Free Access to the whole issue

Open Access

Statement of Peer review

Published online: 10 August 2015

• PDF (224 KB)

Open Access

About the conference

Published online: 10 August 2015

• PDF (40 KB)

Open Access

Editorial

Preface 00001

Yi Qin

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152100001

• Abstract
• PDF (27.24 KB)

Keynote Papers

Open Access

Sheet-bulk metal forming – forming of functional components from sheet metals 01001

Marion Merklein, Daniel Gröbel, Maria Löffler, Thomas Schneider and Philipp Hildenbrand

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152101001

• Abstract
• PDF (896.6 KB)
• References

Open Access

Innovative cold joining technologies based on tube forming 01002

L.M. Alves, C.M.A. Silva and P.A.F. Martins

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152101002

• Abstract
• PDF (574.7 KB)
• References

Open Access

New Challenges to the automotive fasteners and cold formed parts in the chinese markets 01003

Jin Guang Chen, Zhi Xian Zhang and Chee Mun Choy

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152101003

• Abstract
• PDF (671.4 KB)
• References

Open Access

From materials characterisation to pre-production validation; the role of the research centre in enabling new approaches to providing processing solutions to industry 01004

Paul L. Blackwell

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152101004

• Abstract
• PDF (774.9 KB)
• References

Open Access

Superplastic forming and diffusion bonding: Progress and trends 01005

Li Zhiqiang, Zhao Bing and Chen Wei

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152101005

• Abstract
• PDF (1.399 MB)
• References

Forging and Extrusion

Open Access

Time-dependent rheoforging of A6061 aluminum alloy on a mechanical servo press and the effects of forming conditions on homogeneity of rheoforged samples 02001

Yi Meng, Sumio Sugiyama and Jun Yanagimoto

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152102001

• Abstract
• PDF (942.9 KB)
• References

Open Access

Investigation on upsetting assisted by low-frequency vibration 02002

M. Zhang, P. Li, D. Yao, L. Deng, J.S. Jin and X.Y. Wang

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152102002

• Abstract
• PDF (829.2 KB)
• References

Open Access

Effect of rotational speed in rotary hammer forging process 02003

Muhammad M Hamdy

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152102003

• Abstract
• PDF (400.4 KB)
• References

Open Access

The prediction of the evolution of grain size of land-gear forging during the die-forging process 02004

Gao Lin, Chen Xiaoci, Wang Yueqiao, Li Pengchuan and Quanlin Jin

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152102004

• Abstract
• PDF (772.7 KB)
• References

Open Access

Modelling and experimental research in hot precision forging of shaft gear 02005

Baoyu Wang, Zhi Li, Mingnan Zheng, Bin Zuo, Jianguo Lin and Chuanbao Zhu

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152102005

• Abstract
• PDF (562.0 KB)
• References

Open Access

Study on the isothermal forging process of MB26 magnesium alloy adaptor 02006

Wenchen Xu, Chuan Yang, Debin Shaninst, Fuchang Xu, Guan Wang and Bin Guo

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152102006

• Abstract
• PDF (412.9 KB)
• References

Open Access

Comparison study of multistep forging and injection forging of automobile fasteners 02007

Senyong Chen and Yi Qin

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152102007

• Abstract
• PDF (422.5 KB)
• References

Open Access

Production of extremely deep sleeves by backward cold extrusion 02008

Nadja Labanova, Mathias Liewald and Alexander Felde

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152102008

• Abstract
• PDF (549.6 KB)
• References

Open Access

Prediction of grain deformation in drawn copper wire 02009

Chao-Cheng Chang, Zi-Wei Wang, Chien-Kuo Huang and Hsu-Fu Wu

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152102009

• Abstract
• PDF (520.2 KB)
• References

Open Access

The coarsening effect of SA508-3 steel used as heavy forgings material 02010

Dong Dingqian, Cui Zhenshan and Liu Mingxiang

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152102010

• Abstract
• PDF (1.224 MB)
• References

Rolling and Roll Forming

Open Access

Blank size dependence of microstructure in radial-axial ring rolling of TA15 titanium alloy by macro-micro FE simulation 03001

Lianggang Guo, Shuai Zhu and He Yang

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152103001

• Abstract
• PDF (442.2 KB)
• References

Open Access

Precision ring rolling technique and application in high-performance bearing manufacturing 03002

