journal of Manufacturing Engineering Vol. 12, 20-25, (2014) [Google Scholar]
- M. Sapieta, A. Sapietová, V. Dekýš, Comparison of the thermoelastic phenomenon expressions, in stainless steels during cyclic loading. Metalurgija. 56, 203-206 (2017) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.