Issue |
MATEC Web Conf.
Volume 286, 2019
14th Congress of Mechanics (CMM2019)
|
|
---|---|---|
Article Number | 03005 | |
Number of page(s) | 3 | |
Section | Solid and Composite Materials | |
DOI | https://doi.org/10.1051/matecconf/201928603005 | |
Published online | 14 August 2019 |
Numerical simulation of investment casting process of nickel-based alloy.
1
Laboratory of Physical-Chemistry of Processes and Materials, Hassan 1 st University, Faculty of Sciences and Technology Settat, Settat, Morocco
2
Laboratory of Engineering and Materials Science, University of Reims Champagne-Ardenne, Reims, France.
In this paper, we elaborated the nickel-based alloy type Hastelloy G30 and we analyzed it by techniques of characterization in order to interpret the results obtained through a computer simulation. The calculation of the thermo-physical properties of the alloy and the simulation of filling and solidification of the casting was performed by the software ProCAST. The validation of the numerical results was done by the following experimental techniques: optical microscopy and hardness test. In the center of the elaborate piece, the experimental results showed the appearance of porosity and leading to embrittlement of the alloy. According to the numerical simulation, this is caused by a fraction of the liquid that remains trapped in this area.
Key words: Hastelloy G30 / ProCAST / Optical microscopy / Porosity / Solidification / Investment casting.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.