Lin Hua, Jiadong Deng and Dongsheng Qian

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152103002

• Abstract
• PDF (294.8 KB)
• References

Open Access

Microstructure and texture evolution in multi-pass warm rolled AZ31 magnesium alloy 03003

Di Liu and Zuyan Liu

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152103003

• Abstract
• PDF (645.9 KB)
• References

Open Access

Continuous extrusion and rolling forming technology of copper strip manufacture 03004

Xinbing Yun, Mo Zhou, Tian Tian and Ying Zhao

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152103004

• Abstract
• PDF (476.5 KB)
• References

Open Access

The combined ring rolling process and the stiffness condition 03005

Jian Lan, Wei Zhang, Lin Hua and Huajie Mao

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152103005

• Abstract
• PDF (323.6 KB)
• References

Open Access

Research on automatic loading & unloading technology for vertical hot ring rolling process 03006

Wang Xiaokai, Wang Dehui, Mei Xuesong, Hua Lin, Dai Yutong and Wu Jian

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152103006

• Abstract
• PDF (445.2 KB)
• References

Open Access

Investigation on dimensional accuracy and mechanical properties of cylindrical parts by flow forming 03007

Gangfeng Xiao, Qinxiang Xia, Xiuquan Cheng and Hui Long

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152103007

• Abstract
• PDF (591.5 KB)
• References

Open Access

Analysis of shearing deformation in rolling-spinning forming of Ti-6Al-2Zr-1Mo-1V tubes 03008

Jing Guo, Mei Zhan and He Yang

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152103008

• Abstract
• PDF (489.8 KB)
• References

Sheet Forming

Open Access

Current assisted superplastic forming of titanium alloy 04001

Guofeng Wang, Tao Zhao, Yuelin Wang, Xuesong Wu, Xiangxiang Dai and Qi Liu

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152104001

• Abstract
• PDF (550.7 KB)
• References

Open Access

Evaluation of control strategies in forming processes 04002

Stefan Calmano, Daniel Hesse, Florian Hoppe and Peter Groche

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152104002

• Abstract
• PDF (393.1 KB)
• References

Open Access

Effects of mechanical properties and geometric conditions on stiffness of Hyperboloid Shallow Shell 04003

Lihong Zhao, Haiping Yu, Zhongwen Xing and Chengxi Lei

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152104003

• Abstract
• PDF (224.8 KB)
• References

Open Access

Laser bending process of preloaded sheet metal 04004

Lang Xu, Weidong Li, Min Wan, Xiufeng Wang and Yaoguo Dong

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152104004

• Abstract
• PDF (450.2 KB)
• References

Open Access

A 3-D analysis of the sheared cross-section of electrical steel plates 04005

Heng-Sheng Lin, Yu-Da Liu, Hsin-Te Wang, Kun-Min Huang and Zhe-An Lin

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152104005

• Abstract
• PDF (601.5 KB)
• References

Open Access

Analysis of the strain behaviour of a friction stir processed superplastic aluminium alloy 04006

Donato Sorgente, Sabina Luisa Campanelli, Alessandro Stecchi and Nicola Contuzzi

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152104006

• Abstract
• PDF (381.9 KB)
• References

Open Access

Single point incremental forming of shape memory polymer foam 04007

Amirahmad Mohammadi, Hans Vanhove, Mariagioia Attisano, Giuseppina Ambrogio and Joost R. Duflou

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152104007

• Abstract
• PDF (528.4 KB)
• References

Open Access

Step by step control of a deep drawing process with piezo-electric actuators in serial operation 04008

Tobias Bäume, Wolfgang Zorn, Welf-Guntram Drossel and Gerd Rupp

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152104008

• Abstract
• PDF (316.1 KB)
• References

Open Access

FEA-based optimisation of a clinching process with an open multiple-part die aimed at damage minimisation in CR240BH-AlSi10MnMg joints 04009

Bernd-Arno Behrens, Anas Bouguecha, Milan Vucetic, Sven Hübner, Deniz Yilkiran, YiLin Jin and Ilya Peshekhodov

