Open Access
Issue
MATEC Web Conf.
Volume 244, 2018
Innovative Technologies in Engineering Production (ITEP’18)
Article Number 02003
Number of page(s) 7
Section Development Trends in Machining Technology
DOI https://doi.org/10.1051/matecconf/201824402003
Published online 05 December 2018
  1. S. Michna, I. Lukac, P. Louda, V. Ocenasek, H. Schneider, J. Drapala, R. Koreny, A. Miškufova, et al. Aluminium Materials and Technologies from A to Z. Adin, Prešov (2007) [Google Scholar]
  2. M. Michalski, F. Romankiewicz. AlSi21CuNi silumin modification with phosphor and strontium micro additions E3S. Web of Conferences, 19, Article number 03026 (2017) [Google Scholar]
  3. J. Formanek, L. Kucerova, M. Tochylin. The Hazards of Defects and Poor Quality of Aluminium Materials. Proceedings of 24th Internatioal Conference on Metallurgy and Materials Metal, 1552-1557 (2015) [Google Scholar]
  4. I. A. Petrov, D. V. Berezhnoi, A. P. Ryakhovskii, V. S. Moiseev. Effect of modification on the solidification of Al-Si aluminum alloys. Russian Metallurgy (Metally), Springer Nature 2017(3), 184-187 (2017) [CrossRef] [Google Scholar]
  5. N. Naprstkova, J. Cais, M. Ingaldi. Modification of AlSi9CuMnNi Alloy by Antimony and Heat Treatment and their Influence on Tool Wear after Turning. Manufacturing Technology, FME JEPU 16(1), 209-214 (2016) [Google Scholar]
  6. N. Naprstkova, J. Cais, J. Sviantek, H. Cierna. Change of selected resulting properties of AlSi9CuMnNi alloy by heat treatment and antimony. Proceedings of 15th international scientific conference Engineering for Rural Development, Latvia, 1133-1138 (2016) [Google Scholar]
  7. V. Weiss, E. Střihavková. Influence of the homogenization annealing on microstructure and mechanical properties of AlZn5,5Mg2,5Cu1,5 alloy. Manufacturing Technology, 12(12), 297-302 (2012) [Google Scholar]
  8. P. Wieroński, J. Pezda, L. Ponikwia. Effect of Heat Treatment on Machining Properties of the AlSi9Cu3(Fe) Alloy. Archives of Foundry Engineering, Walter de Gruyter 16(3), 137-140 (2016) [CrossRef] [Google Scholar]
  9. N. Naprstkova, D. Kalincova. Influence of Additional Chemical Components on Machining Properties of Selected Aluminium - Silicon Alloy. Proceedings of 14th international scientific conference Engineering for Rural Development, Latvia, 766-771, (2015) [Google Scholar]
  10. N. Naprstkova, S. Kusmierczak, J. Cais. Modification of AlSi7Mg0.3 alloy by strontium. Manufacturing Technology, FME UJEP, 13(3), 373-380 (2013) [Google Scholar]
  11. J. Petru, J. Schiffner, T. Zlamal, M. Sadilek, D. Stancekova. Investigations of Cutting Tool Wear While Machining Inconel 718. Manufacturing Technology, 15(3), 396-403 (2015) [Google Scholar]
  12. N. Naprstkova, S. Kusmierczak, J. Cais. Modification of AlSi7Mg0.3 alloy by strontium. Manufacturing Technology, FME UJEP, 13(3), 373-380 (2013) [Google Scholar]
  13. Zetek, M., Bakša, T., Schorník, V., Zetková, I. Monitoring and Evaluating Cutting Tool Wear using a IFM G4 Microscope. Manufacturing Technology, FME UJEP, 16(5), 1211-1216 (2016) [Google Scholar]
  14. J. Petru, T. Zlamal, R. Cep, D. Stancekova, M. Pagac, O. Vorel. Mechanisms of cutting insert wear and their influence on cutting ability of the tool during machining of special alloys. Proceedings METMG 2015, Canada, 36-40, (2015) [Google Scholar]
  15. S. Kusmierczak. Usage of Technical Equipment in Teaching Technical Subjects. Proceedings of 14th international scientific conference Engineering for Rural Development, Latvia, 748-752 (2015) [Google Scholar]
  16. I. Novakova, J. Stverak, J. Moravec. Hardness of the High Pressure Die Castings from Alloy AlSi9Cu3 in dependence on the Subsequent Processing Technology. Manufacturing Technology. FME JEPU, 15(4), 647-652 (2015) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.