Free Access to the whole issue

Open Access

Statement of Peer review

Published online: 29 October 2018

• PDF (128 KB)

Open Access

About the conference

Published online: 29 October 2018

• PDF (135 KB)

Functional Material Design and Analysis

Open Access

Optimization of Molding Parameters Using Taguchi Method to Increase the Electrical Conductivity and Tensile Strength of Conductive Polymer Composites 01001

H Suherman, P Pulungan, Y Yovial and Irmayani

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822101001

• Abstract
• PDF (702.5 KB)
• References

Open Access

Empirical Modeling of Average Cutting Speed during WEDM of Gas Turbine Alloy 01002

Bhupinder Singh and Joy Prakash Misra

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822101002

• Abstract
• PDF (966.7 KB)
• References

Open Access

Effect of Intermetallic Compound Deposits on Wear Resistance and Microhardness on AISI 1020 Steel Substrate Using GTAW Process 01003

J.S. Gill and Sikandar Singh Dhiman

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822101003

• Abstract
• PDF (521.6 KB)
• References

Open Access

Process Parameter Optimization for Abrasive Water Jet Machining of Titanium Alloy Using Meta-Heuristic Algorithms 01004

Vishal S Sharma, Amit Kumar, Munish Kumar Gupta and Neeraj Bhanot

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822101004

• Abstract
• PDF (338.3 KB)
• References

Open Access

Investigation on the Particle Growth of Rutile TiO2 Suppressed by Manganese 01005

Aripin, Edvin Priatna, Nundang Busaeri, Rudi Priyadi, I Nyoman Sudiana, I Made Joni and Svilen Sabchevski

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822101005

• Abstract
• PDF (405.1 KB)
• References

Open Access

Optimizing prefabricated construction techniques in UAE as a solution to shortage of middle-income housing 01006

Mohamed Elkaftangui and Mohamed Basem

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822101006

• Abstract
• PDF (308.8 KB)
• References

Open Access

Laser cleaning for rust removal on mild steel: An experimental study on surface characteristics 01007

Vishnu Narayanan, Ramesh K Singh and Deepak Marla

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822101007

• Abstract
• PDF (370.6 KB)
• References

Open Access

Interaction between plastic deformation and hydrogen damage behavior of 30CrMnSiNi2A steel 01008

Lei Fu and Hongyuan Fang

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822101008

• Abstract
• PDF (914.8 KB)
• References

Open Access

Nominal stress based equal fatigue bearing capacity design of HSLA steel V-shaped butt-welded joints 01009

Wen Xue, Ping Wang, Zhibo Dong and Hongyuan Fang

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822101009

• Abstract
• PDF (363.5 KB)
• References

Open Access

Material Characterization of Test Contact Pin 01010

Praveen kumar Ramamoorthy, Florian Fischer, Han Guan and Murad Hudda

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822101010

• Abstract
• PDF (560.8 KB)
• References

Open Access

Dichroism Infrared-reflective Thermochromic Ink of Mobile Terminals’ Recognition 01011

Baoning Sha and Shengyao Zhao

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822101011

• Abstract
• PDF (353.9 KB)
• References

Product Design and Quality Control

Open Access

Perceived Affordances in Older People with Dementia: Designing Intuitive Product Interfaces 02001

Li-Hao Chen, Yi-Chien Liu and Pei-Jung Cheng

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822102001

• Abstract
• PDF (391.1 KB)
• References

Open Access

Fault Identification in Pipeline System Using Normalized Hilbert Huang Transform and Automatic Selection of Intrinsic Mode Function 02002

Hanafi M. Yusop, M.F. Ghazali, M.F.M. Yusof, M.A.Pi Remli and M. Samykano

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822102002

• Abstract
• PDF (617.3 KB)
• References

Open Access

Reliability Implementation and Cost Trade-off of Product during the Development Process 02003

Wei Wang, Yuan Li, Qi Zhang, Weijia Feng, Huichao Liu and Pengyan Liu

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822102003

• Abstract
• PDF (265.4 KB)
• References

Open Access

A TRL Assessment Method Considering Reliability Requirements 02004

Wei Wang, Qi Zhang, Yuan Li, Weijia Feng, Wei Zhang and Huichao Liu

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822102004

• Abstract
• PDF (210.7 KB)
• References

Open Access

Systematic Innovation for Manufacturing Quality Improvement 02005

Swee Shu Luing Nikalus, Guan Toh Guat, Mum Wai Yip and See Chew Tai

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822102005

• Abstract
• PDF (287.1 KB)
• References

Open Access

Design and Construction of Sago Rasper (As Business Process Re-Engineering of Sago Flour) 02006

Taufiq Immawan, Dicky Bayuadi Saputro and Winda Nur Cahyo

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822102006

• Abstract
• PDF (292.7 KB)
• References

Open Access

Combining Time and Physical Workload Analysis on Cold Press Working Group for Operator Management in Manufacturing Company 02007

Muhammad Ragil Suryoputro, Tresna Candra Ginanjar and Amarria Dila Sari

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822102007

• Abstract
• PDF (350.1 KB)
• References

Open Access

A Study for New Balance Sports Products to Analyze and Design 02008

Yu-Che Huang and Tai-Shen Huang

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822102008

• Abstract
• PDF (944.3 KB)
• References

Open Access

Design of an Automated White Board Profiler 02009

Md. Tanzim Hasan, Shahin Parvez, Shaylesh Roy, Md. Abdullah Sakib and K. M. Khalidur Rahman

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822102009

• Abstract
• PDF (742.8 KB)
• References

Open Access

Derivation of Life Cycle Cost Model for Selecting Optimum Decisions in Engineering Asset Management 02010