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152104009

• Abstract
• PDF (614.8 KB)
• References

Open Access

Investigation on creep age forming of AA2219 stiffened structures 04010

Haoliang Yang, Lidong Liu, Haipeng Chen, Liliang Wang and Tong Qin

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152104010

• Abstract
• PDF (566.7 KB)
• References

Open Access

Experimental investigation of deep drawing of C-rail benchmark using various lubricants 04011

Juan Liao and Xin Xue

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152104011

• Abstract
• PDF (438.7 KB)
• References

Open Access

Investigation of the deformation stability in the incremental sheet forming process 04012

S. Ai, B. Lu, H. Long, J. Chen and H. Ou

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152104012

• Abstract
• PDF (417.9 KB)
• References

Open Access

Numerical simulation and experimental investigation of ductile fracture in SPIF using modified GTN model 04013

Shakir Gatea, Bin Lu, Hengan Ou and Graham McCartney

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152104013

• Abstract
• PDF (441.7 KB)
• References

Open Access

Characterization of shape and dimensional accuracy of incrementally formed titanium sheet parts 04014

Amar Kumar Behera, Bin Lu and Hengan Ou

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152104014

• Abstract
• PDF (276.4 KB)
• References

Open Access

Metal forming technology for the fabrication of seamless Superconducting radiofrequency cavities for particle accelerators 04015

Vincenzo Palmieri

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152104015

• Abstract
• PDF (222.7 KB)
• References

Hot Stamping

Open Access

Probability assessment of mechanical trimming using hot half-trimming in hot stamping process 05001

Jun-Ho Shin, Kyung-Hun Lee, Byung-Min Kim and Dae-Cheol Ko

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152105001

• Abstract
• PDF (488.6 KB)
• References

Open Access

Forming and quenching behaviours in hot stamping of thin quenchable sheets 05002

Yuki Nakagawa, Tomoyoshi Maeno and Ken-ichiro Mori

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152105002

• Abstract
• PDF (555.3 KB)
• References

Open Access

Determination of the interfacial heat transfer coefficient in the hot stamping of AA7075 05003

Xiaochuan Liu, Kang Ji, Omer El Fakir, Jun Liu, Qunli Zhang and Liliang Wang

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152105003

• Abstract
• PDF (173.6 KB)
• References

Open Access

Investigation of the clinching process combines with hot stamping process for high-strength steel sheets 05004

Li-Wei Chen, Jian-Ming Huang and Yuan-Chuan Hsu

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152105004

• Abstract
• PDF (425.2 KB)
• References

Open Access

An experimental investigation for macro-textured tool in hot stamping 05005

Kailun Zheng, Jianguo Lin, Denis J. Politis and Trevor A. Dean

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152105005

• Abstract
• PDF (493.7 KB)
• References

Open Access

HFQ forming of AA6082 tailor welded blanks 05006

Jun Liu, Haoxiang Gao, Omer El Fakir, Liliang Wang and Jianguo Lin

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152105006

• Abstract
• PDF (496.4 KB)
• References

Open Access

Hot stamping of an Al-Li alloy: A feasibility study 05007

Haoxiang Gao, Tianxin Weng, Jun Liu, Chang Li, Zhiqiang Li and Liliang Wang

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152105007

• Abstract
• PDF (371.2 KB)
• References

Open Access

Knowledge based system to support the design of tools for the HFQ forming process for aluminium-based products 05008

Nikolaos Mekras and Ioannis Artemakis

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152105008

• Abstract
• PDF (598.0 KB)
• References

Open Access

Development of low-friction and wear-resistant surfaces for low-cost Al hot stamping tools 05009

Y. Dong, D. Formosa, J. Fernandez, X. Li, G. Fuentes, K. Zoltan and H. Dong

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152105009

• Abstract
• PDF (422.6 KB)
• References

Open Access

Coating-substrate-simulations applied to HFQ^® forming tools 05010

Jürgen Leopold, Rene Schwarz and Reiner Wohlgemuth

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152105010

• Abstract
• PDF (448.9 KB)
• References

Open Access

An investigation of a new 2D CDM model in predicting failure in HFQing of an automotive panel 05011

Mohamed Mohamed, Nan Li, Liliang Wang, Omer El Fakir, Jianguo Lin, Trevor Dean and John Dear

