MATEC Web Conf.
Volume 244, 2018Innovative Technologies in Engineering Production (ITEP’18)
|Number of page(s)||6|
|Published online||05 December 2018|
Welding materials used to increase service life of agricultural machinery processing soil
Czech University of Life Sciences Prague, Faculty of Engineering, Department of Material Science and Manufacturing Technology, Kamýcká 129, Praha 6 - Suchdol, Czech Republic
2 Czech University of Life Sciences Prague, Faculty of Engineering, Department of Mechanical Engineering, Kamýcká 129, Praha 6 - Suchdol, Czech Republic
* Corresponding author: firstname.lastname@example.org
Intensive abrasive wear occurs in soil-treatment machines. This article is focused on increasing the service life of ploughs by the welding material. The welding material is applied at a 45° angle to the tool. This material is abrasive wear resistant. The welding material was applied parallel to the head of ploughshares with spacing of 60 mm. Carbide materials were used (SK 258 TiC-O, SK 900-O, SK A43-O, SK 299- O, SK A45-O, OK TUBRODUR 15.82, SK 258 TiC-O). The tested ploughshare variants were wearing the same when were used the welding material and the standard.
Key words: Abrasive wear / Ploughshare / Statistics
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.