Open Access
MATEC Web Conf.
Volume 244, 2018
Innovative Technologies in Engineering Production (ITEP’18)
Article Number 01004
Number of page(s) 9
Section Progressives Technologies
Published online 05 December 2018
  1. R. Karpiński, Ł. Jaworski, J. Zubrzycki, Structural analysis of articular cartilage of the hip joint using finite element method. Advances in Science and Technology Research Journal (2016) [Google Scholar]
  2. J. Zubrzycki, R. Karpinski, L. Jaworski, A.M. Ausiyevich, N. Smidova, Structural analysis of the pelvic girdle before and after hip replacement procedure. Science & Technique. 17(2), 165-172 (2018) [on line -] [CrossRef] [Google Scholar]
  3. M. Navarro, A. Michiardi, O. Castano, J. A. Planell, Biomaterials in orthopaedics. Journal of the Royal Society Interface, 5(27), 1137-1158 (2008) [CrossRef] [Google Scholar]
  4. S. Błażewicz, L. Stoch, Biomateriały. Warszawa, Akademicka Oficyna Wydawnicza Exit (2003) [Google Scholar]
  5. M. Nałęcz, H. Kuś, Wydawnictwa Komunikacji i Łączności, eds. Problemy biocybernetyki i inżynierii biomedycznej. Biomateriały, Wydawnictwa Komunikacji i Łączności (1990) [Google Scholar]
  6. S. R. Knight, R. Aujla, S. P. Biswas, Total hip arthroplasty-over 100 years of operative history. Orthopedic reviews, 3(2), 16. (2011) [CrossRef] [PubMed] [Google Scholar]
  7. J. Caban, R. Karpiński, D. Barta, Road traffic accident injuries-Causes and biomaterial related treatment. Automotive Safety, 2018 XI International Science-Technical Conference, 1-7 (2018) [Google Scholar]
  8. A., Massazza, G., Verné, E., Massè, A., Deledda, D.S., Ferraris, ... & Crova, M. Antibiotic-loaded cement in orthopedic surgery: a review. ISRN orthopaedics (2011) [Google Scholar]
  9. H. Lelovics, T. Liptakova, Time and mixing techniquedependent changes in bone cement SmartSet (R) HV. Acta of bioengineering and biomechanics. 1;12(4):63-7 (2010) [Google Scholar]
  10. T. Liptáková, H. Lelovics, L. Necas, Variations of temperature of acrylic bone cements prepared by hand and vacuum mixing during their polymerization. Acta Bioeng Biomech. 1;11:47-51 (2009) [Google Scholar]
  11. H. Lelovics, T. Liptáková, Comparison of some mechanical and rheological properties of bone cements. 25th Danubia - Adria Symposium on Advances in Experimental Mechanics, Czech Republic, 157-158 (2008) [Google Scholar]
  12. R. Vaishya, M. Chauhan, A. Vaish, Bone cement. Journal of Clinical Orthopaedics and Trauma, 4(4), 157-163 (2013), [CrossRef] [Google Scholar]
  13. M. Sarlinova, E. Halasova, P. Palcek, R. Seewald, Fracture properties of bone cements. ELEKTRO, 616-620 (2014) [Google Scholar]
  14. Þ. Pétursson, K. J. Edmunds, M. K. Gíslason, B. Magnússon, G. Magnúsdóttir, G. Halldórsson,... & P. Gargiulo, Bone mineral density and fracture risk assessment to optimize prosthesis selection in total hip replacement. Computational and mathematical methods in medicine (2015) [Google Scholar]
  15. P. Gargiulo, T. Pétursson, B. Magnússon, P. Bifulco, M. Cesarelli, G. M. Izzo,... & H. Jónsson, Assessment of total hip arthroplasty by means of computed tomography 3D models and fracture risk evaluation. Artificial organs, 37(6), 567-573. (2013) [Google Scholar]
  16. A.J.C Lee, R.S.M Ling, S.S Vangala, Some clinically relevant variables affecting the mechanical behavior of bone cement. Arch Orthop Traumat Surg, 92: 1-18 (1978) [CrossRef] [Google Scholar]
  17. A.J.C Lee, R.S.M Ling, S. Gheduzzi, J-P Simon, R.J. Renfro. Factors affecting the mechanical and viscoelastic properties of acrylic bone cement. J Mater Sci - Mater in med., 13: 723-733 (2002) [CrossRef] [Google Scholar]
  18. A.J.C. Lee, The mechanical properties of recovered PMMA bone cement. Hip International 2004; 142 p.79 (2004) [Google Scholar]
  19. R. Karpiński, J. Szabelski, J. Maksymiuk, Effect of Ringer’s Solution on Tensile Strength of Non-Absorbable, Medium-and Long-Term Absorbable Sutures. Advances in Science and Technology. Research Journal, 11/4, (2017) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.