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152105011

• Abstract
• PDF (587.5 KB)
• References

Open Access

Painting of aluminium panels – state of the art and development issues 05012

Zhenhai Xu, Gerald Anyasodor and Yi Qin

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152105012

• Abstract
• PDF (382.1 KB)
• References

Open Access

Analysis of new Gleeble tensile specimen design for hot stamping application 05013

Manikandan Ganapathy, Nan Li, Jianguo Lin, Michael Abspoel, Hensen Guido and Debashish Bhattacharjee

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152105013

• Abstract
• PDF (473.2 KB)
• References

Open Access

Design considerations for HFQ^® hot stamped aluminium structural panels 05014

Alistair Foster, Damian Szegda and John Sellors

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152105014

• Abstract
• PDF (272.9 KB)
• References

Open Access

Investigation on fast and energy-efficient heat treatments of AA6082 in HFQ processes for automotive applications 05015

Nan Li, Jinghua Zheng, Chao Zhang, Kailun Zheng, Jianguo Lin and Trevor A. Dean

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152105015

• Abstract
• PDF (522.1 KB)
• References

Hydroforming and Tube Forming

Open Access

The influence of axial compressive stresses on the formability and scattering of process parameters in micro-hydroforming processes of tubes 06001

Christoph Hartl, Andreas Chlynin and Max Radetzky

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152106001

• Abstract
• PDF (371.6 KB)
• References

Open Access

Wrinkling behavior in tube hydroforming coupled with internal and external pressure 06002

X.L. Cui, X.S. Wang and S.J. Yuan

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152106002

• Abstract
• PDF (590.6 KB)
• References

Open Access

A technology to improve formability for aluminum alloy thin-wall corrugated sheet component hydroforming 06003

Lihui Lang, Deshuai Kong, Zhiying Sun, Shangwen Ruan and Shanshan Gu

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152106003

• Abstract
• PDF (453.3 KB)
• References

Open Access

New lightweight construction prospects enabled by hydroforming 06004

Markus Werner, Verena Psyk, André Albert, Marco Pröhl, Petr Kurka, Dirk Landgrebe and Welf-Guntram Drossel

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152106004

• Abstract
• PDF (602.6 KB)
• References

Open Access

Deformation behaviour of laser-welded tube blank of TA15 Ti-alloy for gas forming at elevated temperature 06005

Kehuan Wang, Gang Liu and Shijian Yuan

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152106005

• Abstract
• PDF (572.9 KB)
• References

Open Access

FluidForming – Hydroforming reinvented 06006

Jürgen Pannock, Reinhold Wesselmann, Andre Lückmann and Paul R. Benny

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152106006

• Abstract
• PDF (449.5 KB)
• References

Open Access

The effect of pressurization path on high pressure gas forming of Ti-3Al-2.5V at elevated temperature 06007

Gang Liu, Jianlong Wang, Kexin Dang and Shijian Yuan

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152106007

• Abstract
• PDF (454.8 KB)
• References

Open Access

Investigation into the factors that influence inverse bulging effect during sheet hydro-mechanical deep drawing 06008

Lihui Lang, Yao Wang, Kui Li, Shiyue Li, Jianmin Zhang and Quanda Zhang

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152106008

• Abstract
• PDF (541.9 KB)
• References

Open Access

Production of high strength hollow shafts using tool hardening and Q-P process 06009

Bohuslav Masek, Ivan Vorel, Kateřina Opatová, Petr Kurka, Frank Hahn and Uwe Mahn

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152106009

• Abstract
• PDF (347.8 KB)
• References

Materials and Characterisations

Open Access

Fracture performance of high strength steels, aluminium and magnesium alloys during plastic deformation 07001

Haiyan Yu and You Wang

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152107001

• Abstract
• PDF (535.8 KB)
• References

Open Access

Developing ultrafine-grained materials with high strength and good ductility for micro-forming applications 07002

Yi Huang, Jie Xu and Terence G. Langdon

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152107002

• Abstract
• PDF (550.3 KB)
• References

Open Access

The sectional size effect on the deformation behaviour of Inconel 718 at different temperatures 07003

R. Zhao, M. Wan, J.Q. Han and B.B. Liu

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152107003

• Abstract
• PDF (271.2 KB)
• References

Open Access

Characterization of precipitates in strip-cast 2.7%Si steel under different heat treatment conditions 07004

