Open Access
| Issue |
MATEC Web Conf.
Volume 221, 2018
2018 3rd International Conference on Design and Manufacturing Engineering (ICDME 2018)
|
|
|---|---|---|
| Article Number | 03003 | |
| Number of page(s) | 4 | |
| Section | Vehicle Engineering and Manufacturing | |
| DOI | https://doi.org/10.1051/matecconf/201822103003 | |
| Published online | 29 October 2018 | |
- Ulus, A. A. 2013. Bauran Pemasaran Pengaruhnya terhadap Keputusan Pembelian Mobil Daihatsu pada PT. Astra International Manado. Universitas Sam Ratulangi, Manado. Jurnal EMBA ISSN 2302-1174 Vol. 1 No. 4, pp.1134–1144 [Google Scholar]
- Meraup untung bisnis modifikasi mobil, http://bandung.bisnis.com/read/20110611/3/57387/meraup-untung-bisnis-modifikasi-mobil, accessed on a date 6th April, 2018 [Google Scholar]
- Hashim, A.Md.; Dawal, S.Z.Md. (2012). “Kano model and QFD integration approach for Ergonomic Design Improvement”. International (summer) Conference on Business Innovation and Technology Management, Vol.57, pp.: 22 – 33. [Google Scholar]
- Zong, L.; Yu, S.; Li, B. (2013). “The model building research of product innovation design quality based on QFD and KANO”. Trans Tech Publications, Switzerland, Vol. 271-272, pp.: 1467 – 1472. [Google Scholar]
- Choirumah, Moses L. Singgih, 2014, Pengembangan Model Integrasi QFD-Kano-Axiomatic Design-Fuzzy Goal Programming Serta Aplikasi Triz Dalam Memaksimalkan Kepuasan Dan Meminimalkan Biaya Pengembangan Produk, http://digilib.its.ac.id/public/ITS-paper-40145-2510100044-paper.pdf accessed on a date 15th May 2018 [Google Scholar]
- Shinta Oktriviani,Sari Wulandari, Ika Arum Puspita, 2017, The Need Analysis Of I-Gracias Application Using The Integration Of Web Usability And Kano’s Model (Study Case On By Telkom University Engineering Faculty College Student ), e-Proceeding of Engineering : Vol.4, No.3 December 2017 [Google Scholar]
- Aprilia P.D, Amani H, Wulandari S., 2017 Needs Analysis Of E-Commerce Website Services On Dkantin.Com Using Integration E-Service Quality And Kano, e-Proceeding of Engineering : Vol.4, No.3 December 2017 [Google Scholar]
- Huang, J. 2017. Application of Kano Model in Requirements Analysis of Y Company’s Consulting Project. American Journal of Industrial and Business Management, pp. 910–918. [CrossRef] [Google Scholar]
- Tan, K. C., and Pawitra, T. A. 2001. Integrating SERVQUAL and Kano’s Model into QFD for Service Excellence Development. Managing Service Quality Vol. 11 No. 6, pp. 418–430 [CrossRef] [Google Scholar]
- Eriyanto. 2007. Teknik Sampling Analisis Opini Publik. Yogyakarta: PT. LkiS Pelangi Aksara. [Google Scholar]
- Berger, C.; Blauth, T.; Boger, C.; Burchill, G.; Du Mouchel, W.; Pouliot, F.; Richter, R.; Rubinoff, A.; Shen, D.; Timko, M.; Walden, D. (1993). “Kano’s methods for understanding customer-defined quality”. Center for Quality Management Journal, Vol. 2 (4), pp.: 3 – 36 [Google Scholar]
- Walden, D. 1993. A Special Issue on Kano’s Methods for Understanding Customer Defined Quality. The Center for Quality of Management Journal, pp. 3–35. [Google Scholar]
- Hasan M., 2016 Analisis Kebutuhan Robot Rehabilitasi Pasien Pasca Stroke dengan Menggunakan Metode Kano, JITI, Vol.15 (2), December 2016, 151 – 15 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.