MATEC Web Conf.
Volume 286, 201914th Congress of Mechanics (CMM2019)
|Number of page(s)||3|
|Section||Solid and Structural Mechanics Modelling|
|Published online||14 August 2019|
A review and application of the failure criteria on a graphite epoxy under three-point bending test
Équipe de Recherche Appliquée sur les Polymères, Département de Génie Mécanique, ENSEM, Université Hassan II de Casablanca, BP 8118, Oasis, Casablanca, Maroc.
The application of failure criteria are difficult partly because they are too various and must be validated by biaxial tests, which are expensive to be achieved. In this work, an analytical modeling based on a software program has been elaborated for application of the most general failure criteria and prediction of successive failure. Finally, the results obtained by this analytical modeling show a good correlation with those carried out by experimental study.
Key words: Three-point bending test / Failure criteria / successive failure.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.