W.N. Cahyo

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822102010

• Abstract
• PDF (261.1 KB)
• References

Open Access

Design for Supplier Performance Assessment Model of Information Technology Service Provider in Small Medium Enterprises in Indonesia 02011

Elisa Kusrini and Alfanugrah Hi Usman

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822102011

• Abstract
• PDF (374.5 KB)
• References

Vehicle Engineering and Manufacturing

Open Access

Workload analysis for Sanding Small Grand Piano Department in Manufacturing company 03001

Amarria Dila Sari, Ahmad Azhar Basyir and M.Ragil Suryoputro

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822103001

• Abstract
• PDF (297.3 KB)
• References

Open Access

Power Translations for Deterrence or Stimulation of Wheelie/Wheel-stand for a Straight Moving Vehicle 03002

Gursagar Singh

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822103002

• Abstract
• PDF (802.7 KB)
• References

Open Access

Kano Model for Identification Car Modification Features of Mobile Application 03003

Muchamad Sugarindra and Rian Notia Pratama

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822103003

• Abstract
• PDF (332.5 KB)
• References

Open Access

Automated programming robot component transfer system utilizing machine vision as detection interface 03004

H J Vermaak and L Rogers

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822103004

• Abstract
• PDF (562.0 KB)
• References

Mechanical Engineering and Control Technology

Open Access

A novel geometric error identification methodology for the tilting head of five-axis machine tools based on double ball bar 04001

Jinwei Fan, Changjun Wu and Zhongsheng Li

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822104001

• Abstract
• PDF (853.4 KB)
• References

Open Access

Motion Error Analysis and Modeling Technology of CNC Camshaft Grinder 04002

Jinwei Fan, Haohao Tao, Changjun Wu and Yuhang Tang

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822104002

• Abstract
• PDF (881.0 KB)
• References

Open Access

Effects of tooth profile and belt speed on cogged V-belt vibration and stress 04003

Zechen Zeng, Xianglong Zhang, Jiangming Kan and Wenbin Li

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822104003

• Abstract
• PDF (812.4 KB)
• References

Open Access

An Improvement in Welded Joint Using Vibration Assisted Arc Welding 04004

Mohammad Ahsan Habib, Anayet U Patwari, Nuruzzaman Rakib, Mahmudul H. Pavel, Ahmed Y. Sanin, Asif Salman and Fahrial Alam

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822104004

• Abstract
• PDF (558.6 KB)
• References

Open Access

Influence of the Characteristics of a Workpiece on the Slicing Characteristics Including Tool Wear 04005

Satoshi Sakamoto, Masaya Gemma, Yasuo Kondo, Kenji Yamaguchi, Mitsugu Yamaguchi and Takao Yakou

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822104005

• Abstract
• PDF (570.2 KB)
• References

Open Access

Extremely Thin Metal Foil Blades as Cutting Tools for Hard and Brittle Materials 04006

Satoshi Sakamoto, Sanshiro Akaoka, Masaya Gemma, Yasuo Kondo, Kenji Yamaguchi, Mitsugu Yamaguchi and Takao Yakou

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822104006

• Abstract
• PDF (567.9 KB)
• References

Open Access

Non-linear Analysis of Vibrating Flip-flow Screens 04007

Sanpeng Gong, Xinwen Wang and Sebastian Oberst

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822104007

• Abstract
• PDF (522.0 KB)
• References

Open Access

Stress Analysis and Design of Main Reducer Housing Using Finite Element Method 04008

S. Wang

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822104008

• Abstract
• PDF (772.4 KB)
• References

Open Access

To Determine the Effect of Dimpled Poppet Valve on the Flow in Engine Cylinder by Port Flow Simulation 04009

Anirudh Singh, Apoorv Dubey and Raj Kumar Singh

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822104009

• Abstract
• PDF (661.0 KB)
• References

Open Access

Human Ergonomics Study in Microgravity Environment 04010

Pengyan Liu, Dong Zhou, Long Xue and Yuan Li

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822104010

• Abstract
• PDF (454.7 KB)
• References

Aerospace engineering

Open Access

Increase of Critical Mach Number by Local Linearization Method and Airfoil Construction at Subsonic and Transonic Regimes 05001

Ali. S. Bazgir and Sergey. A. Takovitskii

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822105001

• Abstract
• PDF (634.7 KB)
• References

Open Access

Optimal Aerodynamic Shape Optimization of a Paraglider Airfoil Based on the Sharknose Concept 05002

Amir A. Abdelqodus and Innokentiy A. Kursakov

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822105002

• Abstract
• PDF (963.4 KB)
• References

Open Access

Numerical Simulation of the Motion of an Unmanned Aerial Vehicle 05003

Il’ya O. Akimov and Vsevolod V. Koryanov

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822105003

• Abstract
• PDF (699.4 KB)
• References

Open Access

Vortex Loops Based Method for Subsonic Aerodynamic Loads Calculation 05004

Georgy A. Shcheglov and Sergey A. Dergachev

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822105004

• Abstract
• PDF (623.7 KB)
• References

Open Access

The Development of the Ideas and Perspectives of the Joined Wing Aircraft 05005

Semenov Vladimir, Phone Myint Tun, Voityshen Vladimir and Hardeep Zinta

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822105005

• Abstract
• PDF (1.152 MB)
• References

Open Access

A Mission Performance Evaluation Approach for Civil UAS Applications 05006

Ekaterina Fokina, Jens Feger and Mirko Hornung

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201822105006

• Abstract
• PDF (818.1 KB)
• References