| Issue |
MATEC Web Conf.
Volume 244, 2018
Innovative Technologies in Engineering Production (ITEP’18)
|
|
|---|---|---|
| Article Number | 02004 | |
| Number of page(s) | 7 | |
| Section | Development Trends in Machining Technology | |
| DOI | https://doi.org/10.1051/matecconf/201824402004 | |
| Published online | 05 December 2018 | |
Optimization of machining processes preparation with usage of Strategy Manager
1
University of Žilina, Faculty of Mechanical Engineering, Department of Automation and Production systems, Univerzitná 1, 010 26 Žilina, Slovak Republic
2
University of Bielsko-Biala, Faculty of Mechanical Engineering and Computer Science, Department of Industrial Engineering, Willowa 2, 43-309 Bielsko-Biala, Poland
* Corresponding author: tomas.dodok@fstroj.uniza.sk
At present, the optimization has an important role in machining processes preparation of NC programs. The article deals with the possibilities of automate creation of NC programs by using the NC strategies in CAD/CAM system Edgecam 2017 R2. The main emphasis is placed on the suitability of use, the limitation of the creation and application of the NC strategies. The experiments deal with the comparison of effectiveness of the NC strategies applied to the components with different geometric features. The experimental components are divided into two groups. First group is represented by components with 2D features. Second group is based on components with 3D features. The motivation for this type of research is to increasing efficiency of the machining processes creation by automation tools in CAD/CAM systems.
Key words: Strategy Manager / Optimization / Edgecam 2017 / NC strategies
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.