Open Access
Issue |
MATEC Web Conf.
Volume 244, 2018
Innovative Technologies in Engineering Production (ITEP’18)
|
|
---|---|---|
Article Number | 01026 | |
Number of page(s) | 6 | |
Section | Progressives Technologies | |
DOI | https://doi.org/10.1051/matecconf/201824401026 | |
Published online | 05 December 2018 |
- V. Peťková, J. Svoboda, Thermodiagnostics. ISBN 978-80-8126-132-9 (2016) [Google Scholar]
- M. Honner, P. Honnerova, Survey of emissivity measurement by radiometric methods. Applied Optics, 54, 669-683, (2015) [Google Scholar]
- M. Honner, P. Litoš, M. Švantner, Thermography analyses of the hole-drilling residual stress measuring technique. Infrared Physics & Technology, 45, 131-142, (2004) [CrossRef] [Google Scholar]
- P. Honnerova, J. Martan, M. Kucera, Martin, M. Honner, J. Hameury, New experimental device for high-temperature normal spectral emissivity measurements of coatings, Measurement Science and Technology, 25, Art.No. 095501 (2014) [Google Scholar]
- P. Pastorek, P. Novak, P. Kopas, M. Mocilan, Finite element analysis of bond behavior in a steel reinforced concrete structure strengthened carbon fibre reinforced polymer (CFRP) strips. METALURGIJA, 56, 405-408, (2017). [Google Scholar]
- Z. Murcinkova, P. Novak, V. Kompis, M. Zmindak, Homogenization of the finite-length fibre composite materials by boundary meshless type method. Archive Of Applied Mechanics, 88, 789-804, (2017) [Google Scholar]
- P. Novak, M. Zmindak, Z. Pelagic, High-Pressure Pipelines Repaired by Steel Sleeve and Epoxy Composition. Applied Mechanics and Materials1, 486, 181-188, (2014) [CrossRef] [Google Scholar]
- L. Radziszewski, M. Saga, Modeling of non-elastic properties of polymeric foams used in sports helmets. Procedia Engineering. 177, 314-317 (2017) [Google Scholar]
- M. Kekez, L. Radziszewski, A. Sapietova, Fuel type recognition by classifiers developed with computational intelligence methods using combustion pressure data and the crankshaft angle at which heat release reaches its maximum Procedia Engineering, 136, 353-358, (2016) [CrossRef] [Google Scholar]
- R. Halama, P. Gál, P. Paška, Z. Sedlák, A new accelerated technique for validation of cyclic plasticity models. MATEC Web of ConferencesVolume, 157, Art. No. 05008, (2014) [Google Scholar]
- I. Glodova, T. Liptak, J. Bocko, Usage of finite element method for motion and thermal analysis of a specific object in SolidWorks environment. Procedia Engineering, 96, 131-135, (2014) [CrossRef] [Google Scholar]
- M. Handrik, M. Vasko, P. Kopas, V. Mozer, The linear and nonlinear stability loss of structures due to thermal load. Procedia Engineering. 136, 359-364 (2016) [CrossRef] [Google Scholar]
- Z. Murcinkova, P. Novak, V. Kompis, M. Zmindak, Homogenization of the finite-length fibre composite materials by boundary meshless type method. ARCHIVE OF APPLIED MECHANICS, 88, 789-804, (2017) [Google Scholar]
- P. Novak, M. Zmindak, Z. Pelagic, High-Pressure Pipelines Repaired by Steel Sleeve and Epoxy Composition. Applied Mechanics and Materials1, 486, 181-188, (2014) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.