Junsheng Mou, Haitao Jiao, Qiongqiong Han, Yuanxiang Zhang, Yang Wang, Feng Fang, Xiang Lu, Zhifeng Li and Yunbo Xu

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152107004

• Abstract
• PDF (473.4 KB)
• References

Open Access

A new integration of hot pressing and carbon partition process to produce high strength steel components with better toughness 07005

Shi-hong Zhang, Hong-wu Song, Fei-bao Zhang and Wei-jie Liu

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152107005

• Abstract
• PDF (420.8 KB)
• References

Open Access

A ductile fracture criterion with Zener-Hollomon parameter of pure molybdenum sheet in thermal forming 07006

Chu Wang, Min Wan, Yingke Zhou and Xiangdong Wu

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152107006

• Abstract
• PDF (536.2 KB)
• References

Open Access

Study on elastic-plastic behaviour of inclusions in cold drawn wire by using reverse analysis and nanoindentation test 07007

Kyung-Hun Lee, Jung-Min Lee, Se-In Ji, Jae-Hong Kim, Dae-Cheol Ko and Byung-Min Kim

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152107007

• Abstract
• PDF (151.7 KB)
• References

Open Access

Temperature-dependent yield criterion for high strength steel sheets under warm-forming conditions 07008

Zhengyang Cai, Keshan Diao, Xiangdong Wu, Min Wan and Cheng Cheng

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152107008

• Abstract
• PDF (263.3 KB)
• References

Open Access

Compression deformation behaviors of sheet metals at various clearances and side forces 07009

Mei Zhan, Xianxian Wang, Jian Cao and He Yang

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152107009

• Abstract
• PDF (441.1 KB)
• References

Open Access

Softening behaviour of Fe-6.5%Si steel during warm deformation process 07010

Changsheng Li, Chenglin Yang, Ban Cai, Guojun Cai and Liqing Chen

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152107010

• Abstract
• PDF (428.2 KB)
• References

Open Access

Mechanical properties and deformation behaviour of Fe-(20/27)Mn-4Al-0.3C austenitic steels 07011

Biao Ma, Changsheng Li, Yahui Han, Yanlei Song and Liqing Chen

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152107011

• Abstract
• PDF (758.9 KB)
• References

Open Access

Deformation mechanism of cryorolled Fe-36%Ni strip steel 07012

Changsheng Li, Jianjun Zheng, Yanlei Song, Shuai He and Liqing Chen

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152107012

• Abstract
• PDF (497.8 KB)
• References

Tooling and Heat Treatment

Open Access

Bimetal-gradient-layer surfacing of forging die manufacturing based on cast-steel substrate 08001

Jiansheng Zhang, Jie Zhou, Fei Gao, Zhu Su and Shun Lu

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152108001

• Abstract
• PDF (680.4 KB)
• References

Open Access

Structural materialization of stainless steel molds and dies by the low temperature high density plasma nitriding 08002

Tatsuhiko Aizawa, Tatsuya Fukuda and Hiroshi Morita

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152108002

• Abstract
• PDF (687.5 KB)
• References

Open Access

Effect of post weld heat treatment on wear resistance of hot forging cast steel die coated with surfacing layer 08003

Wujiao Xu, Xin Ma, Nongjie Tang, Li Zhu, Wuhua Li and Yongfeng Ding

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152108003

• Abstract
• PDF (630.6 KB)
• References

Open Access

A layered cooling process in whole quenching process for lightweight front axle beam 08004

Kai Gao, Xunpeng Qin, Zhou Wang, Shengxiao Zhu, Zhenyu Yuan and Zhenhua Zhu

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152108004

• Abstract
• PDF (674.7 KB)
• References

Open Access

Path planning and kinematics simulation of surfacing cladding for hot forging die 08005

Huajun Wang, Wanxia Fu, Hengan Ou and Xuan Tang

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152108005

• Abstract
• PDF (687.2 KB)
• References

Open Access

Effect of annealing temperature on microstructure and mechanical properties of a high Al-low Si TRIP steel 08006

Yang Zhao, Liqing Chen, Qiangjun Yan and Changsheng Li

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152108006

• Abstract
• PDF (565.4 KB)
• References

Open Access

Effect of higher heating rate during continuous annealing on microstructure and mechanical properties of cold-rolled 590 MPa dual-phase steel 08007

