| Issue |
MATEC Web Conf.
Volume 221, 2018
2018 3rd International Conference on Design and Manufacturing Engineering (ICDME 2018)
|
|
|---|---|---|
| Article Number | 04005 | |
| Number of page(s) | 4 | |
| Section | Mechanical Engineering and Control Technology | |
| DOI | https://doi.org/10.1051/matecconf/201822104005 | |
| Published online | 29 October 2018 | |
Influence of the Characteristics of a Workpiece on the Slicing Characteristics Including Tool Wear
1
Yokohama National University, 79-2 Tokiwadai, Hodogaya-ku, Yokohama, Japan
2
Yamagata University, 4-3-16 Jonan, Yonezawa, Japan
3
Yonago National College of Technology, 4448 Hikona-cho, Yonago, Japan
4
Salesian Polytechnic, 4-6-8 Oyamagaoka, Machida, Japan
Multi-wire saws with a diamond electrodeposited wire tool are widely used to slice hard and brittle materials. The properties of the materials significantly affect the saw’s performance in terms of slicing quality, efficiency, and accuracy. In this study, the effects of the material properties of workpieces on wire tool performance and tool wear are described. The main conclusions are as follows: the higher the hardness and toughness of the workpiece material, the longer the slicing time and greater the damage to the wire tool. The brittleness of the workpiece adversely affects the thickness variation more than its hardness. In addition, the frequency of chipping mainly depends on the hardness of the workpiece, whereas the chipping size mainly depends on the toughness of the workpiece.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.