Yonggang Deng, Hongshuang Di, Jiecen Zhang and Liqing Chen

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152108007

• Abstract
• PDF (935.6 KB)
• References

Open Access

Effect of deep cryogenic treatment and tempering on microstructure and mechanical behaviors of a wear-resistant austempered alloyed bainitic ductile iron 08008

Liqing Chen, Junjun Cui and Weiping Tong

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152108008

• Abstract
• PDF (569.8 KB)
• References

Open Access

Nitriding of nanocrystalline pure Fe induced by surface mechanical attrition treatment 08009

Yuzhu Fu, Weiping Tong, Mengying Gong, Haizhi Li and Liqing Chen

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152108009

• Abstract
• PDF (477.0 KB)
• References

Open Access

Qualification of laser based additive production for manufacturing of forging Tools 08010

Daniel Junker, Oliver Hentschel, Michael Schmidt and Marion Merklein

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152108010

• Abstract
• PDF (300.6 KB)
• References

Open Access

Dry metal forming of high alloy steel using laser generated aluminum bronze tools 08011

Hannes Freiße, Henry Köhler, Thomas Seefeld and Frank Vollertsen

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152108011

• Abstract
• PDF (483.0 KB)
• References

Open Access

Development, characterization and testing of tungsten doped DLC coatings for dry rotary swaging 08012

Henning Hasselbruch, Marius Herrmann, Andreas Mehner, Hans-Werner Zoch and Bernd Kuhfuss

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152108012

• Abstract
• PDF (536.7 KB)
• References

Micro-Forming

Open Access

Review on progressive microforming of bulk metal parts directly using sheet metals (Keynote Paper) 09001

M.W. Fu and B. Meng

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152109001

• Abstract
• PDF (765.7 KB)
• References

Open Access

Plasma-nitriding assisted micro-texturing into stainless steel molds 09002

Tatsuhiko Aizawa, Hiroaki Suga and Tetsuya Yamaguchi

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152109002

• Abstract
• PDF (597.6 KB)
• References

Open Access

Experimental and numerical study of micro deep drawing 09003

Liang Luo, Zhengyi Jiang, Dongbin Wei, Ken-ichi Manabe and Hideki Sato

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152109003

• Abstract
• PDF (382.0 KB)
• References

Open Access

Investigation into high-frequency-vibration assisted micro-blanking of pure copper foils 09004

Chunju Wang, Bin Guo, Debin Shan and Yi Qin

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152109004

• Abstract
• PDF (316.8 KB)
• References

Open Access

An evaluation of formability using micro-embossing on an ultrafine-grained magnesium AZ31 alloy processed by high-pressure torsion 09005

Jie Xu, Guangnan Xing, Debin Shan, Bin Guo and Terence G. Langdon

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152109005

• Abstract
• PDF (432.2 KB)
• References

Open Access

Surface accuracy achieved by upsetting of preforms generated by laser rod end melting 09006

Heiko Brüning and Frank Vollertsen

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152109006

• Abstract
• PDF (440.4 KB)
• References

Open Access

Micro-lateral extrusion of Zr₅₅Cu₃₀Al₁₀Ni₅ bulk metallic glass under low-frequency vibration loading 09007

Jinyang Li, Zhizhen Zheng, Xiao Wu and Jianjun Li

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152109007

• Abstract
• PDF (300.6 KB)
• References

Open Access

Development of in-situ observation system of dynamic contact interface between dies and materials during microforming operation 09008

Tetsuhide Shimizu, Tai Kakegawa and Ming Yang

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152109008

• Abstract
• PDF (566.6 KB)
• References

Open Access

Tribological impact of the finishing technology onto meso- and microforming processes 09009

Stephan F. Jahn, Benedikt Müller, Felix S. Hilfinger and Andreas Schubert

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152109009

• Abstract
• PDF (735.0 KB)
• References

Open Access

Influence of size effects on material properties and springback behavior of metal foils in micro bending: A review 09010

Xiaoyu Liu, Shiping Zhao, Yi Qin and Wan Adian Wan Nawang

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152109010

• Abstract
• PDF (361.2 KB)
• References

Open Access

Development of microforming process combined with selective chemical vapor deposition 09011

Kazushi Koshimizu, Tetsuhide Shimizu and Ming Yang

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152109011

• Abstract
• PDF (737.4 KB)
• References

Open Access

Influence of the relative rotational speed on component features in micro rotary swaging 09012

Svetlana Ishkina, Bernd Kuhfuss and Christian Schenck

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152109012

• Abstract
• PDF (718.5 KB)
• References

Open Access

Influence of metal inserts with microformed edges on subsequent injection assembly moulding for media tight electronic systems 09013

Philipp Frey, Martina Heinle, Dietmar Drummer and Marion Merklein

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152109013

• Abstract
• PDF (497.9 KB)
• References

Open Access

Influence of tribology size effect on Stribeck curve in micro deep drawing 09014

Hendrik Tetzel

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152109014

• Abstract
• PDF (363.8 KB)
• References

Open Access

An experimental study on the springback in bending of w-shaped micro sheet-metal parts 09015

Wan-Adlan Wan-Nawang, Yi Qin and Xiaoyu Liu

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152109015

• Abstract
• PDF (539.7 KB)
• References

Open Access

Study on micro extra deep drawing process with ultrahigh fluid pressure and press motion controls 09016

Hideki Sato, Daiki Kondo, Ken-ichi Manabe and Kuniyoshi Ito

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152109016

• Abstract
• PDF (559.6 KB)
• References

Open Access

Development of micro rotary swaging tools of graded tool steel via co-spray forming 09017

Chengsong Cui, Alwin Schulz, Eric Moumi, Bernd Kuhfuss, Florian Böhmermann and Oltmann Riemer

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152109017

• Abstract
• PDF (700.5 KB)
• References

Powder Sintering

Open Access

Forming of micro-components by electrical-field activated sintering 10001

Jie Zhao, Yi Qin, Kunlan Huang, Muhammad Bin Zulkipli and Hasan Hijji

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152110001

• Abstract
• PDF (618.6 KB)
• References

Open Access

Microstructure evolution and surface cleaning of Cu nanoparticles during micro-forming fields activated sintering technology 10002

Mingxia Wu, Gang Yang, Yi Yang, Yi Qin and Deqiang Yin

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152110002

• Abstract
• PDF (403.0 KB)
• References

Open Access

Fabrication of NiTi shape memory alloy by Micro-FAST 10003

Kunlan Huang, Yi Qin, Jie Zhao, Muhammad Bin Zulkipli and Hasan Hijji

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152110003

• Abstract
• PDF (541.4 KB)
• References

Open Access

Simulation of heat distribution in particles during micro field-activated sintering by considering electrical concentration and contact resistance 10004

Dan Zhao, Jie Wang, Yi Yang, Gang Yang, Yi Qin, Jian Liu and Deqiang Yin

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152110004

• Abstract
• PDF (536.7 KB)
• References

Open Access

Towards low-friction and wear-resistant plasma sintering dies via plasma surface co-alloying CM247 nickel alloy with V/Ag and N 10005

Zhenxue Zhang, Xiaoying Li, Hanshan Dong, Eluxka Almandoz Sánchez, Gonzalo García Fuentes and Yi Qin

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152110005

• Abstract
• PDF (890.5 KB)
• References

Open Access

Forming of titanium and titanium alloy miniature-cylinders by electrical-field activated powder sintering and forming 10006

Muhammad Zulkipli, Yi Qin, Kunlan Huang, Hasan Hijji, Yihui Zhao and Jie Zhao

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152110006

• Abstract
• PDF (358.2 KB)
• References

Open Access

Effect of soaking time on the preparation of porous NiTi alloy during fields-activated micro-sintering and forming technology 10007

Dan Zhao, Yi Yang, Jian Liu, Gang Yang, Yi Qin and Deqiang Yin

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152110007

• Abstract
• PDF (306.8 KB)
• References

Other Manufacturing Processes

Open Access

Optimisation of component performance via structuring 11001

Verena Psyk, Petr Kurka, Simon Kimme, Markus Werner, Dirk Landgrebe, Andreas Ebert and Mathias Schwarzendahl

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152111001

• Abstract
• PDF (726.8 KB)
• References

Open Access

Effective electromagnetic forces in thin sheet metal specimen 11002

L. Langstädtler, C. Schenck and B. Kuhfuss

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152111002

• Abstract
• PDF (643.3 KB)
• References

Open Access

Study of forming and Welding performance of Y-shaped transition ring for large launch vehicle tank 11003

Zhilong Chang, Zhenggen Hu, Cheng Huang, Li Zhou, Guanri Liu and Yihua Mo

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152111003

• Abstract
• PDF (543.7 KB)
• References

Open Access

Adjustable broaching tool for tolerance compensation in precision manufacturing 11004

Emil Nielsen, Rasmus Eriksen, Nikolas Paldan and Mogens Arentoft

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152111004

• Abstract
• PDF (427.6 KB)
• References

Open Access

Effects of process parameters on the mechanical properties and microstructure of Al-steel joint by magnetic pulse welding 11005

Zhenghua Meng, Peng Yang, Yu Lei, Shangyu Huang and Lin Hua

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152111005

• Abstract
• PDF (546.5 KB)
• References

Open Access

Effect of ball milling time on nanocrystalline powders and bulk ultrafine-grained Mg-3Al-Zn alloy 11006

Jie Feng, Hong-fei Sun and Wen-bin Fang

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152111006

• Abstract
• PDF (598.3 KB)
• References

Modelling and Design

Open Access

Numerical simulation of the dynamic recrystallization behaviour in hot precision forging helical gears 12001

Wei Feng, Lin Hua, Huajie Mao and Jian Lan

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152112001

• Abstract
• PDF (476.3 KB)
• References

Open Access

Investigate earing of TWIP steel sheet during deep-drawing process by using crystal plasticity constitutive model 12002

J. Yang, Y. Cai, C.Y. Sun, B. Wang and X.R. Guo

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152112002

• Abstract
• PDF (392.4 KB)
• References

Open Access

FEM simulation of infeed rotary swaging with structured tools 12003

Marius Herrmann, Christian Schenck and Bernd Kuhfuss

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152112003

• Abstract
• PDF (623.9 KB)
• References

Open Access

Finite element analysis of advanced bicycle precision brake disk forming technology 12004

Dyi-Cheng Chen, Jing-Hao Kang and Chia-Chun Lai

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152112004

• Abstract
• PDF (739.0 KB)
• References

Open Access

Investigation of the initiation and propagation of cracks in the coated surface of spur gear: An application of irreversible cohesive zone model 12005

Jiling Feng, Yi Qin and Hanshan Dong

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152112005

• Abstract
• PDF (615.3 KB)
• References

Open Access

Material modelling for creep-age forming of aluminium alloy 7B04 12006

Aaron C.L. Lam, Zhusheng Shi, Xia Huang, Yo-Lun Yang, Yuansong Zeng and Jianguo Lin

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152112006

• Abstract
• PDF (1.098 MB)
• References

Open Access

Tool life prediction under multi-cycle loading conditions: A feasibility study 12007

Xi Yuan, Du Zhou, Denis J. Politis, Guojia Ma and Liliang Wang

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152112007

• Abstract
• PDF (335.6 KB)
• References

Open Access

Constitutive modelling of creep-ageing behaviour of peak-aged aluminium alloy 7050 12008

Yo-Lun Yang, Aaron C. L. Lam, Zhusheng Shi, Jianguo Lin and Rajab Said

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152112008

• Abstract
• PDF (402.8 KB)
• References

Open Access

Implementation of the Bai & Wierzbicki fracture criterion in QForm and its application for cold metal forming and deep drawing technology 12009

Yury Gladkov, Ilya Peshekhodov, Milan Vucetic, Anas Bouguecha and Bernd-Arno Behrens

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152112009

• Abstract
• PDF (517.7 KB)
• References

Open Access

Finite element modelling of deformation behaviour in incremental sheet forming of aluminium alloy 12010

Tsung-Han Huang and Cho-Pei Jiang

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152112010

• Abstract
• PDF (508.5 KB)
• References

Open Access

Laser-assisted machining process simulation for precision mould/die manufacturing 12011

Quanren Zeng and Yi Qin

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152112011

• Abstract
• PDF (546.6 KB)
• References

Open Access

Research and development of process innovation design oriented web-based process case base system 12012

Xin Guo, Wu Zhao, Jie Wang, Cheng Wang, Kai Zhang and Qian Hui

Published online: 10 August 2015

DOI: https://doi.org/10.1051/matecconf/20152112012

• Abstract
• PDF (694.6 KB)
• References